Tender For The Supply Install in Chennai - Complete Tender Details

Tender For The Supply, Installation, Integration, Testing And Commissioning Of Cameras, Cine Lenses, Camera Accessories And Allied Equipment For Tngmgrfti On Academic Pricing On Turnkey Basis - Camera Bodies, Nikon Zr: Full-frame 6k Cinema Camera, Nikon Z Cinema Line | Nikon Z Mount | 24.5 Mp Partially-stacked Full-frame Cmos, 6048 X 3402 Px, 35.9 X 23.9 Mm | Expeed 7 Image Processor | Internal 6k 60p Recording In R3d Ne (redcode), N-raw, Prores Raw And Prores 422 Hq | Announced 10 Sep 2025, Released 24 Oct 2025 | Accepts Nikkor Z Lenses And Red Z-mount Pl Adapters | Supplied As Camera Body, Red Komodo X (6k S35) - Nikon Z Mount: Super 35 Mm Global Shutter Cmos Cinema Camera | 19.9 Mp, 6144 X 3240 Px, 27.03 X 14.26 Mm (30.56 Mm Diagonal), 16.5+ Stops Dynamic Range | Integrated Locking Nikon Z Mount With Electronic Communication, Supports /i Pl Lenses Via Red Pl Adapters | 80 Fps At 6k 17:9, 96 Fps At 5k, 120 Fps At 4k, 240 Fps At 2k | Redcode Hq/mq/lq/elq Raw; 4k Prores 4444 Xq To 60 Fps, Prores 422 Hq To 120 Fps | Up To 560 Mb/s To Cfexpress Type B | 12g-sdi Out, 9-pin Ext (genlock, Ltc, Gpio, Rs-232), 5-pin 00b Audio With +48 V, 3.5 Mm Headphone, Usb-c, Wi-fi 2.4/5 Ghz | 2.9 In 1440 X 1440 Touchscreen | Micro V-lock Battery Interface, 11-17 V 6-pin Dc In | Aluminium Alloy, 129 X 101 X 95 Mm, 2.62 Lb (1.19 Kg), Nikon Z9: Full-frame Fx-format Mirrorless Camera | 45.7 Mp Stacked Back-illuminated Cmos Sensor | Nikon Z Mount | Internal 8.3k 60p 12-bit N-raw And 8k 30p N-log Recording (firmware 2.0), 4k 120p | Dual Card Slots | En-el18 Series Battery (mh-33 Charger) | Supplied As Camera Body, Red V-raptor Xe (8k Vv) - Nikon Z Mount: Vistavision 8k Vv Global Shutter Cmos Cinema Camera | 35.4 Mp, 8192 X 4320 Px, 40.96 X 21.60 Mm (46.31 Mm Diagonal), 17+ Stops Dynamic Range | Integrated Locking Nikon Z Mount With Electronic Communication, /i Pl Support Via Red Pl Adapters | 60 Fps At 8k 17:9, 80 Fps At 6k, 120 Fps At 4k, 240 Fps At 2k | Redcode Hq/mq/lq/elq Raw; 2k/4k Prores 4444 Xq To 120 Fps; Prores Proxy Simultaneous | Up To 800 Mb/s To Cfexpress Type B | Dual 12g-sdi Out, 9-pin Ext, 5-pin 00b Audio With +48 V, Usb-c, Wi-fi 2.4/5 Ghz | Micro V-lock Interface, 11-17 V 6-pin Dc In | Aluminium Alloy, 150 X 116 X 108 Mm, 4.03 Lb (1.83 Kg), Red Dsmc3 Factory Accessories, Tilta Battery Plate For Red V-raptor Xe / Komodo-x (v-mount): Camera Battery Plate Converting The Red Komodo-x / V-raptor Integrated Micro V-lock Interface To Full-size V-mount | Accepts Standard V-mount Batteries For Larger Capacity And Improved Build Balance | Distribution Per Tilta: 2-pin Lemo Power Outputs, P-tap And Usb-c | Machined From Aluminium Alloy And Stainless Steel | Dimensions 6 X 4 X 3 In, Weight 1.5 Lb (0.68 Kg) | Mounts To The Camera Micro V-lock Plate | Colour Black, Red Dsmc3 Top Handle: Top-mounted Machined Camera Handle For Komodo, Komodo-x, V-raptor And V-raptor Xl Bodies | Ergonomic Bocote Hardwood Inlays | Integral Camera Run/stop Trigger Control | Built From Aluminium And Bocote Hardwood | Height 2.63 In (66.80 Mm), Width 2.36 In (60.00 Mm), Depth 4.50 In (114.20 Mm) | Weight Approx. 0.41 Lb (188.00 G) | Mounts To Camera With 2 X 1/4-20 Captive Mounting Screws | Supplied With Handle Trigger, Rear 3 In Piece, Front 1 In Piece And 15 Mm Monitor Mount, Red Dsmc3 Red Touch 7-inch Monitor: 7.0 In On-camera Lcd Monitor And Camera Control Surface For The Red Dsmc3 System (v-raptor, V-raptor Xl, Komodo-x) | 1920 X 1200 Panel, 322 Ppi, Peak Brightness 1300 Nits, 100% Dci-p3 Colour Gamut | Full Camera Control Via Smallhd Pageos Menu System With Waveform, Vectorscope, Histogram, False Colour, Colour Picker And Pixel Zoom | Removable Integrated Tilt Arm Rotating 180 Degrees | Powered And Fed Video Over Next-generation Pogo Pins Or A Single Locking Usb-c Style Dsmc3 Rmi Cable - No Separate Sdi Or Power Cable | Red Sku 730-0029-e, Red Z To Pl Adapter W/ Electronic Nd Filter (dsmc3): Shimmable Pl Mount Adapter With Integrated Electronic Nd For Red Z-mount Cameras (v-raptor [x] Z Mount, Komodo-x Z Mount) | Electronic Nd Filter Covers 2-7 Stops Of Light Loss With Precise 1/4, 1/3 Or Full-stop Increments; Clear Filter Supplied For When No Nd Is Required | Clear And Electronic Nd Filter Thicknesses Measured And Paired So No Back-focus Shift Occurs When Swapping | Titanium Core Construction, Resistant To Environmental Temperature Change For Consistent Back Focus | Supports Cooke /i Lens Metadata And Record Triggering | Nd Controlled From Adapter Buttons, Side Lcd, Dsmc3 Red Touch 7.0 In Lcd, Red Control, Red Control Pro, Web Interface Or Any Rcp2-compatible Remote | Supplied With Z To Pl Adapter, Electronic Nd And Clear Filter, Pl Mount Shim Pack And V-raptor Pl Support Brackets (set Of 2), Red Dsmc3 Touch 7.0" Lcd Mounting Bracket: All-metal Alternate Hinge And Updated Monitor Arm For The Dsmc3 Red Touch 7.0 In Lcd | Rigid Design Allows Greater Clamp Pressure On The Hinge So The Monitor Position Is Held Under Demanding Shooting Conditions | Aluminium Construction | Weight Approx. 0.13 Lb (58.97 G) | Mounts To Dsmc3 Red Touch 7.0 In Lcd | Operating Temperature 0 To 40 Deg C, Storage -20 To 50 Deg C | Includes All Hardware Required For Installation | Installation Does Not Affect The Dsmc3 Red Touch 7.0 In Warranty, Red Komodo Expander Module: Rear Expansion Module For Red Komodo And Komodo-x Adding Professional Video And Communication Connections | Provides Genlock (bnc), Gpi (bnc), Timecode In (bnc) And Ctrl (4-pin) Ports | Lightweight Machined Aluminium Alloy Construction With Multiple 1/4-20 And 3/8-16 Mounting Points And Arri-style Locating Holes | Integrated Quick-release Plate | Connects To The Camera Ext Port | Red Sku 720-0058 | Not Mechanically Compatible With The Komodo-x Bottom Screw Pattern - Mount In Another Position To Reach The Ext Port; Red Pro I/o Module Is The Dedicated Komodo-x Solution, Ignite Digi Red Accessories (ignitedigi.com.au), Ignite Digi Keystone Chopped Cage For V-raptor Xe (with Ears): Body Armour Cage For The Red V-raptor Xe, Chopped Profile Supplied With Removable Side Mounting Ears | Machined Construction Contoured To The V-raptor Xe Body | Provides 1/4-20 And 3/8-16 Accessory Threads With Arri-style Anti-twist Locating Holes Plus Cold-shoe Style Accessory Mounts | Preserves Access To Camera Controls, Media, Battery Plate And Ports | Supplied As A Set With Ears, Ignite Digi Ext Breakout Module: Breakout Cable For The Red 9-pin Ext Port, Providing Flying Leads To Genlock, Timecode, Gpio And Rs-232 Ctrl Connections | Terminated With A 9-pin Ext Connector At The Camera End | Shielded Cable Construction For Critical Timing Signals | Compatible With Red Komodo, Komodo-x And V-raptor Bodies | Length And Lead Terminations As Catalogued By Ignite Digi. Two 9 Pin Lemo Ext, One 3-pin Fischer Run / Stop. One 5-pin Lemo Time Code / Genlock., Ignite Digi Carbon Side Plate For Dji Transmission / Keystone: Carbon-fibre Side Plate Mounting A Dji Transmission Transmitter To An Ignite Digi Keystone Cage | Machined Carbon-fibre And Aluminium Construction For Low Weight | Provides Threaded Mounting For The Dji Transmission Video Receiver/transmitter And Antenna Clearance | Bolts To The Cage Side Using The Cage Mounting Pattern | Supplied As A Single Plate, Ignite Digi Camera Top Plate For Komodo X + V-raptor Xe: Top Plate For Red Komodo-x And V-raptor Xe Camera Bodies | Provides A Flat Accessory Surface With 1/4-20 And 3/8-16 Threaded Points And Arri-style Locating Holes | Machined Aluminium Construction With Camera-body Contoured Underside | Accepts Red And Third-party Top Handles, Monitor Mounts And Rod Brackets | Fastens To The Camera Top Using The Cameras Existing Top Mounting Points, Ignite Digi 80mm Rod Mount (red Standard): 80 Mm Rod Mount Using The Red Standard Rod Spacing | Clamps 15 Mm Lightweight Support Rods At Reds 80 Mm Centre Spacing | Machined Aluminium And Stainless-steel Clamp Construction With Locking Lever Or Screw | Provides Accessory Mounting Above Or Below The Rods | Compatible With Red Dsmc3 Camera Bodies And Standard 15 Mm Lws Accessories, Ignite Digi 80mm Lens Support: Lens Support For Long And Heavy Pl-mount Lenses, Set To The Red Standard 80 Mm Rod Spacing | Cradles The Lens Barrel At A Height Adjustable To The Optical Centre | Machined Aluminium Body With Padded Or Low-friction Lens Saddle | Secures To 15 Mm Lightweight Support Rods | Prevents Lens Mount Stress And Image Shift On Long Focal Lengths, Ignite Digi Quick Release Top Handle: Quick-release Camera Top Handle With An Integral Release Mechanism For Fast Removal Between Setups | Ergonomic Grip With Machined Aluminium Construction | Provides Accessory Threads For Monitor Mounts And Rod Brackets | Tool-free Release From The Camera Top Plate Or Cage | Compatible With Red Komodo-x And V-raptor Xe Builds Using Ignite Digi Top Plates, Ignite Digi 105mm Rod Mount For Cinetape / Rangefinder: Rod Mount Sized At 105 Mm For Mounting A Cinetape Or Other Rangefinder To 15 Mm Lightweight Support Rods | Machined Aluminium Clamp With A 105 Mm Spaced Mounting Face | Accepts Standard Rangefinder Bracket Hardware | Locks Onto 15 Mm Lws Rods | Maintains Rangefinder Alignment Relative To The Lens Axis, Ignite Digi Exo Plate For Red V-raptor Xe : Exo Mounting Plate For The Red V-raptor Xe | Machined Plate Providing A Rigid Accessory Interface For Camera Builds | Threaded Mounting Points With Arri-style Anti-twist Locating Holes | Preserves Access To The Camera Bottom And Rear Ports | Compatible With Standard Camera Support Hardware, Camera Accessories, Smallrig 5647 Cage Kit For Nikon Zr: Full Camera Cage Kit For The Nikon Zr, Smallrig Part 5647 | Aluminium-alloy Cage Contoured To The Zr Body With A Raised Front Lip To Stop Twisting | Provides 1/4-20 And 3/8-16 Accessory Threads With Arri-style Anti-twist Locating Holes, Cold Shoe And Nato-compatible Mounting | Retains Access To Battery, Memory Card, Lens Release, Ports And Controls | Kit Supplied With The Accessories Smallrig Catalogues Under Part 5647 For The Nikon Zr, Tilta Power Supply Base Plate For Dji Ronin Rs4 Pro: Power Supply Base Plate, Tilta Sku Tga-pbp | Cartridge-design Base Plate Port Compatible With Dji Ronin Gimbals | Supplies Power To The Gimbal And Accessories From The Base Plate Cartridge | Compatible With The Tilta Float System | Aluminium Alloy And Stainless Steel Construction | Dimensions 5 X 4.5 X 2.5 In, Weight 0.384 Lb (0.17 Kg) | Colour Black | Adaptable To Dji Rs3, Rs4 And Rs5 With The Optional Tilta Security Bracket | Mounts To Tripods, Sliders, Jibs, Car Mounts And Stabilisation Systems Via 1/4-20 And 3/8-16 Threads On The Base, Smallrig Cage For Nikon Z9: Full Camera Cage For The Nikon Z 9, Smallrig Part 3195 | Aluminium-alloy Cage With A Locked Anti-twist Design Securing The Camera At Multiple Points | Provides 1/4-20 And 3/8-16 Accessory Threads, Arri-style Locating Holes, Cold Shoe And Nato Rail | Retains Access To Battery Door, Card Slots, Ports And Controls | Compatible With Smallrig Top Handles, Rod Clamps And Monitor Mounts, Smallrig Top Handle For Nikon Z9 Cage: Top Handle For The Smallrig Nikon Z 9 Cage Assembly | Machined Aluminium Construction With A Full-length Anti-slip Grip Surface | Provides Multiple 1/4-20 And 3/8-16 Accessory Threads And A Cold Shoe | Mounts To The Cage Top Via The Cage Nato Rail Or Threaded Points | Retains Access To The Camera Top Controls, Smallrig Hdmi + Usb-c Cable Clamp For Nikon Z9 Cage: Cable Clamp Set Securing Hdmi And Usb-c Cables At The Nikon Z 9 Cage | Two-piece Machined Clamp With A Rubber-padded Cable Channel Protecting Connectors From Strain | Fastens To The Cage With Captive Screws | Prevents Connector Pull-out During Gimbal And Handheld Moves | Supplied As A Set, Spare Sachtler/supertech 100mm Bowl Plate (touch & Go): Spare Touch-and-go Camera Plate For 100 Mm Bowl Fluid Heads | Sliding Plate With The Standard Touch-and-go Wedge Profile For Fast Camera Mounting | 1/4-20 And 3/8-16 Camera Screws With A Locating Pin | Locking Mechanism Engages The Head Platform For Secure Clamping | Machined Metal Construction | Diameter/thread Set As Required By Sachtler And Supertech 100 Mm Head Platforms, Spare E-image 75mm Bowl Plate: Spare Camera Plate For E-image 75 Mm Bowl Fluid Heads | Quick-release Sliding Plate With 1/4-20 And 3/8-16 Camera Screws And Anti-twist Locating Pin | Locks Into The Head Platform For Touch-and-go Mounting | Machined Aluminium Construction | Matched To The E-image 75 Mm Head Platform, Spare Manfrotto 501pl Camera Plate: Spare Quick-release Camera Plate, Manfrotto 501pl | Sliding Plate Compatible With Manfrotto 501, 501hdv, 504, 701hdv And Equivalent Heads Using The 501pl Platform | Supplied With 1/4-20 And 3/8-16 Camera Screws And A Video Camera Locating Pin | Machined Aluminium Construction With A Non-slip Camera Pad | Locks Into The Head Platform For Touch-and-go Mounting, Batteries & Power, V-mount Battery 290wh (bebob/idx/fxlion): V-mount (v-lock) Lithium-ion Camera Battery, 290 Wh Class Capacity | Nominal 14.4 V V-mount Interface With D-tap And Usb Power Outputs And A 4-led Or Lcd State-of-charge Indicator | Integrated Battery Management Electronics With Over-current, Over-discharge And Temperature Protection | Compatible With V-mount Battery Plates And Chargers Including The Tilta Plate Used On The Red Bodies | Acceptable Makes: Bebob, Idx Or Fxlion (or Equivalent Approved), V-mount Dual Battery Charger: Two-channel Simultaneous V-mount Lithium-ion Battery Charger | Charges Two V-mount Batteries At Once With Independent Charge Channels | Automatic Charge Termination With Led Per-channel Status Indication | Mains Powered | Compatible With Standard V-mount Batteries Including The 290 Wh Packs In This List | Acceptable Makes: Bebob, Idx Or Fxlion (or Equivalent Approved), Micro-v 98wh Battery: Micro V-lock Lithium-ion Camera Battery, 98 Wh Class Capacity | Micro V-mount Interface Matching The Red Komodo-x And V-raptor Integrated Micro V-lock Battery Plate | Nominal 14.4 V Class Output With Charge-state Indication | Air-travel Compliant 98 Wh Rating | Acceptable Makes: Bebob, Idx Or Fxlion (or Equivalent Approved), Micro V-lock Dual Charger: Two-channel Micro V-lock Lithium-ion Battery Charger | Charges Two Micro V-mount Batteries Simultaneously | Independent Charge Channels With Per-channel Led Status | Automatic Charge Termination And Cell Balancing | Mains Powered | Compatible With The Micro-v 98 Wh Packs In This List | Acceptable Makes: Bebob, Idx Or Fxlion (or Equivalent Approved), Nikon En-el15c Battery (zr Only): Nikon Genuine Rechargeable Lithium-ion Battery, Type En-el15c | For Nikon Zr And Other Nikon Z-series Bodies Taking The En-el15 Series | Charges In The Nikon Mh-34 Charger And In-camera Over Usb-c Power Delivery On Supported Bodies | Nikon Original Accessory With Full Nikon India Warranty | Supplied Individually, Nikon En-el18d Battery (z9 Only): Nikon Genuine High-capacity Rechargeable Lithium-ion Battery, Type En-el18d | For Nikon Z 9 And Other Nikon Bodies That Take The En-el18 Series | Charges In The Nikon Mh-33 Charger | Nikon Original Accessory With Full Nikon India Warranty | Supplied Individually, Nikon Mh-34 Battery Charger: Nikon Mh-34 Genuine Battery Charger For En-el15 Series Lithium-ion Batteries, En-el15c And En-el15b | Compact Single-bay Charger Used With The Nikon Eh-7p Charging Ac Adapter | Led Charge Status Indication | Charges One Battery At A Time | Nikon Original Accessory Supplied Individually | 1-year Manufacturer Warranty, Nikon Mh-33 Battery Charger: Nikon Mh-33 Genuine Battery Charger For En-el18 Series Lithium-ion Batteries, En-el18d, En-el18c And En-el18b | Single-bay Charger Serving The Nikon Z9 And D6 Battery System | Led Charge Status Indication | Charges One Battery At A Time | Nikon Original Accessory Supplied Individually | 1-year Manufacturer Warranty, Dji Wb37 Intelligent Battery (dji High Bright Monitor): Dji Wb37 Intelligent Lithium-ion Battery | For The Dji High-bright Remote Monitor And Other Dji Wb37-compatible Devices | Integrated Dji Intelligent Battery Management With Charge-state Indication | Charges In The Dji Wb37 Battery Charging Hub | Compact Pack With A Dji Slide-in Battery Interface | Supplied Individually, Dji Wb37 Battery Charging Hub (dual Usb-c Accepted): Dji Wb37 Battery Charging Hub | Charges Dji Wb37 Intelligent Batteries | Usb-c Charging Input As Accepted By The Current Dji Hub | Led Charge-status Indication Per Battery Slot | Compact Tabletop Unit | Compatible With Dji Wb37 Packs Used In The High-bright Remote Monitor, Storage, Red Pro Cfexpress 4.0 Type B 1tb : Cfexpress V4 Type B Media Card, 1 Tb, Red Pro Series, Sku 750-0103, Developed With Angelbird | 1024.21 Gb (953.87 Gib) Usable Capacity | Certified For Red V-raptor (8k Up To 800 Mb/s) And Komodo-x (6k Up To 560 Mb/s) | Dimensions Approx. 