Tender for DELHI DEVELOPMENT AUTHORITY - NTID 30520059
DELHI DEVELOPMENT AUTHORITY
Delhi, Delhi, India
NTID 30520059
- Opening Date : Fri 3rd February, 2023
- Closing Date : Thu 2nd February, 2023
- ₹ 19306292.00
- NTID 30520059
Supplying And Replacement Of Street Lights Installed At Mvr-iii, Kondli Mvp-iii, Mayur Vihar, Ghaipur, Vidhi Apartments, Shastri Park, Kondli Gharoli, Jasola, Molar Band, I.p. Ext. And Tahirpur For The Year 2022-23.
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
386126.00 -
Document Cost
Refer Documents -
Estimated Cost
19306292.00
BOQ Items Total Items : 32 | Total Qty : 17218
# | Item | Quantity | Units |
---|---|---|---|
1 | Supply, erection, testing and commissioning of hot dip galvanized octagonal steel pole of 12 Mtr. height and made of 4 mm thick sheet, having bottom 200 mm OAF & top 100 mm OAF, hot dip galvanized M.S base plate of size 320 mm x 320mm x 20 mm thick, single overhang bracket made of 3.60 mm thick hot dip galvanized M.S. pipe with 1.0 Mtr. long tube of suitable dia to accommodate the pole & fittings, on existing RCC foundation with GI bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc. complete as per drawing & technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos mounting strips with tapped holes:- (a) 6 mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b) 4 nos. 40 Amp terminal block suitable for following conductor/cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length-on the existing phenolic laminated/bakelite sheet. (i) 16 sq mm conductor 4 nos and short links 4-nos. (ii) Terminal suitable for 6 SWG GI wire / 1.5 sq mm wire. (c) 6 Amp SP MCB,10 kA C Series-1 nos. including mountings on DIN channel, Earthing i/c washers, springs washers & nuts complete as required etc. (d) Suitable arrangement for saddling of incoming / outgoing cables i/c lugs thimbles etc as required. | 10.00 | Each |
2 | Supply and installation of hot dip Galvanized 7 m Octagonal pole, 130 mm bottom, 70 mm top, 4 mm section thickness, PCD 320 mm with base plate of 270 x 270 x 20 mm, Include 1 set of Foundation Accessories, each set consists of 4 nos. of M 20 x 750mm bolts (L Type) with 2nos of templates each pole. Supply of hot dip Galvanized Single arm Bracket 1000 MM. including following accessories with mounted inbuilt control box and nut, making connection , interconnection with suitable size of copper wire with thimble / lugs in the connector box , earthing , making / numbering of pole etc. a) 6mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing strips inside the flush door. b) (i) 32 Amp terminal block suitable for following conductor/ cable, fixed on DIN channels i/c pdg. 01 no. (ii) Suitable size terminal for connection of 2Cx25 sq mm cable (incoming & outgoing looping) & 3CX1.5 sq mm cable wire for fitting (iii) Terminal suitable for 6 SWG GI wire / 2.5 sq mm wire. c) SP MCB 10Amp,10KA with din bar -01 no. d) Earth stud. | 2.00 | Each |
3 | Supply and installation of hot dip Galvanized 11 m Octagonal pole, 200 mm bottom, 100 mm top, 4 mm section thickness, PCD 320 mm with base plate of 320 x 320 x 20 mm, Include 1 set of Foundation Accessories, each set consists of 4 nos. of M 24 x 850mm bolts (L Type) with 2nos of templates each pole. Supply of hot dip Galvanized Double arm Bracket 1000 MM. including following accessories with mounted inbuilt control box and nut, making connection , interconnection with suitable size of copper wire with thimble / lugs in the connector box , earthing , making / numbering of pole etc. a) 6mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing strips inside the flush door. b) (i) 32 Amp terminal block suitable for following conductor/ cable, fixed on DIN channels i/c pdg. 01 no. (ii) Suitable size terminal for connection of 2Cx25 sq mm cable (incoming & outgoing looping) & 3CX1.5 sq mm cable wire for fitting (iii) Terminal suitable for 6 SWG GI wire / 2.5 sq mm wire. c) SP MCB 10Amp,10KA with din bar -01 no. d) Earth stud. | 2.00 | Each |
4 | Replacement & Supply, erection, testing and commissioning of hot dip galvanized octagonal steel pole of 8 Mtr. height and made of 3 mm thick sheet, having bottom 135 mm OAF & top 70 mm OAF, hot dip galvanized M.S base plate of size 225 mm x 225 mm x 16 mm thick, single overhang bracket made of 3.60 mm thick hot dip galvanized M.S. pipe with 1.0 Mtr. long tube of suitable dia to accommodate the pole & fittings, on existing RCC foundation with GI bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc. complete as per drawing & technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos mounting strips with tapped holes:- (a) 6 mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b) 4 nos. 40 Amp terminal block suitable for following conductor/cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length-on the existing phenolic laminated/bakelite sheet. (i) 16 sq mm conductor 4 nos and short links 4-nos. (ii) Terminal suitable for 6 SWG GI wire / 1.5 sq mm wire. (c) 6 Amp SP MCB,10 kA C Series-1 nos. including mountings on DIN channel, Earthing i/c washers, springs washers & nuts complete as required etc. (d) Suitable arrangement for saddling of incoming/outgoing cables i/c lugs thimbles etc as required. | 5.00 | Each |
5 | Foundation nuts & bolts Erection of metallic pole of 8 metre length in cement concrete1:2:4 (1: cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) reinforced cement concrete foundation of size 500 mm x 500 mm x 1600 mm deep i.e. excavation of earth,providing cutting,bending and placing in position,reinforcement of cold twisted bars of 12 mm dia 1760 mm long (approx) 8 nos. and reinforcenment ring of cold twisted bar of 8 mm dia-1800 mm (approx.) 10 nos.(with 150 mm spacing) as reqd. i/c 4 Nos. M 20 x 700 mm long plus 100 mm bent ( 150 mm top threaded portion) G.I. foundation bolt (EN 8 grade) and anchor / template of size 220 mm X 220 mm X 3 mm with 3 Nos GI nuts and 2 nos GI washers per bolt and providing 63 mm DWC pipe for cable entry & exit etc. complete as reqd. | 7.00 | Each |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane