Tender for Military Engineer Services - NTID 30011816
Military Engineer Services
Hyderabad, Telangana, India
NTID 30011816
- Opening Date : Sat 31st December, 2022
- Closing Date : Thu 29th December, 2022
- ₹ 2500000.00
- NTID 30011816
Repairs/ Renewal To External Electrification In Domestic And Admin Area At Afa Hyderabad
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
500.00 -
Estimated Cost
2500000.00
BOQ Items Total Items : 88 | Total Qty : 21152.5
# | Item | Quantity | Units |
---|---|---|---|
1 | Disconnecting and taking out existing ACBs from housing and cleaning, rubbing and overhauling the mechanical parts and making serviceable of Local/Remote electrical operation of the panel incl Greasing, Oiling , replacement of UNSV Trip coil, Breaker System ,Gear Pinion, roller, UV coil / shunt coil witch and re-assembling the same, Servicing of 440V in door ACB 630A to1600A capacity, fixed type/ MDO/ EDO checking of quality of Air interrupter, insulation resistances, static contact resistance, Testing (IR value, ratio test, polarity test) , connection testing and calibration of relay including all other functional tests of the ACB, panel complete all as specified and as directed. | 1.00 | Each job |
2 | Design, supply, erection, testing and commissioning of outdoor type LT feeder pillar box platform mounted (to be mounted on the P.C.C. brick pedestal), suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating not less then 400 amps, Spreader link to incoming/outgoing MCCB for termination of incoming/outgoing cable and Aluminium connecting bars of suitable size (R-Y-B-N) for outgoing cables, duly fabricated in a CPRI approved / certified factory having modern fabrication and testing facility which includes at least seven (07) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032. The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel angle (50x50x5mm) legs of length 30 cm at bottom, suitable for mounting on the pedestal, The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings :- | 1.00 | Job |
3 | (a) MCCB, 4 Pole, 400 Amps, Breaking Capacity 35 KA, Adjustable type (100% - 80%) - 01 No. (Incoming) | ||
4 | (b) MCCB, 4 Pole, 250 Amps, Breaking Capacity 25 KA, Adjustable type (100% - 80%) - 01 No. (Outing) | ||
5 | (c) MCCB, 4 Pole, 125 Amps, Breaking Capacity 35 KA, Adjustable type (100% - 80%) - 02 No. (Outgoing) |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane