- Home
- >
- Tender
- >
- Punjab Tender
- >
- Department of Military Engineer Services
- >
NTID 45915359
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRepair To Certain Roads At Afs in Abohar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair To Certain Roads At Afs" in Abohar, India.
- Opening Date : Wed 5th August, 2026
- Closing Date : Mon 3rd August, 2026
- ₹ 1000000.00
- NTID 45915359
Key Values: Document Cost: 500.00 | EMD: 20000.00 | Estimated Cost: 1000000.00
Tender Description
Repair To Certain Roads At Afs Abohar Under Ge (af) Bhisiana
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
20000.00 -
Document Cost
500.00 -
Estimated Cost
1000000.00
BOQ Items Total Items : 10 | Total Qty : 761.5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Material & Labour for repair to pot holes any depth not exceeding 1.0 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using bituminous primer VG-10 @ 5Kg per 10 Sqm, putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 cum of sand), again well rammed ( including supply of premix binder and sand) depth of potholes not exceeding 30mm complete all as specified and directed by Engr-in-Charge. Note :- (i) Pot holes shall be marked by Engineer-in-charge before commencement of work and same shall be entered in MB after making good and before laying of bituminous premix carpet. (ii) GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item. | 1.50 | XSqm |
| 2 | Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt etc from black top surface with and including applying evenly a premix /tack coat with bitumen grade VG-10 @ 5Kg per 10 Sqm complete all as specified and as directed by Engineer in Charge. Note : This item shall be used only where BM is in patches and to be covered by top layer after 48 hours. | 265.00 | X Sqm |
| 3 | Material and labour for preparation of unsurfaced water bound macadam by brushing with wire brushes for removing cracked mud etc. sweeping with brooms and finally cleaned the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumin VG-10@ 7.5Kg per 10 Sqm on bituminous surface complete all as specified and directed by Engr-in-Charge. | 16.00 | X Sqm |
| 4 | Material and labour for premixed bituminous macadam laid/rolled with power roller 8 to 12 tone roller and compacted to required gradient & camber (consolidated thickness 50mm) and binder 4% (Viscocity grade Bitumen VG-30) by weight of total mix complete all as specified laid over priming /Tack coat. Note:- Preparing of surfaces and and primig coat will be measured and paid for separately under subsequent item. | 8.00 | Cum |
| 5 | Providing and laying Premix Bituminous semi dense asphaltic Concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2 with mixing of agrgregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from the plant to work site by tippers and laying with mechanical paver finisher and as per approved mix and rolled & compacted to required camber and gradient with vibromatic roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed by Engr-in-Charge. Notes : (i) The contractor shall quotes the rate against this Item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Zonal laboratory/ Govt Engineering Colleges/ IIT/NIT/CTL or any E-in-C/ MES approved lab for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the GE for approval. Any variation in binder content on minus side shall be adjusted @ Rs 52/kg of binder and no adjustment shall be made on plus side. (ii) Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate. (iii) After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. | 265.00 | X Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054