Tender For Yearly Rate Contrac in Chiplun - Complete Tender Details

Tender For Yearly Rate Contract For Supplying Material For Civil Department Chiplun Municipal Council Chiplun - Indian W.c. Pan, European W.c. Pan, Pvc Factory Made Solid Panel Door Shutter With Stainless Steel Fixutres & Fastening, Pvc Factory Made Flush Door 30 Mm With Stainless Steel Fixutres & Fastening, Aldrop Stainless Steel 300*16mm, Iron Hinges Chromium Plated 125mm, Tower Bolt M.s. Chromium Plated 10mm Dia,length 300mm, P.v.c. 110 Mm Rain Water Pipe 6kg/cm2 Pressure, P.v.c. Pipe 75mm Dia.4 Kg/cm2 Pressure(class Ii), Cement Bag, Black Kadappa (one Side Polish) (machine Cut) 35mm Thick, Polished Shahabad Machine Cut 25mm Thick, G.i. Sheet (plain) 22 Bwg, Structural Steel (i Beam/ C Channel), Tmt Fe - 500( 6mm,8mm,10mm,12mm Steel), G.i. J Or L Hooks, Aggregates 6 Mm Nominal Size, Aggregates 13.2/12.5 Mm Nominal Size, Aggregates 20 Mm Nominal Size, Aggregates 40 Mm Nominal Size, Aggregates 90 Mm To 45 Mm, Quarry Spall, Murum At Site, Sand - Natural/v.s.i.(vertical Shaft Impact Crusher)quality Artifitial Sand, Bitumen Vg 30 (packed) (60/70), Mazdoor Unskilled, Hydraulic Excavator (wheeled), Tractor With Rotevator, Hydraulic Excavator (beml Be 200, Tata Hitachi Ex200 Or Equivalent), Crane 40 Mte Capacity, Static Road Roller 8 Mt, Tipper -10 Cum, Oil Bound Distemper, Oil Paint, Chunam / White Lime Powder, Red Powder / Geru, Barbed Wire, Chain Link 3 - 0" , 4 - 0" And 5 - 0" Wide, Ist Class Bricks (red), Heavy Duty Interlocking Concrete Block 60mm Thick Coloured, Electric Gas Cutting, Glass Plain 5mm, A.c.corrugated Sheet 6mm Thick, R.c.c.pipe 1200mm Dia.(np3)2.5m Long, R.c.c.pipe 900mm Dia.(np3)2.5m Long, R.c.c.pipe 600mm Dia.(np3)2.5m Long, R.c.c.pipe 450mm Dia.(np3)2.5m Long, R.c.c.pipe Np2 Class 300mm Dia. 2m Long, R.c.c.pipe Np2 Class 225mm Dia. 2m Long, Road Barricade Perforated Fench(2000 X 1000 X 40 Mm ), Hydraulic Door Closer, Truck Trailor 30 Mt Capacity, Siporex Block 75x240x650 Mm, Jali Welded Mesh 50*25 11 Guage, Mosquito Proof Nylone Net, Road Marking Paint As Per Is 164, Binding Wire, Cement Paint, G.i. Nut Bolt, Rcc Pole, Providing Uncoursed Rubble Masonry Of Trap / Granite / Quartzite / Gneiss Stones In Cement Mortar 1:6 In Foundation And Plinth Of Inner Walls / In Plinth Of External Walls Including Bailing Out Water Manually , Striking Joints On Un Exposed Faces And Watering Etc.complete., Providing Laterite Stone Masonry In Cement Mortar 1:6 Infoundation And Plinth Including Striking Joints On The Unexposed Faces And Watering Complete., Providing And Fixing In Position Gypsum Board False Ceiling With 12.5 Mm Thick Gypsum Boards, Screwed/fixed To The Under Structure Of Suspended G.i. Grid Constructed And Suspended From The Main Ceiling Consisting Of Ceiling Sections Of Size 25 X 50 Mm Maximum Center To Center Distance Of 600 Milimetre Perimeter Channel And Intermediate Channels At Maximum Center To Center Distance 1200 Milimetre Galvanized Grid Should Be Fixed To Reinforced Cement Concrete Slab. The Gypsum Board Should Be Fixed To Galvanized Iron Grid With Necessary Screws. The Boards Should Be Taped And Filled From Underside To Give Smooth, Seamless Ceiling. The Rate Should Include Necessary Additional Ceiling Sections And Intermediate Channels. Additional Intermediate Channels Should Be Fixed To Strap Hangers For Additional Support To Prevent Strapping At Every 1200 Milimetre Item To Be Completed In All Respect Including Necessary Sleeves For Ducts Finishing Of Joints Cut Outs, Painting Including Labour, Material, Lifts Etc. All Complete., Providing And Laying In Situ / Ready Mix M-15 Plain Cement Concrete Of Trap /granite/quartzite/ Gneiss Metal For Cast In Citu Piers, Abutment, Returns, Wings Etc. Including Provision Of "v" Shaped False Joints To Form Suitable Panels On The Faces To Approve Design With Compacting By Vibrating And Curing Complete, Including Plywood/steel Form Work Centering ( Excluding Dewatering By Means Of Pump) And Including Bailling Out Water And Curing Finishing In Cm 1:3 Etc. Complete. As Directed By Engineer In Charge Basic Rate Shall Be Increased For Height Above 5.00 M, Providing Dry/ Trap/ Granite/ Quartzite/ Gneiss Rubble Stone Soling 15 Cm To 20 Cm Thick Including Hand Packing And Compacting Etc. Complete., Providing And Laying Cast In Situ/ready Mix Cement Concrete In M-10 Of Trap/ Granite/ Quartzite/ Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Laying/pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Microprocessor Based Plc With Scada Enabled Reversible Drum Type Mixer/concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (natural Sand / Crushed Sand Vsi Grade Finely Washed Etc), Providing Railing Of Mild Steel Angle Post 2.0m Center To Center Of Section 75mm X 75mm X 10mm Or Equivalent I/c Section Of Height 1.05 Above Bridge Surface With Minimum Anchor Length Of 30cm Including Hold Fast Of 25mm Diameter Ms Bar Welded At The Bottom And Concreting Of 1:3:6 Of Size 30cm X 30cm X 30cm With Three Rows Of 40mm B Class Gi Pipe Provided At 30cm On Center To Center Including Scaffolding And One Coat Of Anticorrosive Paint With Two Coats Of Oil Painting, Curing Of Concrete Etc. Complete., Providing And Fixing Colour Coated Zincalume ( R ) Az150 ( Min 150 Gms/sq.mt. Total On Each Side ) Profiled Sheets For Roofing. The Feed Material Is Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness ( Bmt ) (0.5 Mm Tct ), Hi-strength Steel With Min.550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-zinc Alloy (55% Aluminium 43.4% Zinc 1.6% Silicon) With Colorbond ( R ) Steel Quality Super Durable Polyester Paint Coat ( With Inorganic Pigment). The Paint Shall Have A Total Coating Thickness Of Nominal 35 Um, Comprising Of Nominal 25 Um Exterior Coat On Top Surface And Nominal 10 Um Reverse Coat On Back Surface. Profile Sheet Shall Have Nom. 950-1050 Mm Effective Cover Width And Nominal 25-30 Mm Deep Ribs With Subtle Square Fluting In The Five Pan At Nominal 180-250 Mm Center- To-center. The End Rib Shall Be Designed For Anti-capillary Groove. And Return Leg. The Feed Material Should Have Coil Manufacturers Product Details Marked A Regular Interval. Including Fasteners With Min. Fastened With Min. 25 Um Zinc-tin Alloy Coated, Hex Head, Self-drilling Screw Etc. Complete. (weight Of Profile 4.52 Kilogram/ One Square Metre), Providing, Fabricating And Erecting At Site Of Work The Tubular Steel Structure (shed) As Per Standard Design And Specifications Having Various Spans In Between Trusses And In Multiples Of Standard Length Of Bays As Specified As Per Standard Specifications, Inclusive Of Cost Of Steel Tubular Trusses, Tubular Columns Purlins, Tie Runners, Foundation Bolts, Base Plates, Nuts And Bolts, Welding Wherever Required Etc. As Per Detailed Drawing Inclusive Of One Coat Of Anticorrosive Paint And Two Coats Of Oil Painting Of Approved Quality And Shade Etc. Complete. Spec. One Number : As Directed By Engineer-in-charge., Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.the Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-reflectance Of The Reflecting Panel, To The Engineer., Providing And Laying Hot Applied Thermoplastic Road Marking Strip On Bituminous Surface Of Specified Shade/ Colour Of 2.5 Mm Thick Including 1.5 Refractive Index Reflectorizing Glass Beads @ 250gm/sqm .thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc 35:2015. Initial Dry Reflectivity Rl Shall Be > 250 Mcd/sqm/lux Measured In The Initial 7 Days And Sustained Reflectivity Rl Of 100 Mcd/sqm/ Lux And Qd Of 100 Mcd/sqm/ Lux Measured At The End Of 2 Years By Means Of A Standard Reflectometer Of Zehntner, Easylux, Delta Make Capable Of Measuring Rl & Qd Both According To Irc 35:2015 Clause 15.5. The Finished Surface To Be Level, Uniform, And Free From Streaks And Holes Complete As Per Direction Of Engineer-in-charge And In Accordance With Applicable Specifications.(refer Morth Clause 803 For Technical Specification And Performance For Irc 35:2015)., 9providing And Fixing Mandatory/regulatory Sign Boards In Circular Shape Of ______ Mm Dia Made Out Of ____mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-prismatic Grade Sheeting-hip) Having Pressure Sensitive/heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3 Supported With Back Support Frame 25mm X 25mm X 3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M. S. Angle Iron Post Of Size 65 Mm X 65 Mm X 6 Mm, 3.45 M Long, Duly Painted With With Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.i. Fixtures Etc; Fixing The Boards In M25 Grade Concrete Block Of Size 60cm X 60cm X 75cm Including Transportation Etc; Complete. Class B ( Type Iv High Intensity Micro-prismatic Grade Sheeting-hip) Shall Have 7 Years Written Warranty From The Manufacturer And Authorised Distributor/convertor Issued For Field Performance Including The Screen Printed Areas And Cut-out Sheeting And Cut-out Durable Transparent Overlay Film And This Warranty Certificate In Original Should Be Submitted To The Engineer In Charge By The Contractor/supplier., Providing And Fixing Hume Pipe Septic Tank 900mm Diameter With Vent Pipe And Cap Including Necessary (including Excavation And Laying), Ladder, Bitumen Boiler Oil Fired (2000 Ltr), Providing Earthwork In Embankment With Approved Materials Obtained From Other Sources Upto Lead Of 50m. Including All Lifts, Laying In Layers Of 20 Cm. To30cm. Thickness Breaking Clods,dressing To The Required Lines, Curves, Grades & Section,watering And Compaction With Vibratory Roller With V-sat Attachment To Achieve Not Less Than 97% Of Standard Proctor Density Etc. Complete ( Material Obtained From Other Sources), Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting With Vibratory Roller To The Required Density. By Mechanical Means -grading I (using Screening Type B (11.2 Mm) Aggregate), Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting With Vibratory Roller To The Required Density. By Mechanical Means - Grading Ii (using Screening Type B (11.2 Mm) Aggregate), Providing And Constructing 50 Mm. Thick Modified Penetration Macadam (mpm) Road Surface Including All Materials, Preparing The Existing Road Surface, Spreading 40mm. Stone Layers Metal 100% Crusher Broken Metal With Conical Crusher Palnt, Heating And Spraying The Bitumen Of Specified Grade @ 1.75 Kg / Sqm, Spreading 12mm.size Chips Compacting With Static Roller Having Weight 8 To 10 Mt. To Achive The Desired Degree Of Compaction As Per Technical Specification Clause 506 Etc.complete, Including Applying Tack Coat At The Rate Of 0.30 Kg Sqm.on Existing Bitumen Surface. (vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates), Providing 20mm Thick Premix Bituminous Carpet Including Supplying All Materials, Preparing And Clearing The Base, Heating Bitumen Applying Tack Coat At Specified Rate,mixing Hot Bitumen And Chips Lalying The Carpet Layer And Compacting Etc.complete.by Bulk Asphalt.(excluding Tackcoat),(cold Mix With Prior Aooroval), Providing Bituminous Type A Liquid Seal Coat On Bituminous Surface Including Supplying All Materials And Bitumen Of Specified Grade Preparing Existing Road Surface, Heating And Applying Bitumen @ 0.98 Kgsqm. By Mechanical Means, Spreading Chips And Rolling, By Static Roller Having Weight 8 To 10 Mt. Etc. Complete. (vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates), Providing And Constructing 75 Mm. Thick Modified Penetration Macadam (mpm) Road Surface Including All Materials, Preparing The Existing Road Surface, Spreading 40 Mm. Stone Metal Layers 30% Crusher Broken Metal + 70% Hand Broken (by Breaking Rubble Obtained By Blasting) Heating And Spraying The Bitumen Of Specified Grade @ 2 Kg/sqm, Spreading 12 Mm.size Chips Compacting With Three Wheel Static Roller Having Weight 8 To 10 Mt. To Achive The Desired Degree Of Compaction As Per Technical Specification Clause 506 Etc. Complete. Including Picking Of Existing Wbm Surface. (vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates), Bituminous Macadam:--providing And Laying Bituminous Macadam Using Crushed Aggregate Of Grading 1, Premixed With Bituminous Binder, Transported At Site With Vts, Laid Over A Previously Prepared Surface , Finished To The Required Grade ,level, Alignment,and Rolling To Achieve The Desired Density For 80/100 Mm Compacted Thickness With Drum Mix Type Hot Mix Plant With Scada Having Complying Essential Features Of Hot Mix Plant As Per Irc-27 2009 Specified Conditions And Attachments Such As Electronic Load Sensor Based Belt Conveyers,automatic Synchronization Of Bitumen And Aggregate Fedder,built In Dust Controller System And Plc For Drum Mix Plant ,sensor Paver,and Vibratory Roller Excluding Prime/tack Coat Etc. Complete --bitumen 3.30% Of Specified Grade (vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates), Open Graded Premix Surfacing- Providing And Laying Ogc 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Premixed With Bituminous Binder Transported To Site With Vts , Laid Over A Previously Prepared Surface, Finished To The Required Grade, Level, Alignment, And Rolling To Achieve The Desired Compaction But Excluding Prime / Tack And Seal Coat. For Bitumen Of Specified Grade--using Drum Mix Type Hot Mix Plant With Scada, Paver And Vibratory Roller ( Over Mpm Surface) (vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates), Mazdoor Unskilled