38.5 X 29.6 X 3.8 Mm, Weight Approx. 7.0 G | Operating Temperature -10 To 70 Deg C, Storage -20 To 85 Deg C | Operating Humidity 5 To 95 Percent Non-condensing | Shock Resistance 50 G At 10-2000 Hz, Vibration Resistance 15 G | Requires Red Firmware 2.0.4 Beta Or Later | 3-year Limited Warranty Via Angelbird Including Free Data Recovery, Red Pro Cfexpress 4.0 Type B 2tb : Cfexpress V4 Type B Media Card, 2 Tb, Red Pro Series, Developed With Angelbird | 2048.41 Gb (1907.73 Gib) Usable Capacity | Certified For Red V-raptor (8k Up To 800 Mb/s) And Komodo-x (6k Up To 560 Mb/s) | Dimensions Approx. 38.5 X 29.6 X 3.8 Mm, Weight Approx. 7.0 G | Operating Temperature -10 To 70 Deg C, Storage -20 To 85 Deg C | Operating Humidity 5 To 95 Percent Non-condensing | Shock Resistance 50 G At 10-2000 Hz, Vibration Resistance 15 G | Requires Red Firmware 2.0.4 Beta Or Later | 3-year Limited Warranty Via Angelbird Including Free Data Recovery, Red Pro Cfexpress V4 Type B Reader: Cfexpress V4 Type B Card Reader, Sku 750-0105 | Reads Red Pro Cfexpress V4 Type B 1 Tb And 2 Tb Cards At Up To 40 Gb/s Over A Usb4 Host Port | Real-world Offload Times Per Red: 1 Tb V4 In Approx. 6 Minutes Over Usb4, Approx. 10 Minutes Over Usb 3.2; 2 Tb V4 In Approx. 11 Minutes Over Usb4, Approx. 20 Minutes Over Usb 3.2 | Usb4 Connection Required For Maximum Throughput; Performance Varies With Temperature, Host Bus Speed And Destination Drive Write Speed | 3-year Limited Warranty Supported By Angelbird Technologies Gmbh, Activation Within 30 Days Of Purchase, Cinema Spherical Lens Series, Dzofilm Arles Prime Cine Lens Set (pl Mount) - With Original Factory Hard Case: Dzofilm Arles Prime Cine Lens Series, Pl Mount | Full-frame / Vistavision Coverage With A 46.5 Mm Image Circle | T1.4 Maximum Aperture For The 21, 25, 35, 40, 50, 75 And 100 Mm Focals; 14 Mm Is T1.9, 135 Mm Is T1.8 And 180 Mm Is T2.4 | Series Now 11 Lenses: 14, 18, 21, 25, 35, 40, 50, 75, 100, 135 And 180 Mm (18 Mm T1.4 Added November 2025) | Front Diameter 95 Mm, Filter Thread 86 Mm | Original Factory Packaging: Set A 25/35/50/75/100 Mm, Set B 14/21/40/135/180 Mm | Supplied In The Original Factory Hard Case, Cinema Anamorphic Lens Series, Dzofilm Arcana 1.5x Anamorphic Cine Lens Set (32, 45, 75mm) T2.1 - With Original Factory Hard Case: Dzofilm Arcana 1.5x Anamorphic Prime Cine Lens Set Comprising 32 Mm, 45 Mm And 75 Mm | Pl Mount With Multi-point Positioning And Vertical-shoot Repositioning | T2.1 Maximum Aperture, T2.1-t16 Range | Full-frame / Vistavision Hybrid Anamorphic Coverage, 43.3 Mm Image Circle, 1.5x Squeeze Factor | Weight Approximately 700 G Each | Front Diameter 80 Mm, Filter Thread M77 | Original Factory Hard Case Included, Nikkor Z-mount Prime Lenses (native Z Mount), Nikkor Z 50mm F/1.2 S: Nikkor Z 50mm F/1.2 S Fast Prime Lens | Nikon Z Mount (full-frame Fx Format) | Maximum Aperture F/1.2, Part Of Nikons S-line Premium Optics | Nano Crystal Coat To Suppress Ghosting And Flare | Multi-focus System With Dual Stm Drive For Fast, Quiet Autofocus | Electromagnetic Diaphragm For Stable Exposure Control During High-speed Continuous Shooting | Filter Thread 82 Mm | Weather-sealed Construction, Nikkor Z 35mm F/1.2 S: Nikkor Z 35mm F/1.2 S Fast Wide Prime Lens | Nikon Z Mount (full-frame Fx Format) | Maximum Aperture F/1.2, S-line Premium Optics | Nano Crystal Coat To Suppress Ghosting And Flare | Multi-focus System With Dual Stm Drive For Fast, Quiet Autofocus | Electromagnetic Diaphragm For Consistent Exposure During High-speed Burst Shooting | Filter Thread 82 Mm | Weather-sealed Construction, Nikkor Z 85mm F/1.2 S: Nikkor Z 85mm F/1.2 S Fast Portrait Prime Lens | Nikon Z Mount (full-frame Fx Format) | Maximum Aperture F/1.2, S-line Premium Optics | Nano Crystal Coat To Suppress Ghosting And Flare | Multi-focus System With Dual Stm Drive For Fast, Quiet Autofocus | Electromagnetic Diaphragm For Consistent Exposure During High-speed Burst Shooting | Filter Thread 82 Mm | Weather-sealed Construction, Nikkor Z Mc 105mm F/2.8 Vr S (macro): Nikkor Z Mc 105mm F/2.8 Vr S Medium-telephoto Macro Lens | Nikon Z Mount (full-frame Fx Format) | Maximum Aperture F/2.8, S-line Premium Optics | 1:1 Maximum Reproduction Ratio | Vibration Reduction (vr) Optical Stabilisation | Nano Crystal Coat And Arneo Coat To Suppress Ghosting And Flare | Multi-focus System For Fast, Quiet Autofocus | Filter Thread 62 Mm | Weather-sealed Construction, Nikkor Z-mount Zoom Lenses (native Z Mount), Nikkor Z 14-24mm F/2.8 S (wide Zoom): Nikkor Z 14-24mm F/2.8 S Ultra-wide Zoom Lens | Nikon Z Mount (full-frame Fx Format) | Constant Maximum Aperture F/2.8 Across The Zoom Range, S-line Premium Optics | Nano Crystal Coat And Arneo Coat To Suppress Ghosting And Flare | Stepping Motor Autofocus, Weather-sealed Construction | Front Filter Thread 112 Mm Via The Supplied Hb-97 Lens Hood; Rear Gelatine Filter Slot On The Barrel | For Use With The 112 Mm Matte Box Adapter Ring Specified In This List, Nikkor Z 24-70mm F/2.8 S (standard Zoom): Nikkor Z 24-70mm F/2.8 S Standard Zoom Lens | Nikon Z Mount (full-frame Fx Format) | Constant Maximum Aperture F/2.8 Across The Zoom Range, S-line Premium Optics | Nano Crystal Coat And Arneo Coat To Suppress Ghosting And Flare | Stepping Motor Autofocus With A Manual Focus Ring And An Oled Information Display | Filter Thread 77 Mm | Weather-sealed Construction | Note: A Mark Ii Nikkor Z 24-70mm F/2.8 S Ii Is Also Catalogued With An 82 Mm Thread, Nikkor Z 70-200mm F/2.8 Vr S (telephoto Zoom) : Nikkor Z 70-200mm F/2.8 Vr S Telephoto Zoom Lens | Nikon Z Mount (full-frame Fx Format) | Constant Maximum Aperture F/2.8, S-line Premium Optics | Vibration Reduction (vr) Optical Stabilisation | Nano Crystal Coat And Arneo Coat To Suppress Ghosting And Flare | Stepping Motor Autofocus With An Oled Information Display | Tripod Collar And Weather-sealed Construction | Filter Thread 77 Mm | Note: A Mark Ii Nikkor Z 70-200mm F/2.8 Vr S Ii Is Also Catalogued With A 77 Mm Thread, Nikkor Z 180-600mm F/5.6-6.3 Vr (super-tele Zoom): Nikkor Z 180-600mm F/5.6-6.3 Vr Super-telephoto Zoom Lens | Nikon Z Mount (full-frame Fx Format) | Variable Maximum Aperture F/5.6 To F/6.3 Across The Zoom Range | Vibration Reduction (vr) Optical Stabilisation | Stepping Motor Autofocus | Removable Tripod Collar With Foot With 1/4 Inch And 3/8 Inch Threads | Filter Thread 95 Mm, Pitch 1.0 Mm | Non-s Nikkor Z Lens As Named In This List | Weather-resistant Construction, Matte Boxes - Multi-system, Tilta Mirage Pro Matte Box (base Kit): Clamp-on Matte Box, Tilta Mirage Pro Base Kit, Part Mb-t17 | Clamp-on Adapters For 95 Mm, 110 Mm, 114 Mm And 136 Mm Lens Front Diameters, Plus 82/77/72/67 Mm Adapter Rings For Photo Lenses | Accommodates Three 4 X 5.65 In Rectangular Filters, Each Tray With Its Own Independent Tie-down Security Screw | Removable Four-sided Carbon-fibre Flags; Top Flag Includes 55 Degree Side Extensions | Anti-glare Coating On The Top Flag And Matte Box Interior | Quick-release Magnetic Clip-on Hood, 1/4-20 Threads With Locating Points | 15 Mm Lws Rod Mounting Bracket | Materials Carbon Fibre, Aluminium Alloy, Stainless Steel; Base Kit Weight 7.7 Lb (3.49 Kg), Pack Dimensions 19 X 15.4 X 6.3 In, Bright Tangerine Misfit Kick Mk Ii Matte Box (clip-on Build): Modular Matte Box, Bright Tangerine Misfit Kick Mk Ii | Configurable As A Clip-on Build Using Frame Safe Clamp-on Adapters, Or Mounted On Support Rods, Or On A Swing-away Dovetail | Patented Reveal Stage Mechanism Adds A Third Filter Stage With No Tools | Spring-loaded Filter Tray System Protects Filters As They Are Inserted And Removed | Top, Side And Bottom Flags Available For Additional