- Home
- >
- Tender
- >
- Gujarat Tender
- >
- Department of Pandit Deendayal Energy University
- >
NTID 44891014
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertTender For Interior Works Of A in Gandhinagar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Tender For Interior Works Of A" in Gandhinagar, India.
Pandit Deendayal Energy University
Gandhinagar, Gujarat, India
NTID 44891014
- Opening Date : Refer Documents
- Closing Date : Tue 28th April, 2026
- ₹ 0.00
- NTID 44891014
Key Values: Document Cost: 0.00 | EMD: 400000.00 | Estimated Cost: 0.00
Tender Description
Tender For Interior Works Of Academic Block F1 At Pdeu Campus, Gandhinagar
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
400000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 124 | Total Qty : 70816
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | DOOR WINDOWS, PARTITION AND PANELLING WORKNote - 1. Plywood (BWP grade IS 710), laminate or other composite wood-based products shall be free of urea formaldehyde. 2. All veneer, and wood shall be FSC (Forest Stewardship Council) and Green Guard Certified.3. All loose samples of materials shall be approved by the Engineer in charge.4. All adhesives and sealants shall be with low VOC and lead-free with acceptable VOC content as per requirements.5. The contractor shall prepare a shop drawing based on the intent/ concept drawing and get approval from the Engineer-in-Charge. The contractor shall prepare mock-up doors, windows, partition and other elements with all required hardware and approved by the Engineer-in-Charge before execution of work. Work shall be carried out as per the final approved shop drawing and approved mock-up. The contractor shall be responsible against stability, safety, leakage, etc all complete. Testing work shall be carried out by the Contractor as suggested by the Engineer in charge. (If required).6. All types of locks shall be with computerized 3 No. keys (SS 304) and master keys (if mentioned in the nomenclature of the item). The grouping of master keys shall be as suggested by the Engineer-in-Charge. Nothing extra shall be payable for the master key provision.7. Contractor shall make provision for access control system and other mechanical/ automation devices, coordinate with other services work, and make goods, etc complete.8. All Doors, windows, partition and other elements shall be fabricated and finished at the factory/ workshop, and only fixing and final finishing shall be executed at the site unless otherwise approved by the Engineer-in-charge. 9. Door, window, partition and other elements work shall be carried out for all floors, all levels, all heights, and all places including loading, unloading, stacking, transporting, hoisting, and erecting by any means (mechanical or manual).Teak wood frames for doors/windows etc. Providing and fixing frames for duct shuter, frames for interior works, doors, windows, transoms, louvers and ventilators, sills, jambs, skirting, and any type of interior work, using best quality kiln seasoned, termite treated first-class teak wood and fixed in position with hold fast lugs or with dash fasteners with required dia. and length of an approved make, etc. for all levels, all floors, all heights, etc as per the issued drawing and as directed by the Engineer-in-charge. The rate shall be inclusive of all types of consumables, accessories, fasteners, and any type of corner treatment (i.e. champering, pencil corner, bevelling, moulding, etc.). Polishing shall be paid as per relevant Tender items.The Contractor shall get the approval for the loose sample of first-class teak wood along with its source location from the Engineer-in-charge before execution. actual installed volume of teak wood shall be measured for payment without considering any wastage. | 1.000 | Cum |
| 2 | DOOR WINDOWS, PARTITION AND PANELLING WORKNote - 1. Plywood (BWP grade IS 710), laminate or other composite wood-based products shall be free of urea formaldehyde. 2. All veneer, and wood shall be FSC (Forest Stewardship Council) and Green Guard Certified.3. All loose samples of materials shall be approved by the Engineer in charge.4. All adhesives and sealants shall be with low VOC and lead-free with acceptable VOC content as per requirements.5. The contractor shall prepare a shop drawing based on the intent/ concept drawing and get approval from the Engineer-in-Charge. The contractor shall prepare mock-up doors, windows, partition and other elements with all required hardware and approved by the Engineer-in-Charge before execution of work. Work shall be carried out as per the final approved shop drawing and approved mock-up. The contractor shall be responsible against stability, safety, leakage, etc all complete. Testing work shall be carried out by the Contractor as suggested by the Engineer in charge. (If required).6. All types of locks shall be with computerized 3 No. keys (SS 304) and master keys (if mentioned in the nomenclature of the item). The grouping of master keys shall be as suggested by the Engineer-in-Charge. Nothing extra shall be payable for the master key provision.7. Contractor shall make provision for access control system and other mechanical/ automation devices, coordinate with other services work, and make goods, etc complete.8. All Doors, windows, partition and other elements shall be fabricated and finished at the factory/ workshop, and only fixing and final finishing shall be executed at the site unless otherwise approved by the Engineer-in-charge. 