- Home
- >
- Tender
- >
- Gujarat Tender
- >
- Department of NATIONAL INSTITUTE OF DESIGN
- >
NTID 45441996
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowRepair Water Proofing Treatm in Ahmedabad - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair Water Proofing Treatm" in Ahmedabad, India.
- Opening Date : Refer Documents
- Closing Date : Tue 16th June, 2026
- ₹ 1675800.00
- NTID 45441996
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
34000.00 -
Document Cost
1000.00 -
Estimated Cost
1675800.00
BOQ Items Total Items : 136 | Total Qty : 14416
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Construction joint treatment at Terrace of Proto Type Area and FID Studio Area by providing and applying 2 coats of liquid applied waterproofing membrane of 1.68 m width of pidilite/asian paint or equivalent brand after applying a coat of bitumen primer after removal of existing membrane to required width and filling the cracks using polymer modified mortar/Crack X Paste etc and forming cement mortar coving (fillet) at column locations and 12mm to 15 mm thick plaster with cement mortar 1:4 using integral waterproofing compound wherever compound and preparation of surfaces for applying bitumen primer, 2nd coat of membrane to be applied after 6-8 hours and perpendicular to 1st coat. Note: Dr. Fixit Prime Seal Primer or equivalent approved primer followed by application of 2 coats of Dr. Fixit Roofseal Ultra Waterbound PU Coating incorporating 45GSM reinforcement as a sandwich layer between coats of membrane is to be applied. A semicircular PVC pipe of required diameter for covering the joint treatment done is to be provided. All debris is to be removed outside NID campus. | 32.000 | Rmt |
| 2 | Construction joint treatment at Terrace of Textile Area by providing and applying 2 coats of liquid applied waterproofing membrane of 1.56 m width of pidilite/asian paint or equivalent brand after applying a coat of bitumen primer after removal of existing L-angle joints and other material in adjoining area up to mother RCC surfaces and filling the cracks using polymer modified mortar/Crack X Paste etc and constructing brick masonry box enclosures around existing cable tray including cement plaster etc with cement mortar 1:4 using integral waterproofing compound wherever required and carrying out bore hole packing using non-shrink grouts including filling joints with suitable sealant and providing and laying waterproofing brick bats coba of 40-60 mm thick 1.0 metre width with 1:2:4 (cement:sand :brick bats) concrete using integral water proofing compound and preparation of surfaces for applying bitumen primer, 2nd coat of membrane to be applied after 6-8 hours and perpendicular to 1st coat. Note: Dr. Fixit Prime Seal Primer or equivalent approved primer followed by application of 2 coats of Dr. Fixit Roofseal Ultra Waterbound PU Coating incorporating 45GSM reinforcement as a sandwich layer between coats of membrane is to be applied. A semicircular PVC pipe of required diameter for covering the joint treatment done is to be provided.All debris is to be removed outside NID campus. | 16.000 | Rmt |
| 3 | Expansion Joint treatment at Terrace of Foundation Area starting with surface preparation including cleaning and removal of existing membrane and filing the cracks using polymer modified mortar (PMM), and levelling with cement sand mortar and grout as required, followed by providing and installing HD 100 filler board / backer rod in 50 mm wide joint and application of polyurethane sealant (50 mm 25 mm). Applying one coat of approved bituminous primer thereafter two coats of liquid applied waterproofing membrane of pidilite/asian paint or equivalent brand over 1.68 m width with 48 hours interval in between coats and 2nd coats to be applied in perpendicular direction, including sand sprinkling over final coat while tacky for bonding. Further, providing and applying elastomeric expansion joint tape (200 mm wide 2 mm thick) over joint and adjoining surfaces with proper anchorage, followed by providing and fixing 300 mm wide, 1 mm thick GI / aluminium sheet over the joint with screws ensuring overlap and continuity. Providing and laying 4060 GSM non-woven geotextile over treated area and laying IPS in (CC 1:2:4) / India Waterproofing - BBCC protective layer in CC 1:6 on both sides of the joint as per site condition.Note: Dr. Fixit Prime Seal Primer or equivalent approved primer followed by application of 2 coats of Dr. Fixit Roofseal Ultra Waterbound PU Coating incorporating 45GSM reinforcement as a sandwich layer between coats of membrane is to be applied. A semicircular PVC pipe of required diameter for covering the joint treatment done is to be provided. All debris is to be removed outside NID campus. | 16.000 | Rmt |
| 4 | Waterproofing treatment at Terrace of white house by providing and applying 2 coats of liquid applied waterproofing membrane of Pidilite/Asian paint or equivalent brand after applying a coat of bitumen primer after removal of existing membrane and filling the cracks using polymer modified mortar/Crack X Paste etc. and carrying out bore hole packing using non-shrink cementitious grouts including filling joints with suitable sealant and preparation of surfaces for applying bitumen primer, 2nd coat of membrane to be applied after 6-8 hours and perpendicular to 1st coat. Note: Dr. Fixit Prime Seal Primer or equivalent approved primer followed by application of 2 coats of Dr. Fixit Roof seal Ultra Water bound PU Coating incorporating 45 GSM reinforcement as a sandwich layer between coats of membrane is to be applied. All debris is to be removed outside NID campus. | 360.000 | Sqm |
| 5 | Construction joint treatment at Terrace of Proto Type Area and FID Studio Area by providing and applying 2 coats of liquid applied waterproofing membrane of 1.68 m width of pidilite/asian paint or equivalent brand after applying a coat of bitumen primer after removal of existing membrane to required width and filling the cracks using polymer modified mortar/Crack X Paste etc and forming cement mortar coving (fillet) at column locations and 12mm to 15 mm thick plaster with cement mortar 1:4 using integral waterproofing compound wherever compound and preparation of surfaces for applying bitumen primer, 2nd coat of membrane to be applied after 6-8 hours and perpendicular to 1st coat. Note: Dr. Fixit Prime Seal Primer or equivalent approved primer followed by application of 2 coats of Dr. Fixit Roofseal Ultra Waterbound PU Coating incorporating 45GSM reinforcement as a sandwich layer between coats of membrane is to be applied. A semicircular PVC pipe of required diameter for covering the joint treatment done is to be provided. All debris is to be removed outside NID campus. | 32.000 | Rmt |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054