- Home
- >
- Tender
- >
- Rajasthan Tender
- >
- Department of Military Engineer Services
- >
NTID 46350909
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Spl Repair Repl in NASIRABAD - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Spl Repair Repl" in NASIRABAD, India.
- Opening Date : Fri 11th September, 2026
- Closing Date : Wed 9th September, 2026
- ₹ 0.00
- NTID 46350909
Key Values: Document Cost: 500.00 | EMD: 68000.00 | Estimated Cost: 0.00
Tender Description
Corrigendum : Spl Repair/ Replacement Of Acs, Desert Cooler, Water Cooler Against Ber Under Ge Nasirabad Mil Stn And Provn Of 02 X High Mast Lights In South Campus Of Nasirabad Mil Stn Under Ge Nasirabad
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
68000.00 -
Document Cost
500.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 19 | Total Qty : 640.84
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Material & Labour for Supply, erecting and fixing in true vertical position, 15 Mtr High galvanized mast light system (as per PLG 07 of ILP UK technical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062) consisting of totally hot dip galvanised by piece-wise single dipped method high mast, lantern carriage suitable for up to 9 no’s luminaries of 200W each with welded arm (excluding luminaires), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self-sustaining winch, integral power tool accessible from door with padlocking arrangement (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, Stainless steel 6 mm dia. wire ropes (AISI 316, 7 / 19 construction 3 no. rope for lantern carriage & 2 no. rope for winch assembly ) foundation bolt, torque limiter, PR insulated PCP sheathed 5 core x 2.5 Sq.mm trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135.etc. Height of High mast - 15 Mtrs | 2 | EACH |
| 2 | The technical specification for the High Mast Lighting System are here as given under:- 1. Material Construction - IS 2062 grade E350 / BS EN 10025 or Equivalent having minimum yield strength of 350 N/Sq. mm 2. Top/ Bottom (Diameter of High Mast) - 150/410 MM 3. Nos. of Section of Mast – 2 4. Thickness of Section - 3/4 MM 5. Thickness of Base Plate (Min.) - 25 MM 6. PCD of Foundation - 490 MM 7. No. of Foundation Bolts - 8 Nos. 8. Wire Rope (Nos./Thickness) - 3/6mm, AISI 304 9. Input Supply/Power tool /Torque Limiter - 415V, 3 Phase/ (Reversible with Plate arrangement for adjusting the tension in the coupling chain between motor & winch/Mechanical 10. Motor - 1.0 HP 11. Trailing Cable ( Conductor/Type/Size) - Copper/EPR insulated PCP sheathed cotton braided/5CX4.0 sqmm | ||
| 3 | 12. Flood Light 200W should be made of single piece PDC Housing with lens, & should have inbuilt potted driver with LED Drive current ≤750 MA & should be tested in in-house NABL accredited lab having total system lumens ≥26000 Lumens with system efficacy ≥130 LPW. Note :- (a) Complete RCC foundation of specification and size as specified by OEM for High Mast Light Pole is deemed to be included in the unit quoted rate. (b) High Mast Light technical detail i.e. TDS, Design, Drawings etc. needs to be submitted before make approval. | ||
| 4 | M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed. | 4 | EACH JOB |
| 5 | S & F galvanised iron strip 32 x 6 mm burried in ground /passing through pipe complete all as specified and directed. | 100 | RM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054