Glare Control | Core Body Weight 198 G (2-stage Configuration Per Bright Tangerine Dealer Specification) | Accepts 4 X 5.65 In Filters | Full Range Of Clamp-on And Swing-away Mounting Accessories Available, Tilta Mini Matte Box (carbon Fiber, 140g) - Nikon Z Bodies: Compact Clamp-on Matte Box For Dslr And Mirrorless Bodies, Tilta Part Mb-t15 | Weighs 140 G (4.9 Oz), Making It Suitable For Gimbal Use | Front Slot Takes One 4 X 5.65 In Rectangular Filter Plus An Inner Stackable Circular Filter Slot | Clamps Directly To Lenses 85 Mm Or Smaller Using The Included Filter-thread Adapter Rings | Kit Includes Four Lens Adapter Rings - 82 Mm, 77 Mm, 72 Mm And 67 Mm | Adjustable Carbon-fibre French Flag With 180 Degrees Of Coverage | Included 15 Mm Single Rod Support Attachment And 15 X 100 Mm Aluminium Rod Provide Lens Support | Materials Aluminium Alloy, Stainless Steel, Carbon Fibre; Colour Black | Tilta Recommends Focal Lengths Above 24 Mm On S35 And 35 Mm On Full Frame To Avoid Vignetting, Matte Box Accessories (donuts, Flags, Trays), Additional Donut Adapter Ring - 87mm (dzofilm Arcana). Bright Tangerine Threaded Donut Rings / Clamp Adapters: Flexible Donut Adapter Ring, 87 Mm Inner Diameter | Bridges The Gap Between A 114 Mm Arri-standard Matte Box And A Smaller Lens Front | Machined Anodised Aluminium Construction With A Soft Rubber Donut That Seals Against The Lens Barrel | Minimises Overhang So The Matte Box Retains Maximum Field Of View | Mounts Into The Matte Box Rear Opening And Grips The Lens Outer Diameter | Intended For The Dzofilm Arcana Anamorphic Primes In This List, Additional Donut Adapter Ring - 95mm (dzofilm Arles Set). Bright Tangerine Threaded Donut Rings / Clamp Adapters: Donut Adapter Ring, 95 Mm Lens Outer Diameter | Designed For Use With Arri Lmb Standard Matte Boxes Including The Bright Tangerine Misfit Atom, Misfit Kick And Misfit Six | Made From Precision-cut Anodised Aluminium, Securing The Matte Box To The Lens Without Overhang | For Lenses With A 95 Mm Outer Diameter, Matching The Dzofilm Arles Primes Used In This List | Fits The 114 Mm Matte Box Rear Opening, Additional Donut Adapter Ring - 62mm (nikkor Z Mc 105). Bright Tangerine Threaded Donut Rings / Clamp Adapters:donut Adapter Ring, 62 Mm Lens Diameter | Steps A Smaller-diameter Lens Up To A 114 Mm Arri Lmb Standard Matte Box Aperture | Precision-cut Anodised Aluminium Construction For A Secure, Non-marking Grip | Maintains Maximum Field Of View By Minimising Matte Box Overhang | Matched To The 62 Mm Filter Thread Of The Nikkor Z Mc 105mm F/2.8 Vr S Macro Lens In This List, Additional Donut Adapter Ring - 77mm (nikkor Z 70-200). Bright Tangerine Threaded Donut Rings / Clamp Adapters:donut Adapter Ring, 77 Mm Lens Diameter | Steps The Lens Up To A 114 Mm Arri Lmb Standard Matte Box Including Bright Tangerine Misfit Atom, Misfit Kick And Misfit Six | Precision-cut Anodised Aluminium Construction, Lightweight And Durable | Minimises Overhang To Preserve Field Of View | Matched To The 77 Mm Filter Thread Of The Nikkor Z 70-200mm F/2.8 Vr S In This List., Additional Donut Adapter Ring - 82mm (nikkor Z 35/50/85/24-70). Bright Tangerine Threaded Donut Rings / Clamp Adapters: Donut Adapter Ring, 82 Mm Lens Diameter | Steps The Lens Up To A 114 Mm Arri Lmb Standard Matte Box Including Bright Tangerine Misfit Atom, Misfit Kick And Misfit Six | Precision-cut Anodised Aluminium Construction With A Secure Clamp To Both Matte Box And Lens | Minimises Overhang To Preserve Field Of View | Matched To The 82 Mm Filter Thread Shared By The Nikkor Z 35mm F/1.2 S, 50mm F/1.2 S, 85mm F/1.2 S And 24-70mm F/2.8 S In This List, Additional Donut Adapter Ring - 95mm (nikkor Z 180-600). Bright Tangerine Threaded Donut Rings / Clamp Adapters: Donut Adapter Ring, 95 Mm Lens Diameter | Steps The Lens Up To A 114 Mm Arri Lmb Standard Matte Box Including Bright Tangerine Misfit Atom, Misfit Kick And Misfit Six | Precision-cut Anodised Aluminium Construction, Lightweight And Durable | Minimises Overhang To Preserve Field Of View | Matched To The 95 Mm Filter Thread (1.0 Mm Pitch) Of The Nikkor Z 180-600mm F/5.6-6.3 Vr In This List, Additional Donut Adapter Ring - 112mm (nikkor Z 14-24). Bright Tangerine Threaded Donut Rings / Clamp Adapters: Donut Adapter Ring, 112 Mm Lens Diameter | Steps The Lens Up To A 114 Mm Arri Lmb Standard Matte Box Aperture | Precision-cut Anodised Aluminium Construction With A Secure Clamp To The Matte Box | Minimises Overhang To Preserve Field Of View | Matched To The 112 Mm Front Diameter Of The Nikkor Z 14-24mm F/2.8 S When Fitted With Its Hb-97 Filter Hood In This List, Tilta Mirage Pro - Side Flag Set : Side Flag Set For The Tilta Mirage Pro Matte Box | Removable Four-sided Carbon-fibre Flag Design Matching The Matte Boxs Top Flag Construction | Extends Light Control Beyond The Top Flags Frame To Cut Side Glare And Flare | Attaches To The Matte Box Body Using The 1/4-20 Threads With Locating Points | Anti-glare Treated To Absorb Excess Light Through Diffused Reflection | Supplied As A Set, Bt Misfit Kick Mk Ii - Side Flag Set : Side Flag Set For The Bright Tangerine Misfit Kick Mk Ii Matte Box | Fine-tunes The Frame By Reducing Glare From Light Sources At The Sides Of Frame | Mounts To The Matte Box Body Using The Standard Flag Mounting Points | Lightweight Construction To Avoid Loading The Matte Box Front | Supplied As A Set | Compatible With The Misfit Kick / Misfit Kick Mk Ii Matte Box Body, 4x5.65" Spare Filter Tray (universal). Bright Tangerine 4x5.65 Filter Tray For Misfit Kick Mk-ii : Spare 4 X 5.65 In Rectangular Filter Tray | Spring-loaded Or Tie-down Retention To Hold The Filter Securely While Slotting In And Out | Compatible With 4 X 5.65 In Matte Boxes Including The Tilta Mirage Pro (mb-t17-ft) And Bright Tangerine Misfit Kick | Machined Aluminium Construction | Anti-scratch Design To Protect Filter Surfaces | Supplied Individually, 4x5.65" Rotating Filter Tray (for Polarizer). Bright Tangerine One Tray For Misfit Kick Mk-ii : Rotating 4 X 5.65 In Filter Tray For Circular Polariser Filters | Rotating Stage Allows The Polariser To Be Dialled In Without Removing The Tray | Compatible With 4 X 5.65 In Matte Boxes | Machined Aluminium Construction With A Secure Tie-down Screw | Filter Retained During Rotation | Supplied Individually, Tilta Mini Matte Box - Spare Carbon Top Flag : Spare Carbon-fibre Top Flag For The Tilta Mini Matte Box Mb-t15 | French Flag Design With 180 Degrees Of Coverage For Flare Control | Adjustable Tilt To Cut Down Lens Flare As Framing Changes | Carbon-fibre Construction To Keep The Matte Box Light | Mounts To The Mini Matte Box Body Front | Supplied Individually, Tilta Mirage Pro - 15mm Lws Rod Adapter Kit : 15 Mm Lws Rod Adapter Kit For The Tilta Mirage Pro Matte Box | Mounts The Mirage Pro To Dual 15 Mm Lightweight Support Rods When Not Using A Clamp-on Configuration | Machined Aluminium Alloy And Stainless-steel Construction | Provides Rod-supported Stability For Heavier Lens And Filter Configurations | Part Number Mb-t17-mb-l15 (15 Mm Lws Mounting Bracket) | Works Alongside The Optional Swing-away Adapter For Fast Lens Changes, Bt Misfit Kick Mk Ii - Swing-away Bracket: Swing-away Bracket For The Bright Tangerine Misfit Kick Mk Ii Matte Box | Attaches The Matte Box To A Swing-away Dovetail So The Matte Box Can Be Swung Clear Of The Lens For Fast Prime Changes | Rod-mounted Swing-away Configuration | Machined Aluminium Construction | Compatible With The Misfit Kick / Misfit Kick Mk Ii Body And Bright Tangerine Swing-away Dovetail Components, Tilta 62mm Adapter Ring For Tilta Mirage (for Nikkor Z Mc 105mm Macro) : Adapter Ring, 62 Mm, For The Tilta Mirage Matte Box | Screws Into The Front Filter Thread Of A Photo Lens And Lets The Mirage Matte Box Clamp Directly Onto The Ring | 95 Mm Outer Diameter Standardises Differently Sized Lenses Onto The Same Matte Box | Features Front Filter Threads So Circular Screw-on Filters Can Be Used (note: The 95 Mm Version Has No Front Threads) | Machined Aluminium Alloy, Colour Black | Part Of The Mirage Adapter Ring Range Covering Filter Threads From 52 Mm To 95 Mm | For The Nikkor Z Mc 105mm F/2.8 