- Home
- >
- Tender
- >
- Madhya Pradesh Tender
- >
- Department of Military Engineer Services
- >
NTID 44790865
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Repair Maint Of in MHOW - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Repair Maint Of " in MHOW, India.
Military Engineer Services
MHOW, Madhya Pradesh, India
NTID 44790865
- Opening Date : Thu 7th May, 2026
- Closing Date : Tue 5th May, 2026
- ₹ 1000000.00
- NTID 44790865
Key Values: Document Cost: 500.00 | EMD: 20000.00 | Estimated Cost: 1000000.00
Tender Description
Corrigendum : Repair Maint Of External Electric Lt Infrastructure Alongwith Connected Items Under Ge Mis Mhow - Repair / Maint Of External Electric Lt Infrastructure Alongwith Connected Items Under Ge (mis) Mhow
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
20000.00 -
Document Cost
500.00 -
Estimated Cost
1000000.00
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum |
BOQ Items Total Items : 48 | Total Qty : 1742
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Repairing/overhauling of existing outdoor-type LT panel boards/feeder pillar boxes of any size/type, fixed on PCC blocks, including cleaning with compressed air; tightening of all electrical connections to bus bars and switchgear; refixing of loose doors with proper fixing and locking arrangements, including necessary welding work as required; replacement of worn-out/burnt/rusted/loose lugs, door locks, nuts, bolts, hinges, washers, and internal wiring with suitable size (minimum 1.5 sq mm) PVC insulated copper conductor wire; repair to PCC work as required at site; and including disconnection of all cables from the bus bar, insulating the naked portions of Al/Cu conductors, and reconnecting the same after repair of the panel, along with proper connection of the main earth wire/lead to the panel body using lugs, complete all as specified and directed. | 15.00 | Each Job |
| 2 | Repairing/overhauling of existing indoor-type LT panel boards/bus bars/V-TPN DBs of any size/type, fixed on building walls, including cleaning with compressed air; tightening of all electrical connections to bus bars and switchgear; refixing of loose doors with proper fixing and locking arrangements, including necessary welding work as required; replacement of worn-out/burnt/rusted/loose lugs, door locks, nuts, bolts, hinges, washers, and internal wiring with suitable size (minimum 1.5 sq mm) PVC insulated copper conductor wire; repair to plaster work as required at site; and including disconnection of all cables/sub-mains from the bus bar, insulating the naked portions of Al/Cu conductors, and reconnecting the same after repair of the panel, along with proper connection of the main earth wire/lead to the panel body using lugs, complete all as specified and directed. | 8.00 | Each Job |
| 3 | M&L for preparing doors of existing LT panels/feeder pillar boxes with locking arrangements and gaskets, made of 2 mm thick CRCA sheet, including hinges and necessary welding work, complete all as specified and directed. | 6.00 | Sqm |
| 4 | Checking and identifying defects/fault points in LT/HT cables using a cable fault locator machine or by manual excavation, including taking out bricks from the trench up to the fault point along the cable route and re-laying the same using old bricks/sand, including refilling and making good the surface after rectification of the defect, complete all as specified and directed, for the following cable length:- (a) 0 -200 m | 10.00 | Each Job |
| 5 | (b) 0 - 350 m Note for item No 4.00 and 4.01: The cable fault locator machine, along with all T&P required for identifying the fault location, shall be arranged by the contractor, and the cost thereof shall be deemed to be included in the unit rate for fault detection using the machine or manually as directed by the Engr-in-Charge . | 15.00 | Each Job |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054