- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 43233942
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSpecial Repair Of Rsm Chauraha in Bijnor - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Special Repair Of Rsm Chauraha" in Bijnor, India.
Public Works Department
Bijnor, Uttar Pradesh, India
NTID 43233942
- Opening Date : Thu 25th December, 2025
- Closing Date : Thu 25th December, 2025
- ₹ 3470000.00
- NTID 43233942
Key Values: Document Cost: 2354.00 | EMD: 347000.00 | Estimated Cost: 3470000.00
Tender Description
Special Repair Of Rsm Chauraha To Alawalpur To Chak Moh Nagar Road
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
347000.00 -
Document Cost
2354.00 -
Estimated Cost
3470000.00
BOQ Items Total Items : 8 | Total Qty : 2428.3
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | W.B.M. G-3 (22.4-53 mm stone ballast) Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (Including labour cess, Royalty but excluding GST.) | 66.00 | Cum |
| 2 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, Using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Including labour cess, Royalty but excluding GST.) | 121.00 | Cum |
| 3 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embakment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. As per MORD Specification Sr. No. 3.5(ii). (Including labour cess but excluding GST.) | 220.00 | Cum |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Including labour cess, Royalty but excluding GST.) | 185.00 | Cum |
| 5 | Supply & fitting 80 mm thick Precast cement concerete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P. cement, smooth high gloss finish, skid reditant. Manufactured from rubber moulds through vibro-compression machanism. the compressive strength of concrere paver block shall not be less than 30MPA (M-30) and weight 5kg per no confirming to IS:15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P taxes etc required for proper completion of the work as directed by engineer-in-charge. as per Additional item road furnishing work no. 5(2). Red Color. (Including labour cess but excluding GST.) | 1485.00 | Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054