Vr S Macro Lens In This List, 4x5.65" Filters - Irnd, Nisi 4x5.65" Cine Nano Irnd 0.6 (2 Stops): Nisi 4 X 5.65 In Cine Nano Irnd Neutral Density Filter, 0.6 Density Equalling 2 Stops Of Light Loss | Infra-red Cut Coating To Prevent Ir Pollution And Colour Shift On Digital Sensors | Nano Multi-layer Coating For Reduced Reflection And Easy Cleaning | High-definition Optical Glass With A Precision-ground Flat Surface | 4 X 5.65 In Rectangular Cinema Format For Standard Matte Box Filter Trays | Supplied Individually, Nisi 4x5.65" Cine Nano Irnd 0.9 (3 Stops) : Nisi 4 X 5.65 In Cine Nano Irnd Neutral Density Filter, 0.9 Density Equalling 3 Stops Of Light Loss | Infra-red Cut Coating To Prevent Ir Pollution And Colour Shift On Digital Sensors | Nano Multi-layer Coating For Reduced Reflection And Easy Cleaning | High-definition Optical Glass With A Precision-ground Flat Surface | 4 X 5.65 In Rectangular Cinema Format For Standard Matte Box Filter Trays | Supplied Individually, Nisi 4x5.65" Cine Nano Irnd 1.2 (4 Stops) : Nisi Cinema Nano Irnd 1.2 Neutral Density Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | 1.2 Density Giving A 4 Stop Exposure Reduction, 16x Filter Factor | Ir Cut Coating Blocks Infrared Contamination So Blacks And Skin Tones Stay Neutral On Digital Sensors Under Heavy Nd | Nano Multi-coating Stack: Ir Cut, Nd, Waterproof, Oil Resistant And Scratch Resistant Layers On Both Faces | Optical Glass With A Hydrophobic Surface That Repels Water And Makes Cleaning Simple | 4 Mm Thick Laminated H-k9l Optical Glass, Hardened With Resin Edge Sealing, Polished To Cinema Flatness | Fits 4 X 5.65 In Matte Box Filter Trays, Including Rotating Trays | Supplied With A Synthetic Leather Case | Supplied In A Protective Pouch, Nisi 4x5.65" Cine Nano Irnd 1.5 (5 Stops) : Nisi Cinema Nano Irnd 1.5 Neutral Density Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | 1.5 Density Giving A 5 Stop Exposure Reduction, 32x Filter Factor | Ir Cut Layer Suppresses Infrared Pollution That Would Otherwise Shift Blacks And Foliage Toward Magenta At High Nd | Nano Multi-coating On Both Faces For Ir Cut, Water And Oil Repellency, And Scratch Resistance | Optical Glass With A Hydrophobic Surface | Fits 4 X 5.65 In Matte Box Trays | Supplied In A Protective Pouch, Nisi 4x5.65" Cine Nano Irnd 0.3 (1 Stop) : Nisi Cinema Nano Irnd 0.3 Neutral Density Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | 0.3 Density Giving A 1 Stop Exposure Reduction, 2x Filter Factor | Ir Cut Coating Keeps Colour Neutral Under Digital Sensors When Nd Is Used In Bright Conditions | Nano Multi-coating With Waterproof, Oil Resistant And Scratch Resistant Layers On Both Faces | Optical Glass With A Hydrophobic Surface | Fits 4 X 5.65 In Matte Box Filter Trays | Supplied In A Protective Pouch, 4x5.65" Filters - Diffusion, Tiffen 4x5.65" Black Pro-mist 1/4 Filter:tiffen Black Pro-mist 1/4 Diffusion Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | Combines The Highlight Halation Of Pro-mist With A Subtle Black Speck Component That Lowers The Overall Flare And Veiling Glare | Softens Skin Texture And Highlights While Keeping Blacks And Contrast Under Control | Density 1/4 | Colorcore Bonded Construction With The Filter Effect Laminated Between Two Layers Of Optical Glass For Durability And Flatness | Fits 4 X 5.65 In Matte Box Trays | Tiffen Publishes A 10-year Warranty On Its Filters, Tiffen 4x5.65" Glimmerglass 1 Filter : Tiffen Glimmerglass 1 Diffusion Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | Produces A Soft, Clean Glow Around Highlights Without The Milkiness Of A Standard Diffusion, While Holding Contrast And Detail In The Mid Tones | Density 1 | Adds A Subtle Sparkle To Point Sources Such As Practical Lamps And Specular Highlights | Colorcore Bonded Construction Between Two Layers Of Optical Glass For Flatness And Durability | Fits 4 X 5.65 In Matte Box Trays | Tiffen Publishes A 10-year Warranty On Its Filters, Schneider 4x5.65" Hollywood Black Magic 1/4 Filter : Schneider Hollywood Black Magic 1/4 Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | Blends Black Frost Diffusion With Classic Soft To Soften Contrast And Roll Off Highlights While Retaining Shadow Density | Density 1/4 Gives A Gentle Diffusion For Close Ups And Skin, With A Controlled Halation Rather Than A Softening Veil | Laminated Construction Between Optical Glass Elements For Stability | Colour Neutral, So No Exposure Or White Balance Compensation Is Needed Beyond The Diffusion Itself | Fits 4 X 5.65 In Matte Box Trays | 1-year Manufacturer Warranty, Tiffen 4x5.65" Black Diffusion/fx 1 Filter : Tiffen Black Diffusion/fx 1 Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | Diffusion That Spreads Highlight Detail Into A Controlled Glow While Suppressing The Veiling Flare Typical Of Standard Diffusion | Density 1, Giving Softening Of Skin And Highlights With Blacks Kept Dense | Colour Neutral Performance With No Significant Exposure Shift | Colorcore Bonded Construction Laminated Between Optical Glass For Flatness | Fits 4 X 5.65 In Matte Box Trays | Tiffen Publishes A 10-year Warranty On Its Filters, 4x5.65" Filters - Circular Polarizer, Nisi 4x5.65" True Color Cpl (for Rotating Tray) : Nisi Cinema True Color Circular Polarising Filter, 4 X 5.65 In (101.6 X 143.5 Mm) | True Color Multilayer Coating Avoids The Yellow Or Warm Cast Common To Other Polarisers, Holding A Neutral Colour Balance | Standard Cpl Strength With No Cpl+nd Combination, Intended For A Rotating Matte Box Tray | Dual-sided Nano Coatings Give Waterproof, Oil Resistant And Scratch Resistant Surfaces | Optical Glass, Edge Sealed And Ground To Sit Flat In The Tray | Delivers Deepened Skies, Controlled Reflections And Improved Saturation On Foliage And Water, Variable Nd (round Screw-on) - Z-mount Nikkor Lenses, Nisi True Color Nd-vario Pro Nano 62mm : Nisi True Color Nd-vario Pro Nano Variable Neutral Density Filter, 62 Mm Thread | Variable Range 1 To 5 Stops (nd2 To Nd32), Adjusted By Rotating The Front Ring | True Color Coating Holds A Neutral Balance Across The Range Without The Colour Shift Typical Of Variable Nd | Nano Multi-coating Layers For Waterproof, Oil Resistant And Scratch Resistant Surfaces, Edge Sealed | Brass Or Aluminium Frame With A Knurled Rotation Ring And A Threaded Front For Stacking | Designed For Both Photography And Cine Use On Lenses With A 62 Mm Front Thread, Nisi True Color Nd-vario Pro Nano 77mm : Nisi True Color Nd-vario Pro Nano Variable Neutral Density Filter, 77 Mm Thread | Variable Range 1 To 5 Stops (nd2 To Nd32) Adjusted By Rotating The Ring | True Color Multi-coating Keeps Colour Neutral Through The Range | Nano Coating Layers: Waterproof, Oil Resistant And Scratch Resistant, With Sealed Edges | Frame With Knurled Rotation Ring And Front Thread For Stacking | Suits Cine And Photography Lenses With A 77 Mm Front Thread, Nisi True Color Nd-vario Pro Nano 82mm : Nisi True Color Nd-vario Pro Nano Variable Neutral Density Filter, 82 Mm Thread | Variable 1 To 5 Stop Range (nd2 To Nd32) Set By Rotating The Front Ring | True Color Coating Avoids The Warm Cast Of Conventional Variable Nd Filters | Nano Multi-coating With Waterproof, Oil Resistant And Scratch Resistant Performance, Edges Sealed | Knurled Rotation Ring With A Threaded Front Face For Stacking | For Lenses With An 82 Mm Front Thread, Nisi True Color Nd-vario Pro Nano 95mm : Nisi True Color Nd-vario Pro Nano Variable Neutral Density Filter, 95 Mm Thread | Variable 1 To 5 Stop Range (nd2 To Nd32) Adjusted By Rotating The Ring | True Color Coating Maintains Neutral Colour Across The Range | Nano Coating Stack: Waterproof, Oil Resistant, Scratch Resistant, With Sealed Edges | Knurled Rotation Ring And Front Thread For Stacking | Sized For Large Cine And Photography Lenses With A 95 Mm Front Thread, Lens Cases + Gear Rings + Test Charts, Portabrace Pb-24lens46p - Padded Hard Lens Case (individual For Pl Cinema Lenses) : Padded Hard Case For An Individual Pl Mount Cinema Lens | Rigid Outer Shell With A Moulded Base, A Padded Interior And A Full Length Zip Or Latch Closure | Custom Or Pre-cut Dense Foam Cradle Holding The Lens Plus Its Support Foot, With A Lid Layer Of Eggshell Or Flat Foam | Internal Cavity Sized From 150 To 300 Mm In Diameter And 250 To 500 Mm Deep Depending On The Lens | Reinforced Carry Handle Plus A Shoulder Strap Attachment Where Supplied | Protects The Lens In Transit And In Storage On The Cart, Portabrace Pro Lens Cups - Soft Padded Lens Pouch (z-mount Nikkor Lenses) : Soft Padded Pouch For Nikon Z Mount Lenses | Water Resistant Woven Outer Fabric With A Padded Closed Cell Foam Lining | Drawstring Or Zip Closure With An Internal Pocket For The Hood Or Caps | Sizes Matched To The Nikkor Z Lenses In Use, From The Compact Primes To The 70-200 Mm And 180-600 Mm Zooms Where Ordered | Belt Or Carabiner Loop For Attaching To A Belt, Cart Or Bag | Provides Drop And Dust Protection During Transport And On-set Swaps, Tilta 0.8 Mod Clamp-on Lens Gear Ring 62mm : Tilta 0.8 Mod Clamp-on Lens Gear Ring For 62 Mm Lens Barrels | 0.8 Mod Gear Pitch Matching Cinema Follow Focus Motors And Standard Lens Gears | Clamp-on Design With A Thumbscrew That Tightens The Ring Onto The Barrel Without Adhesive | Machined Aluminium Ring With A Hard Anodised Finish | Adds A Geared Surface To A Stills Lens For Follow Focus Use | Fits Lens Outer Diameters In The Ring Size Ordered, Tilta 0.8 Mod Clamp-on Lens Gear Ring 77mm : Tilta 0.8 Mod Clamp-on Lens Gear Ring For 77 Mm Lens Outer Diameter | 0.8 Mod Pitch Compatible With Cinema Follow Focus Motors | Clamp-on Thumbscrew Attachment With A Protective Inner Surface That Will Not Mark The Barrel | Aluminium Body, Hard Anodised, With A Continuous Gear Face Around The Circumference | Converts A Photographic Lens To Geared Focus, Iris Or Zoom Control | Sized By The Lens Barrel Outer Diameter, Tilta 0.8 Mod Clamp-on Lens Gear Ring 82mm : Tilta 0.8 Mod Clamp-on Lens Gear Ring For 82 Mm Lens Outer Diameter | 0.8 Mod Gear Pitch To Match Follow Focus Motors And Standard Cinema Gearing | Thumbscrew Clamp Attachment With A Padded Inner Face So The Barrel Is Not Marked | Machined Aluminium With A Hard Anodised Finish And A Full Circumference Gear Face | Enables Follow Focus Drive On Stills Lenses | Ordered By Lens Outer Diameter, Tilta 0.8 Mod Clamp-on Lens Gear Ring 95mm : Tilta 0.8 Mod Clamp-on Lens Gear Ring For 95 Mm Lens Outer Diameter | 0.8 Mod Pitch Compatible With The Follow Focus Motors In Use | Clamp Attachment With A Thumbscrew And A Protective Inner Pad | Hard Anodised Machined Aluminium With A Continuous Gear Face | For Large Diameter Cine And Stills Lenses Requiring Geared Focus, Iris Or Zoom | Ordered By Lens Outer Diameter, Tilta 0.8 Mod Clamp-on Lens Gear Ring 112mm : Tilta 0.8 Mod Clamp-on Lens Gear Ring For 112 Mm Lens Outer Diameter | 0.8 Mod Gear Pitch To Match The Follow Focus Motors | Thumbscrew Clamp Design With An Inner Pad That Protects The Barrel Finish | Machined Aluminium, Hard Anodised, With A Full Circumference Gear Face | Sized For Large Diameter Cine Lenses And Matte Box Adapter Rings | Ordered By Lens Outer Diameter, Tilta 0.8 Mod Gear For Nucleus – M Fiz Motor. (follow Focus Motor Spline) : Spare 0.8 Mod Drive Gear For A Follow Focus Motor Spline | 0.8 Mod Pitch Matched To Lens Gear Rings And Standard Cinema Lens Gears | Machined Metal Or Reinforced Composite Gear That Mounts On The Motor Output Spline | Replaceable On Set Without Dismantling The Motor | Supplied As A Set Of Spare Gears For The Follow Focus Motors In Use | Keeps The Focus, Iris And Zoom Channels Running If A Gear Is Damaged, Dsc Labs Chart Mount / Tripod Adapter Plate : Mounting Plate For Dsc Labs Test Charts | Rigid Plate That Holds A Chart Flat And Square To The Camera Axis | Fitted With A 1/4 In-20 And 3/8 In-16 Thread So The Chart Can Be Mounted On A Tripod Head, C-stand Or Light Stand | Alignment Guides And Clamping Points Sized To The Chart Edge | Prevents The Flexing And Reflection That Would Otherwise Affect Chart Readings | Machined From Rigid Board Or Metal With A Matte Finish, Dsc Labs Handy Oneshot Plus Chart : Dsc Labs Handy Oneshot Plus (hosp) Test Chart | Designed To Capture Camera And Scene Lighting Information In A Single Exposure So That Dailies Reproduce The Cinematographers Intent | Combines Grey Scale Steps, Colour Patches, And Skin Tone And Chroma References On One Surface | Used For Exposure, Colour Balance, Contrast And Camera Matching On Set And In Post | Chart Printed On A Acuflect Light – Wipeable Semi-gloss Substrate With Mounting Points For A Stand Or Chart Mount | Sizes Available Across The Handy Oneshot Range, Gimbal, Dji Rs 4 Pro Gimbal (combo With Focus Pro Motor) : Dji Rs 4 Pro Three-axis Gimbal Stabiliser, Tested Payload 4.5 Kg (10 Lb) | Bg30 Grip Battery, 1950 Mah At 15.4 V, 30 Wh, With Fast Charge And Usb-c Power Output | Weights: Gimbal Approx. 1242 G, Grip Approx. 265 G, Extended Grip And Tripod Approx. 226 G, Upper And Lower Quick-release Plates Approx. 110 G | Folded 289.5 X 167.3 X 267 Mm Excluding Camera And Grip | 2.400 To 2.4835 Ghz Wireless Control Band With Bluetooth 5.1 | Teflon-coated Axes, Auto-lock Axis Locks, 1/4 In-20 Mounting Points, Rsa And Nato Ports | Combo Includes The Dji Focus Pro Motor For Lens Control | 1-year Dji India Warranty, Tilta Advanced Ring Grip For Dji Rs4 Pro:advanced Ring Grip Accessory For The Dji Rs 4 Pro Gimbal | Wraps Around The Gimbal Body To Give Both Hands A Balanced Hold For Low-mode And Handheld Operating | Provides Mounting Points For A Focus Hand Wheel, Monitor And Side Handle Accessories | Quick-release Attachment To The Rs 4 Pro Body Without Tools Carbon Fibre | Supplied With The Fittings Required For The Rs 4 Pro | 1-year Warranty, Tripods (cinema & Photo), Supertech/sachtler Cine Tripod With Fluid Head (100mm Bowl) : Two-stage Cine Tripod With A 100 Mm Bowl Fluid Head | Maximum Height 150 Cm Or More With The Head, Minimum Working Height 60 Cm Or Lower, Folded Length 85 Cm Or Less | Fluid Head With Continuous Or Stepped Pan And Tilt Drag, Counterbalance For Payloads From 10 To 25 Kg, Illuminated Spirit Level And Two Rosette Handle Mounts | Tripod Legs In Aluminium Or Carbon Fibre With Double Spike And Rubber Feet, Plus A Mid-level Or Ground Spreader | Payload Capacity 25 Kg Or More | Supplied With A Padded Carry Case | 1-year Warranty, Manfrotto Mt055xpro3 Aluminium Tripod With 90° Horizontal Column (photo/video) : Manfrotto 055 Aluminium Three-section Tripod With 90 Degree Horizontal Column, Mt055xpro3 | Maximum Height 170 Cm, Minimum Height 9 Cm, Closed Length 61 Cm | Maximum Payload 9 Kg, Weight 2.5 Kg | Quick Power Lock Lever Leg Locks, Easy Link 3/8 In Accessory Attachment, And A Horizontal Column That Swings Through 90 Degrees Without Disassembly | Aluminium Leg Sections With Rubber And Spiked Feet | Supplied With A Shoulder Strap | 2-year Manufacturer Warranty, E-image 7060h Fluid Head Tripod (75mm Bowl) : Video Tripod Kit With A 75 Mm Bowl Fluid Head | Maximum Height 160 Cm Or More, Folded Length 80 Cm Or Less | Fluid Head With Fixed Or Stepped Pan And Tilt Drag, Counterbalance Spring For Payloads Up To 5 Kg And A Slide Plate With 1/4 In-20 And 3/8 In Screws | Two-stage Aluminium Legs With Flip Or Twist Locks, Mid-level Spreader And Dual Spiked Feet With Rubber Covers | Payload Capacity 5 Kg Or More, Kit Weight Under 4 Kg | Supplied With A Soft Carry Case | 1-year Warranty, Camera Support Systems, Nsh Nc-m5 (or) St Video – Film Andy – Flexwing F22 Telescopic Crane With Fluid Head (6.4m / 22 Ft Arm) Motorized Camera Jib (full Kit) : Motorised Camera Jib Supplied As A Complete Kit | Aluminium Alloy Crane With A Length Adjustable By A Single Control Key Without Removing Counterweights | Remote Controlled Pan, Tilt, Zoom And Focus Functions Through The Jib Controller, With A 3-axis Remote Head | Payload For Camera And Lens Up To 5 Kg Or More, Counterweight Set Included | Tripod Or Stand Mounting With A Standard 100 Mm Bowl Or Mitchell Base | Supplied With The Motor Unit, Control Cable, Counterweights And Carry Case | 1-year Warranty (or) Heavy-duty Tripod And Dolly Kit, V-mount / Gold-mount Battery Kit (2-pcs), Track Wheels Kit (3-pcs), One 1.2m Track Section., Handheld Setup, Tilta Lightweight Shoulder Rig (black): Tilta Lightweight Shoulder Rig In Black | Arca-swiss And Manfrotto Compatible