9. Door, window, partition and other elements work shall be carried out for all floors, all levels, all heights, and all places including loading, unloading, stacking, transporting, hoisting, and erecting by any means (mechanical or manual).Teak wood frames for doors/windows etc. Providing and fixing frames for duct shuter, frames for interior works, doors, windows, transoms, louvers and ventilators, sills, jambs, skirting, and any type of interior work, using best quality kiln seasoned, termite treated first-class teak wood and fixed in position with hold fast lugs or with dash fasteners with required dia. and length of an approved make, etc. for all levels, all floors, all heights, etc as per the issued drawing and as directed by the Engineer-in-charge. The rate shall be inclusive of all types of consumables, accessories, fasteners, and any type of corner treatment (i.e. champering, pencil corner, bevelling, moulding, etc.). Polishing shall be paid as per relevant Tender items.The Contractor shall get the approval for the loose sample of first-class teak wood along with its source location from the Engineer-in-charge before execution. actual installed volume of teak wood shall be measured for payment without considering any wastage. | 1.000 | Cum |
| 3 | Providing and fixing in position frames/ shutter for any type of aluminium work like aluminium door, composite door-window, window (sliding, openable, side hung, top hung, fixed etc.), casement window, aluminium partition, aluminium fixed louvers, fixed window with any type of aluminium sections of approved make having minimum 50 micron pure polyester powder coating of approved shade, texture and colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge.Rate shall be inclusive of providing any type of aluminium sections, cutting, fabrication, errection and fixing to the best workmanship manner, including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners ofapproved make for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting stile and horizontal rails; 6) providing and fixing packing at every 600mm c/c of PVC shims of required size; 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed and Metal) weather silicon sealant of approved make and color. 8) Termite treated seasoned teak wood as infill material to installe hardware in door shutter and frame as and when required but excluding. 1) necessary hardware; 2) Glazing or panelling material and shutter.Shop drawing shall be prepared and get approved from the consultants before procurement of material by the contractor. Work shall carried out as per the approved shop drawings and approved sample. Actual weight of installed Aluminium sections which are visible shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period. | 100.000 | Kg |
| 4 | Providing and fixing in position frames/ shutter for any type of aluminium work like aluminium door, composite door-window, window (sliding, openable, side hung, top hung, fixed etc.), casement window, aluminium partition, aluminium fixed louvers, fixed window with any type of aluminium sections of approved make having minimum 50 micron pure polyester powder coating of approved shade, texture and colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge.Rate shall be inclusive of providing any type of aluminium sections, cutting, fabrication, errection and fixing to the best workmanship manner, including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners ofapproved make for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting stile and horizontal rails; 6) providing and fixing packing at every 600mm c/c of PVC shims of required size; 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed and Metal) weather silicon sealant of approved make and color. 8) Termite treated seasoned teak wood as infill material to installe hardware in door shutter and frame as and when required but excluding. 1) necessary hardware; 2) Glazing or panelling material and shutter.Shop drawing shall be prepared and get approved from the consultants before procurement of material by the contractor. Work shall carried out as per the approved shop drawings and approved sample. Actual weight of installed Aluminium sections which are visible shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period. | 100.000 | Kg |
| 5 | Providing and fixing factory made laminated/ veneer finish 35mm thick flush door shutter excluding thickness of veneer/ laminate, made of ISI marked non decorative type flush door shutters conforming to IS:2202 (Part I), core of block board construction with frame of 1st class hard wood, pine filler and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters having laminates/ veneer of approved make, shade, finish (which paid separately) as approved by Engineer-in-charge on both faces of shutter fixed with phenol formaldehyde synthetic resin type adhesive conforming to IS 848 including providing and fixing 6mm thick peripherial external lipping made out of superior class teak wood, on all edges of door shutter with specified polishing on all exposed faces of lipping including fixing shutters etc complete for all floor all level as per drawings and as directed by Engineer-in-charge. Door frame shall be with suitable acoustic peripheral door seal of approved make and shade at three side of frame. Rate shall be inclusive of flush shutter, lipping, necessary consumable, accessories, PU polishing etc but excluding the cost of veneer/ laminates, all required hardware etc complete for all height as per drawing, design and direction by Engineer-in-charge. Out to out dimension including beading thickness shall be measured for payment. | 412.000 | Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054