- Home
- >
- Tender
- >
- Telangana Tender
- >
- Department of Atomic Minerals Directorate for Exploration and Research
- >
NTID 47054201
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply Fabrication And Instal in Hyderabad - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply Fabrication And Instal" in Hyderabad, India.
- Opening Date : Thu 22nd October, 2026
- Closing Date : Wed 21st October, 2026
- ₹ 4344620.00
- NTID 47054201
Key Values: Document Cost: 0.00 | EMD: 86892.00 | Estimated Cost: 4344620.00
Tender Description
Supply, Fabrication And Installation Of Laboratory Facilities For Chemistry Laboratory In Amd Complex, Scr , Cherlapally, Hyderabad.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
86892.00 -
Document Cost
Refer Documents -
Estimated Cost
4344620.00
BOQ Items Total Items : 16 | Total Qty : 18
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Note:- 1. The Bidder should not consider EPF and ESI in his rates. The bidder should be an official member of SEFA (Scientific Equipment and Furniture Association) and copy of SEFA certificate shall be submitted along with bid documents. Without SEFA Certificate the bid will be rejected in technical evaluation. 2. The bidder must provide valid SEFA third-party test certificate from any leading testing laboratories for Fume Hoods and furniture as per standard of SEFA – 8M or SEFA – 8W. | ||
| 2 | Supplying, fabricating, installation and commissioning of Laboratory Wall Bench (WB-1) of size 4750 × 900 × 900 mm, comprising C-frame structure made of 60×30×2 mm hollow sections, duly treated and finished with 16 mm thick phenolic resin (Trespa or equivalent make) worktop, including 750 mm wide storage units (1 drawer & 2 shutters), PP sink (600 (L)×450(W)×315(D) mm) with plumbing, three-way water tap with swan neck spout, PP adjustable pegboard (600×600 mm) with 46 Nos PP pegs, double outlet eye wash SS breaded flexible, GI powder coated electrical raceway, single-sided two-tier reagent rack in GI construct, 6/16 Amp sockets with 16 Amp oneway switch, GI filler panel & closed panels, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. | 1 | Nos |
| 3 | Supplying, fabricating, installation and commissioning of Laboratory Wall Bench/Wall cabinet (WB-2) of size L (4260 × 3560)x W 900 mm x H in mm , comprising C-frame structure made of 60×30×2 mm hollow pipe sections, duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including 750 mm wide storage module (1 drawer & 2 shutters), 600mm wide storage module (1 drawer & 2 shutters) and 550mm wide storage module (1 drawer & 2 shutters) , Worktop mounted electrical raceway in GI powder coated, single-sided two-tier reagent rack in GI construct, 6/16 Amp electrical sockets with 16 Amp oneway switch, GI filler panel & closed panels, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. | 2 | Nos |
| 4 | Supplying, fabricating, installation and commissioning of Laboratory Corner bench/Cabinet (CB-1) of size L 1030mm X W 1030 mm X H 900mm , duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including corner storage module with one shutter, Single piece molded PP sink (L 600mm X W 450mm X D 315mm), Worktop mounted three way water tap with swan neck spout, PP adjustable pegboard (600×600 mm) with 46 nos PP pegs, double outlet eye wash with SS breaded flexible , GI filler panel, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. | 1 | Nos |
| 5 | Supplying, fabricating, installation and commissioning of laboratory wall bench/cabinet (WB-3) of size 4600 mm (L) × 900 mm (W) × 900 mm (H), comprising c-frame structure 60×30×2 mm thick hollow pipe, duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including 750 mm wide storage module with one drawer and two shutters, single piece molded PP sink (600 (L)×450(W)×315(D) mm), three way water tap with swan neck spout, PP adjustable pegboard with 46 nos pegs (600×600 mm), double outlet eye wash with SS braided flexible , three tier reagent rack in GI construction, GI powder coated electrical raceway with 6/16 Amp sockets and 16 Amp one way switches, filler panels in GI construct and closed panels, all complete as per specifications and direction of Engineer-in-Charge. | 1 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054