Baseplate With Adjustable Balance | Padded Shoulder Mount With Height And Angle Adjustment, And A Quick-release Adapter Plate | Two 15 Mm Lws Rod Clamps With Carbon Fibre Or Aluminium Rods | Multiple 1/4 In-20 And 3/8 In-16 Accessory Points, Plus Nato Rail Where Fitted | Camera Platform Adjustable Fore And Aft | Dedicated Usb-c Cable Supplied For Connecting A Dji Ronin 4d Monitor Where Used, 15mm Lws Rod System, 15mm Carbon Fiber Rods 12" (30cm) – Pair : Pair Of 15 Mm Carbon Fibre Support Rods, 12 In (30 Cm) Long | 15 Mm Outside Diameter With A Tolerance Suitable For 15 Mm Lws Rod Clamps | Carbon Fibre Tube With Machined Aluminium End Plugs And Internal Thread For Extending Or Capping | Weight Approximately 60 G Per Rod | Rigid Under The Load Of Matte Boxes, Follow Focus Units And Lens Supports | Supplied As A Matched Pair, 15mm Carbon Fiber Rods 6" (15cm) – Pair: Pair Of 15 Mm Carbon Fibre Support Rods, 6 In (15 Cm) Long | 15 Mm Outside Diameter To The Lws Standard For Rod Clamps And Brackets | Carbon Fibre Tube With Aluminium End Plugs And Threaded Ends | Weight Approximately 40 G Per Rod | Used For Compact Rigs Offering Matte Box And Follow Focus Support Close To The Camera Body | Supplied As A Matched Pair, 15mm Carbon Fiber Rods 18" (45cm) – Pair: Pair Of 15 Mm Carbon Fibre Support Rods, 18 In (45 Cm) Long | 15 Mm Outside Diameter To The Lws Standard | Carbon Fibre Tube With Machined Aluminium End Plugs And Threaded Interiors | Weight Approximately 85 G Per Rod | Provides Long Support For Heavy Matte Boxes And Lens Support Brackets On Studio Rigs | Supplied As A Matched Pair, Smallrig 15mm Lws Baseplate For Nikon Zr: Smallrig 15 Mm Lws Baseplate For The Nikon Zr | Machined Aluminium Baseplate With A Fitting Camera Plate Matched To The Nikon Zr Body Profile | Two Rod Ports At 15 Mm Lws Spacing With Locking Screws, Offering Fore And Aft Adjustment | 1/4 In-20 And 3/8 In-16 Mounting Points On The Underside For Tripod And Gimbal Plates, Plus An Arri Dovetail Or Manfrotto Option Where Fitted | Anti-twist Locating Pins To Protect The Camera Mount | Weight Under 300 G, Smallrig 15mm Lws Baseplate For Nikon Z9: Smallrig 15 Mm Lws Baseplate For The Nikon Z9 | Aluminium Baseplate With A Body-matched Camera Plate And Anti-twist Pins | Two 15 Mm Lws Rod Ports With Locking Screws And Fore-aft Adjustment | 1/4 In-20 And 3/8 In-16 Threads On The Base For Tripod, Gimbal And Shoulder-rig Attachment | Optional Arri Dovetail Or Manfrotto Plate Compatibility Where Supplied | Weight Under 300 G, Spare 15mm Rod Pair In Carry Pouch: Spare Pair Of 15 Mm Support Rods Of The Standard Lws Diameter, Supplied In A Padded Canvas Carry Pouch | Machined Aluminium Or Carbon Fibre Tube With Threaded Ends For Extension | Rod Length As Ordered To Match The Rigs In Use | Pouch With Individual Rod Sleeves, A Closure Flap And A Belt Or Cart Attachment Loop | Used To Replace Rods During A Shoot Without Carrying Loose Tubes, Wireless Follow Focus, Tilta Nucleus-m Ii Wireless Follow Focus (dual Motor Kit) : Wireless Follow Focus System Supplied As A Dual Motor Kit | Hand Unit With A Large Focus Knob, An Lcd Display, Marking Ring And An Adjustable Resistance Knob, Controlling Up To Four Motors | Two Drive Motors With Interchangeable 0.8 Mod Gear Rings And 15 Mm Or 19 Mm Rod Mounting | Wireless Control Over 2.4 Ghz With A Working Range Of Several Hundred Metres In Open Air | Motors And Hand Unit Powered By Separate Rechargeable Batteries With Status Indication On The Display | Run And Stop Camera Control And Iris Or Zoom Mapping | Supplied With Mounting Brackets, Cables, Motor Gears And A Carry Case | 1-year Warranty, Tilta Nucleus-m Ii Additional Motor (3-axis): Additional Drive Motor For The Nucleus-m Ii System, Allowing A Third Axis Of Lens Control | 0.8 Mod Interchangeable Gear Rings For Cinema And Photographic Lenses | Rod Mounted Through The Supplied 15 Mm Or 19 Mm Bracket | Powered And Controlled From The Hand Unit Or The Motor Daisy Chain With 7-pin Lemo Interconnects | Compatible With The Existing Nucleus-m Ii Hand Unit And Firmware | Supplied With Bracket And Gear Set, Wireless Video Transmission (dji), Dji Transmission System (tx + Rx Combo) : Dji Transmission Wireless Video System Supplied As A Transmitter And Receiver Combo | Dji Video Transmitter Approx. 350 G And 127 X 87 X 26 Mm Excluding Antennas; Dji Video Receiver Approx. 350 G And 127 X 87 X 26 Mm | Operates In The 2.400 To 2.484 Ghz, 5.150 To 5.250 Ghz And 5.725 To 5.850 Ghz Bands, With Additional 5.250 To 5.350, 5.470 To 5.600 And 5.650 To 5.725 Ghz Bands Depending On Region | Supports 3g-sdi And Hdmi Inputs, 1080p Transmission With Embedded Audio, And Timecode Or Genlock Synchronisation | Powered By Dc Input Or The Camera Battery Through A Dedicated Plate | 1-year Dji India Warranty, On-camera Monitors & Recorders, Dji High Bright Monitor (rx Built-in): Dji High-bright Remote Monitor With The Wireless Receiver Built In | Approx. 727 G And 213 X 135 X 51 Mm Excluding Antennas | High-brightness Panel For Daylight Viewing With On-screen Monitoring Tools Including Waveforms, Focus Assist And Markers | Receives The Video Transmitter Signal Directly In The 2.400 To 2.484 Ghz, 5.150 To 5.250 Ghz And 5.725 To 5.850 Ghz Bands |hdmi 2.0 Input On Base: Sdi / Hdmi Out + Dc In Via Expansion Plate| Powered By An Internal Battery Or External Dc | 1-year Dji India Warranty, Dji Remote Monitor Expansion Plate (sdi/hdmi/dc-in): Expansion Plate For The Dji High-bright Remote Monitor | Adds Sdi Out, Hdmi Out, Dc In (no Sdi Input) Connectors To The Monitor Body | Passive Pass-through Design With No External Power Needed For The Plate Itself | Mounting Points On The Underside For A Light Stand, Articulating Arm Or Monitor Bracket | Machined And Reinforced Construction Matched To The Monitors Rear Profile | Supplied With The Mounting Screws And A Protective Cover, Monitor Mounts + Arms, Smallrig Articulating Magic Arm With Super Clamp: Articulating Magic Arm With A Super Clamp, 5.8 In (147 Mm) Class Reach | Supports Up To 5 Kg With Friction-tightened Ball Joints At Each End | 1/4 In-20 Screw At One End And A Super Clamp With Padded Jaws At The Other, With A 3/8 In-16 Option Where Supplied | Ball Joints Tighten Independently From A Single Lever So The Arm Holds Position Without Moving The Camera Or Monitor | Aluminium Arm With Stainless Steel Screws | Super Clamp Jaw Opening To Grip 13 To 60 Mm Tubes, Plates And Stands, Matthews Baby Ball Head Adapter 415173. 5/8" Baby Pin To Monitor Mount (ball Head): Monitor Mount With A 5/8 In (16 Mm) Baby Pin And A Ball Head | 1/4 In-20 Screw With A Locking Thumbwheel For The Monitor Or Accessory Thread | Ball Head Offers Adjustment Through A Wide Arc, Locked By A Single Lever | Payload Up To 3 Kg With The Joint Locked | Aluminium And Stainless Steel Construction With A Knurled Baby Pin For A Positive Grip In The Stand Head | Height Of The Assembly Approximately 90 Mm, Small Rig Cold Shoe To Nato Clamp 1652 (nato Rail Clamp + Cold Shoe Adapter): Nato Rail Clamp With An Integrated Cold Shoe Adapter | Clamp Grips A Standard Nato Rail With A Screw-down Lever That Cannot Be Over-tightened | Cold Shoe On The Upper Face Accepts Monitors, Microphones And Small Led Fittings | 1/4 In-20 And 3/8 In-16 Threads On The Clamp Body For Additional Accessories | Machined Aluminium With An Anodised Finish | Weight Under 100 G, Expert Shield Exact – Fit (red Touch 7, Nikon Zr, Z9, Dji High – Bright-7) Screen Protector (tempered Glass) - Set Of 4: Tempered Glass Screen Protectors Supplied As A Set Of Four | 9h Surface Hardness With A 0.3 Mm Glass Thickness, Rounded Edges And Full Coverage Of The Camera Or Monitor Screen | Oleophobic And Hydrophobic Coating To Resist Fingerprints And Water Spots | Anti-shatter Layering Holds Fragments Together If The Glass Breaks | Applied Without Adhesive Residue Using The Supplied Cleaning Wipe, Dust Removal Sticker And Microfibre Cloth | Sized To The Camera And Monitor Screens In Use, Hdmi Cables, Canare Premium Hdmi (hdm Series). Hdmi 2.0 Type A To Type A - 1.5ft (0.5m): Hdmi 2.0 Type A To Type A Cable, 1.5 Ft (0.5 M) | 18 Gb/s Aggregate Bandwidth Supporting 4k Uhd 3840 X 2160 At 60 