- Home
- >
- Tender
- >
- Rajasthan Tender
- >
- Department of Military Engineer Services
- >
NTID 42734338
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRepair To Flexible Rigid Surfa in Jodhpur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair To Flexible Rigid Surfa" in Jodhpur, India.
- Opening Date : Sat 13th December, 2025
- Closing Date : Thu 11th December, 2025
- ₹ 5789000.00
- NTID 42734338
Key Values: Document Cost: 1000.00 | EMD: 112000.00 | Estimated Cost: 5789000.00
Tender Description
Repair To Flexible Rigid Surfaces Of Runway Including Application Of Pme Etc At Afs Jodhpur.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
112000.00 -
Document Cost
1000.00 -
Estimated Cost
5789000.00
BOQ Items Total Items : 22 | Total Qty : 259079.5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Material and Labour Chipping and/or neatly Cutting of existing loose concrete at cracks on Runway/Taxi track/ pavement by using diamond cutter. Cutting of cracked portion shall not be less than 100 mm wide and 45 mm deep. Cleaning the dirt and all loose material fanned with air blower and air blasting the cleaned surface applying proprietary primer on surfaces to obtained tack and finally filling in Elastomeric Concrete, (Mix shall be prepared as per manufacturer) to obtained a true surface and finally tooling the set surface with hand tools complete all as specified and directed. Note :- (i) The rate shall be include for providing masking tape at joints and formwork required if any at spalled joints edges. (ii) The quoted rate deemed to be included for making good to disturbed joint filling around the area where material is applied. (iii) All material shall only be procured directly from manufacturer. | 4.50 | Sqm |
| 2 | Material and Labour Cutting existing loose patches / spalled edges of concrete pavement in square / rectangular/ triangular shape to a depth not less than 25mm removing debris out side MD land sweeping the patches with broom, cleaning with compressed air and applying epoxy resin mortar (proportion as specified) incl necessary form work for sides of joints, sprinkle , a thin layer of dust free fine sand (QUARTS SAND 10 No) and applying a coat on top of surface with epoxy resin primer @ 0.45 Kg/Sqm and finally filling the joints with sealing compound complete all as spd and as directed by Engr-in-Charge (Sealing of joint shall be measured under respective item separately). | 5.00 | Sqm |
| 3 | M&L for repair to potholes/patches on runway operating surface up to 100mm deep including cutting of existing flexible concrete surface in vertical to making the potholes in square/rectangle shape & size. Remove debris outside MD land and cleaning the dust with air blower, the cleaned and dry surface making good by applying cold emulsion and filled with instant road repairing bituminous premix in hot condition including well rolled and compacted with 8 to 12 tonne power roller to required camber and gradient including necessary arrangement for working in night conditions and all required T&Ps complete all as specified and directed. | 15.00 | Sqm |
| 4 | M&L for raking out sealing compound from existing expansion joints of dimension 25 mm to 30 mm wide and 45 mm deep, removing the debris from site by sweeping the concrete surface with brooms, cleaning with compressed air, treating sides and bottom of the joints with primer as per manufacturer's directions and filled with preformed closed cell polyethylene backup rod/strip of 25-32 mm dia, sealing with pitch free polyurethane grey sealant (minimum depth of sealant above backup rod shall be 10 mm) conforming to BS-5212 (Type FB) and applying masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after application of sealant complete all as specified and directed. | 300.00 | X RM |
| 5 | Ditto all as per item No 4 above but construction/dummy joints of dimension 16 to 24 mm wide and 40 mm deep and backup rod/strip of 16-25 mm complete all as specified and directed. | 600.00 | X RM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054