- Home
- >
- Tender
- >
- Jammu and Kashmir Tender
- >
- Department of Military Engineer Services
- >
NTID 44602839
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSpecial Repair To Epoxy Coatin in Akhnoor - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Special Repair To Epoxy Coatin" in Akhnoor, India.
Military Engineer Services
Akhnoor, Jammu and Kashmir, India
NTID 44602839
- Opening Date : Wed 22nd April, 2026
- Closing Date : Mon 20th April, 2026
- ₹ 8508075.00
- NTID 44602839
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
153000.00 -
Document Cost
1000.00 -
Estimated Cost
8508075.00
BOQ Items Total Items : 3 | Total Qty : 7700
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Taking down/Removing of existing epoxy flooring from the mother concrete slabs and removing material from the site complete all as directed by E-in-Charge | 3750.00 | SQM |
| 2 | Providing and applying 4 mm thick epoxy polyurethane self-smoothing flooring on vacuum dewatered / Heavy duty or other flooring min M25 grade as under:- (i) Carry out surface preparation including grinding / scarification / light shot blasting of concrete surface, proper cleaning, removing of loose mortar, paint residuals, curing compound residues, repairing of floor cracks and dents. (ii) Apply a Primer coat of epoxy prime FloArm PES followed by 3mm thick screed with FloArm ESF 4 having compressive strength of 50 Mpa, tensile strength of 16 MPa as per ASTM D638, Flexural strength of 20 MPa as per ASTM D790,tensile strength of 16 MPa as per IS 9162. Then after 12 hours of screeding when screed get dried,Providing and laying the 1mm epoxy polyuethane with Floarm Top EPU1 having compressive strenth 50 MPa as per IS 9162, Flexure strength 25 MPa after 7day(IS9162), Gloss to be applied in desired colour and finish. Note : This shall be done using slow speed drill and poured on as per manufacturer's specification. Then level the material using serrated trowel and the same with spiked nylon roller to remove slight trowel marks and entrapped air from the material. (iii) Anchorage grooves should be cut to a minimum depth and width of 2mmX2mm the flooring thickness to be laid at the edges, day joints, up stands, drains, doorway including all tools and tackles as per manufacturer's specifications and at regular points across the floor etc. | 3750.00 | SQM |
| 3 | Material & Labour for yellow lining (width exc 100mm but n.exc 200mm) with aromatic Polyurethane Coating as per manufacturer specification. | 200.00 | RM |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054