- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 43861813
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding Expertsub Head- Providing And Layin in Mandi - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for " sub Head- Providing And Layin" in Mandi, India.
Public Works Department
Mandi, Himachal Pradesh, India
NTID 43861813
- Opening Date : Thu 12th February, 2026
- Closing Date : Wed 11th February, 2026
- ₹ 1997750.00
- NTID 43861813
Key Values: Document Cost: 500.00 | EMD: 40000.00 | Estimated Cost: 1997750.00
Tender Description
(sub Head- Providing And Laying Built-up Spray Grout, Take Coat, Bituminous Concrete 25mm Thick And Thermoplastic Strip In Km. 0/000 To 1/500).
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
40000.00 -
Document Cost
500.00 -
Estimated Cost
1997750.00
BOQ Items Total Items : 4 | Total Qty : 4971.01
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing, laying, spreading and rolling of built-up spray grout layer using bitumen VG-30 (thirty) over prepared base by manual means consisting of a Single layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 37.5 mm (thirty seven point five millimetre) as per Technical Specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive all taxes levy by the government time to time including GST. | 251.63 | Per square metre |
| 2 | Providing and applying tack coat with bitumen emulsion confirming to IS:8887 (RS-1) using emulsion pressure distributor including preparing the surface and cleaning with mechnical broom on bituminous surface @ 0.275 kg/sqm (at the rate of zero point two seven five kilogramme per square metre) as per technical specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive all taxes levy by the government time to time including GST. | 4575.00 | Per square metre |
| 3 | Providing and Laying bituminous concrete 30mm ( thirty millimetre) compacted thickness with bitumen of grade VG-30 (Thirty) @ 5.50% (at the rate of five point five per cent) (percentage by weight of total mix) and lime filler @ 3% (three percentage) (percentage by weight of aggregatre) prepared in Batch Type Hot Mix Plant of 100-120 (Hundred - one hundred twenty) TPH capacity by using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required garde, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive all taxes levy by the government time to time including GST. | 114.38 | Per cubic metre |
| 4 | Road marking with hot aplied thermoplatic compound with relectorising glass baord on bitumenous surface. Profviding and laying of hot applied thermoplastic compound 2.5mm (two point five milimeter) thick including reflectorising glass beads @ 250 gms/sqm (two hundred fifty grammes per square meter) area thickness of 2.5mm (two point five milimeter) is execlusive of surface applied glass beads as per IRC:35. The finished surface to be uniform and free from streaks and holes as per PWD specification and as directed by the Engineer-In-Charge including carriage of material with in all leads and lifts complete in all respec.The rate is inclusive all taxes levy by the government time to time including GST. | 30.00 | Per square metre |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054