- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of Military Engineer Services
- >
NTID 45561764
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRepair To Joint Filling And Ot in Kalaikunda - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair To Joint Filling And Ot" in Kalaikunda, India.
Military Engineer Services
Kalaikunda, West Bengal, India
NTID 45561764
- Opening Date : Tue 7th July, 2026
- Closing Date : Mon 6th July, 2026
- ₹ 4500000.00
- NTID 45561764
Key Values: Document Cost: 500.00 | EMD: 90000.00 | Estimated Cost: 4500000.00
Tender Description
Repair To Joint Filling And Other Connected Wks At Main Taxi Track, Orp And Certain Other Air Craft Movement Area At Af Stn Kalaikunda
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
90000.00 -
Document Cost
500.00 -
Estimated Cost
4500000.00
BOQ Items Total Items : 16 | Total Qty : 2559
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | M & L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 6 to 10 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed. Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make. (ii) Masking tape will be used to avoid accidental seepage/spreading of sealant. (iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost. (iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up. (v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics. | 20.00 | 10RM |
| 2 | All as per item No 1.00 here-in-before but, size of joint is 11 to 15 mm wide complete all as specified and as directed. | 147.00 | 10RM |
| 3 | All as per item No 1.00 here-in-before but, size of joint is 16 to 20 mm wide complete all as specified and as directed. | 214.00 | 10RM |
| 4 | M & L for racking out of old existing joint sealant compound (Any type and any sealant compound) and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant, thereafter filled with pre-moulded 25mm thick Compressible polyethylene closed cell type filler board as specified , over it filled with , medium density, cross linked polyethylene foam backup rod of suitable size for complete length of the joint for the joint width 21 to 25 mm, over it to be finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and directed. Note: - (i) Minimum depth of sealant will be as per respective manufacturers instruction. Sealant and primer will be of same make. (ii) Masking tape will be used to avoid accidental seepage/spreading of sealant. (iii) Bidders attention is invited to the depth of pavement joint required to be cut,in case of extra cutting biderrs needs to make good with suitable filler as directed by Engr-In-Charge/Manufacturer at his own cost. (iv) Filling of joints to be done 2 to3 mm recessed during summer and in winter it should be filled up to top up. (v) Fly wheel,spatula,triangular pallet Knife etc. to be used to maintain the recess and to give aesthetics. | 588.00 | 10RM |
| 5 | All as per item No 4.00 here-in-before but, size of joint is 26 to 30 mm wide complete all as specified and as directed. | 450.00 | 10RM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054