- Home
- >
- Tender
- >
- Jammu and Kashmir Tender
- >
- Department of SHRI MATA VAISHNO DEVI UNIVERSITY
- >
NTID 42923284
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply And Fixing Of Civil Dep in Talwara - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply And Fixing Of Civil Dep" in Talwara, India.
SHRI MATA VAISHNO DEVI UNIVERSITY
Talwara, Jammu and Kashmir, India
NTID 42923284
- Opening Date : Wed 10th December, 2025
- Closing Date : Tue 9th December, 2025
- ₹ 9523246.00
- NTID 42923284
Key Values: Document Cost: 1500.00 | EMD: 191000.00 | Estimated Cost: 9523246.00
Tender Description
Supply And Fixing Of Civil Department Laboratory Furniture Of New Academic Block At Smvd University, Kakryal, Katra
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
191000.00 -
Document Cost
1500.00 -
Estimated Cost
9523246.00
BOQ Items Total Items : 22 | Total Qty : 284
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supplying & placing of Lab benches with followings specifications:(10770x4600)Wx750Dx900Dmm) Lab made up of C-frame understructure. All sheet metal items shall be of CRCA sheet double skin pass, Thickness of Frame 0.8 mm Cabinets body (casing material CRCA Sheet Side Cover 0.8 mm, as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of -5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered 4 mm thick Neoprene rubber at the bottom. All steel frame-work is should be pre-treated with superior epoxy powder coated finish. Lab Under Storage 600(W)mm x 530(D)mm x 675mm(H) Providing and fixing understorages of Size 600mm W x 530mm D x 674mm H should be supplied with1 Drawer & 2 Shutters . Doors should be assembled with Hinges made up of SS 304, Zero Crank hinge. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 0.8 mm CRCA Sheet construction Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8 mm thick. Handle polypropylene Recessed-Type. Lock facility with 180 and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Telescopy Channel : 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Lab - Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet Providing and fixing Sink Units which shall comprises of Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet as per following: Standard bowl size shall 600mm(L) x 400mm(W) x 300mm(D). Water faucet and valve bodies shall be cast red brass alloy or bronze forgings, all fittings shall be powder plated. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Coating to be glossy epoxy fusion bond. The Faucet shall be fixed to the existing water outlet by providing PVC connection with brass unions of required length. Lab Tables - Electric Trunking Providing , placing of Electrical Trunk Size - 230mm x86mm x90 mm Including 6 Module Plate. The electrical trunking used for electrical switches and sockets, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. The front surface that houses the electrical points should have a slope. Dimensions Tolerance +/-- 20 mm. | 1 | each |
| 2 | Supplying & placing of Lab benches with followings specifications: (6510Wx750Dx900Dmm) Lab made up of C-frame understructure. All sheet metal items shall be of CRCA sheet double skin pass, Thickness of Frame 0.8 mm Cabinets body (casing material CRCA Sheet Side Cover 0.8 mm, as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of -5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered 4 mm thick Neoprene rubber at the bottom. All steel frame-work is should be pre-treated with superior epoxy powder coated finish. Lab Under Storage 600(W)mm x 530(D)mm x 675mm(H) Providing and fixing understorages of Size 600mm W x 530mm D x 674mm H should be supplied with1 Drawer & 2 Shutters . Doors should be assembled with Hinges made up of SS 304, Zero Crank hinge. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 0.8 mm CRCA Sheet construction Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8 mm thick. Handle polypropylene Recessed-Type. Lock facility with 180 and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Telescopy Channel : 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Lab - Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet Providing and fixing Sink Units which shall comprises of Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet as per following: Standard bowl size shall 600mm(L) x 400mm(W) x 300mm(D). Water faucet and valve bodies shall be cast red brass alloy or bronze forgings, all fittings shall be powder plated. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Coating to be glossy epoxy fusion bond. The Faucet shall be fixed to the existing water outlet by providing PVC connection with brass unions of required length. Lab Tables - Electric Trunking Providing , placing of Electrical Trunk Size - 230mm x86mm x90 mm Including 6 Module Plate. The electrical trunking used for electrical switches and sockets, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. The front surface that houses the electrical points should have a slope. Dimensions Tolerance +/- 20 mm. | 1 | each |
| 3 | Supplying & placing of Island benches with followings specifications: (5950Wx1500Dx900Hmm) Lab made up of C-frame understructure. All sheet metal items shall be of CRCA sheet double skin pass, Thickness of Frame 0.8 mm Cabinets body (casing material CRCA Sheet Side Cover 0.8 mm, as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of -5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered 4 mm thick Neoprene rubber at the bottom. All steel frame-work is should be pre-treated with superior epoxy powder coated finish. Lab Under Storage 600(W)mm x 530(D)mm x 675mm(H) Providing and fixing understorages of Size 600mm W x 530mm D x 674mm H should be supplied with1 Drawer & 2 Shutters . Doors should be assembled with Hinges made up of SS 304, Zero Crank hinge. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 0.8 mm CRCA Sheet construction Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8 mm thick. Handle polypropylene Recessed-Type. Lock facility with 180 and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Telescopy Channel : 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Lab - Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet Providing and fixing Sink Units which shall comprises of Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet as per following: Standard bowl size shall 600mm(L) x 400mm(W) x 300mm(D). Water faucet and valve bodies shall be cast red brass alloy or bronze forgings, all fittings shall be powder plated. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Coating to be glossy epoxy fusion bond. The Faucet shall be fixed to the existing water outlet by providing PVC connection with brass unions of required length. Lab - Reagent Racks Providing and fixing 2 Tier Reagent Racks of size 1200mm(L) x 300mm(W) x 680mm(H). Reagent Racks shall be complete modular design consisting of 2 stage horizontal storage shelves made of 1.6 mm thick frame. Shelf : Fixed-Type reagent shelves have 1.6mm thickness consisting of 2 stage horizontal storage shelves made of 1.6 mm thick frame of CRCA MS sheet. All the members are knock down and can be restructured. The metal part cutout shall be of 1.00mm thickness. Regent Rack having electrical switches 16A/6A & sockets 16A/6A with six module plates. Dimensions Tolerance +/- 20 mm. | 2 | each |
| 4 | Providing and Placing in position Ht. Adjustable Stool with Back. The seat shall be made up of 1.2 0.1cm thick flat plywood and with moulded Polyurethane foam and are upholstered with replaceable synthetic leather covers. The dimensions of Seat shall be Diameter 40.0 cm and Adjustments are 360 Revolving type. The back foam shall be designed with contoured Lumbar support for extra comfort. The upholstery shall be available in synthetic leather. The dimensions of Back shall be 45.0 cm (W) covered with polyurethane foam. The HR polyurethane Foam shall be moulded with density = 40 +/-2 kg/m3. The five-prong pedestal shall be fabricated from 0.2 0.02 cm thick HR sheet ( IS : DD 1079/ HR ), Powder coated ( DFT 40-60 microns ). The twin wheel castors shall be injection moulded in Black Nylon. Dimensions Tolerance +/- 20 mm. (SIZE: DIA 400mm) | 220 | each |
| 5 | Providing, supplying and placing Chemical Almirah. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H). The Almirah shall be supplied with 2 nos. of full glass doors with 4 nos. of adjustable shelves i.e. 5 loading compartments. The glass used shall be 4mm thick clear. The shelves shall have chemical resitant and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel, shelf and door shall be made of high yield strength 0.8mm thick GI Sheet. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick. Chemical Storage shall have Ventilated air system. | 5 | each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054