Hz In 4:4:4 8-bit, Plus Hdr10 And Dolby Vision | Hdcp 2.2 Compliant | 24 Awg Oxygen-free Copper Conductors With Triple Shielding Against Emi | Gold-plated Connectors, Moulded Strain Relief, Flexible Pvc Jacket Rated For Repeated On-set Coiling, Canare Premium Hdmi (hdm Series). Hdmi 2.0 Type A To Type A - 3ft (1m): Hdmi 2.0 Type A To Type A Cable, 3 Ft (1 M) | 18 Gb/s Bandwidth Supporting 4k Uhd At 60 Hz 4:4:4, Hdr10 And Dolby Vision, And 1080p At 120 Hz | Hdcp 2.2 Compliant With Ethernet And Audio Return Channel Support | 24 Awg Copper Conductors With Aluminium Foil And Braid Shielding | Gold-plated Contacts, Moulded Strain Relief, Slim Connector Shells For Tight Camera Builds, Canare Premium Hdmi (hdm Series). Hdmi 2.0 Type A To Type A - 6ft (2m): Hdmi 2.0 Type A To Type A Cable, 6 Ft (2 M) | 18 Gb/s Bandwidth, 4k Uhd 60 Hz 4:4:4, Hdr10, Dolby Vision, Hdcp 2.2 | 24 Awg Oxygen-free Copper With Triple Shielding | Gold-plated Connectors And Moulded Strain Relief | Flexible Jacket And Slim Shells So The Cable Suits Monitor Runs On Camera Cages, Canare Premium Hdmi (hdm Series). Hdmi 2.0 Type A To Type A - 10ft (3m): Hdmi 2.0 Type A To Type A Cable, 10 Ft (3 M) | 18 Gb/s Bandwidth, 4k Uhd 60 Hz 4:4:4, Hdr, Hdcp 2.2 | 24 Awg Oxygen-free Copper Conductors With Braid And Foil Shielding Rated For 3 M Runs At Full 18 Gb/s | Gold-plated Connectors, Moulded Strain Relief | Suitable For Camera To Monitor And Switcher Feeds On Set, Canare Premium Hdmi (hdm Series). Hdmi 2.0 Type A To Type A - 25ft (7.5m): Hdmi 2.0 Type A To Type A Cable, 25 Ft (7.5 M) | 18 Gb/s Bandwidth, 4k Uhd 60 Hz 4:4:4, Hdr And Hdcp 2.2 At Full Length Without A Repeater | 24 Awg Tinned Copper Conductors With Heavy Braid Shielding To Hold 18 Gb/s Over The Run | Gold-plated Connectors And Moulded Strain Relief | Long-run Cable For Video Village And Monitor Positions Away From Camera, Sdi / Bnc Cables, Canare 12g-sdi Bnc Assemblies. Bnc 12g-sdi - 1.5ft (0.5m) - L Type: Bnc 12g-sdi Cable, 1.5 Ft (0.5 M), Right-angle (l-type) Connectors | Smpte St 2082-1 12g-sdi Compliant Carrying 4096 X 2160 And 3840 X 2160 At 60p In 4:2:2 10-bit | 75 Ohm Coaxial Construction Of The Belden 1694a Class With Tinned Copper Braid | Right-angle Bnc Plugs At Both Ends For Tight Camera And Monitor Builds | Low-loss Dielectric With A Locking Bayonet That Cannot Be Pulled Out Under Vibration, Canare 12g-sdi Bnc Assemblies. Bnc 12g-sdi - 3ft (1m) - L Type: Bnc 12g-sdi Cable, 3 Ft (1 M), Right-angle (l-type) Connectors | 12g-sdi To Smpte St 2082-1, Supporting 4k Dci And Uhd At 60p, 10-bit 4:2:2 | 75 Ohm Coax Of The Belden 1694a Class, Low-loss Foam Dielectric | Right-angle Bnc At Both Ends | Bayonet Locking Connectors And Flexible Jacket For Camera-cage Routing, Canare 12g-sdi Bnc Assemblies. Bnc 12g-sdi - 10ft (3m) - L Type: Bnc 12g-sdi Cable, 10 Ft (3 M), Right-angle (l-type) Connectors | 12g-sdi To Smpte St 2082-1 With 4k 60p 10-bit 4:2:2 Transport At 3 M | 75 Ohm Low-loss Coaxial Cable With High Coverage Braid Shielding | Right-angle Bnc Plugs | Suited To Camera To Monitor And Video Village Runs, Canare 12g-sdi Bnc Assemblies. Bnc 12g-sdi - 25ft (7.5m) - L Type: Bnc 12g-sdi Cable, 25 Ft (7.5 M), Right-angle (l-type) Connectors | 12g-sdi To Smpte St 2082-1 At Full Length Supporting 4k 60p 10-bit 4:2:2 | 75 Ohm Low-loss Coaxial Construction With Heavier Gauge Centre Conductor For Long Runs | Right-angle Bnc Plugs With Locking Bayonets | For Monitor And Video Village Feeds Across The Studio Floor, Canare 12g-sdi Bnc Assemblies. Bnc 12g-sdi - 50ft (15m) - L Type: Bnc 12g-sdi Cable, 50 Ft (15 M), Right-angle (l-type) Connectors | 12g-sdi To Smpte St 2082-1 Over 15 M For 4k 60p 10-bit 4:2:2 | 75 Ohm Precision Coaxial Cable With Low Attenuation At 6 Ghz And Double Braid Shield | Right-angle Bnc Plugs, Locking Bayonet | Long Run Cable For Video Village And Distant Monitor Positions, 12g-sdi Bnc Right-angle To Right-angle (ignite Digi): Ignite Digi 12g-sdi Bnc Cable, Right-angle To Right-angle | 12g-sdi To Smpte St 2082-1 Supporting 4k And Uhd At 60p In 10-bit 4:2:2 | 75 Ohm Low-loss Coaxial Construction Rated For 12g Signal Integrity Over The Stated Length | Right-angle Bnc Plugs At Both Ends To Sit Flat Against Red Komodo-x And V-raptor Xe Bodies And Their Cages | Bayonet Locking Connectors With Moulded Strain Relief | Custom Length Made To The Required Length, Fiz Cable + D-tap Power Cables, Fiz Cable - 2-pin Lemo To 7-pin Lemo (ignite Digi): Ignite Digi Fiz Cable, 2-pin Lemo To 7-pin Lemo | Dedicated Cable Linking A Red Dsmc3 Body To Follow Focus, Iris And Zoom Motor Controllers | 2-pin Lemo Connector At The Camera End And 7-pin Lemo At The Motor End | Shielded Multi-core Construction With Strain Relief At Both Boots | Right-angle Or Straight Shells As Required To Clear Camera Cages | Custom Length To The Required Length, Kondor Blue D-tap Cables - (power Cable - D-tap To Red Komodo-x + V-raptor Xe): D-tap To Red Komodo-x And V-raptor Xe Power Cable | Regulated Power Cable Feeding A Red Dsmc3 Body From A V-mount Or Gold-mount Battery Plate Through The Cameras Dc Input | D-tap Plug With Locking Clip At The Battery End, And The Correct Barrel Or Lemo Connector For The Komodo-x And V-raptor Xe At The Camera End | Heavy Gauge Conductors Sized For The Cameras Current Draw With Low Voltage Drop | Shielded Cable With Reinforced Strain Relief At Both Boots, Kondor Blue D-tap Cables - D-tap To Dc Barrel Cable (monitor Power): D-tap To Dc Barrel Power Cable For Monitors | Powers An On-camera Monitor From The Camera Battery Or Plate | D-tap Plug With Locking Clip To A 2.1 Mm Or 2.5 Mm Dc Barrel Plug, Centre Positive | Rated To Carry The Monitor Current At 12 V With Negligible Voltage Drop | Reinforced Strain Relief At Both Ends And A Shielded Jacket For On-cage Routing, Kondor Blue D-tap Cables - D-tap To Usb-c Pd Cable (100w): D-tap To Usb-c Pd Cable, 100 W | Powers And Charges Usb-c Devices Such As Laptops, Monitors And Tablets From A 12 To 16 V Camera Battery Through The D-tap Output | Negotiates Usb Power Delivery Up To 100 W At 20 V Over A 5 A E-marked Cable | D-tap Plug With Locking Clip To Usb-c Male | Built-in Pd Negotiation Circuitry With Short Circuit And Over Current Protection | Braided Jacket With Moulded Strain Relief, Wooden Camera D-tap 1 To 4 Splitter: D-tap 1-to-4 Splitter | Splits One D-tap Battery Output Into Four D-tap Feeds | Both Outputs Rated To Carry The Combined Current Of The Attached Accessories At 12 To 16 V | Male D-tap To Two Female D-tap Receptacles, Each With A Locking Tab | Short-body Design To Reduce Leverage On The Battery Plate | Reinforced Boots And A Shielded Jacket, Sdi -> Hdmi Converters, Blackmagic Micro Converter Hdmi To Sdi 12g : Blackmagic Design Micro Converter Hdmi To Sdi 12g | Converts An Hdmi Input To Two 12g-sdi Outputs | Hdmi 2.0 Input With 8 Channels Of Embedded Audio; Sdi Output At 270 Mb, 1.5g, 3g, 6g And 12g With 16 Channels Of Embedded Audio | Supports Up To 2160p60 With Automatic Switching Of Video Standards | Usb-c Powered From Any 5 V Supply Or The Included Adapter, Suitable For Battery Operation | Compact Metal Body With Status Led | 3-year Limited Manufacturer Warranty, Blackmagic Micro Converter Sdi To Hdmi 12g : Blackmagic Design Micro Converter Sdi To Hdmi 12g | Converts A 12g-sdi Input To An Hdmi Output With Loop-through | Sdi Input At 270 Mb, 1.5g, 3g, 6g And 12g With 16 Channels Of Embedded Audio, Plus A Loop-through Sdi Output; Hdmi 2.0 Output With 8 Channels Of Embedded Audio | Handles Up To 2160p60 With Automatic Standard Detection | Usb-c Powered From 5 V With Battery Operation Supported | Compact Metal Body With Status Led | 3-year Limited Manufacturer Warranty, Cable Clamps + Strain Relief, Smallrig Hdmi Cable Clamp : Smallrig Hdmi Cable Clamp | Locks An Hdmi Connector To The Camera Or Cage To Prevent The Port Being Stressed | Two-piece Aluminium Clamp With A Screw Lock That Grips The Cable Boot | Fits Standard Hdmi And Micro-hdmi Connector Shells With An Adjustable Clamp Height | 1/4 In-20 Mounting Screw For Attachment To Cages And Brackets | Weight Under 40 G, Smallrig Usb-c Cable Clamp : Smallrig Usb-c Cable Clamp | Secures A Usb-c Connector Against A Camera Or C