- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of HIMACHAL PRADESH STATE ELECTRICITY BOARD
- >
NTID 44553326
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRepair And Providing Hvof Coat in Kinnaur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair And Providing Hvof Coat" in Kinnaur, India.
HIMACHAL PRADESH STATE ELECTRICITY BOARD
Kinnaur, Himachal Pradesh, India
NTID 44553326
- Opening Date : Fri 27th March, 2026
- Closing Date : Fri 27th March, 2026
- ₹ 248980.00
- NTID 44553326
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 1 | Total Qty : 1
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Repair and providing HVOF Coating on (1) one No. Linear and (2) one No. Nozzle of 50mm Air Release/Decompression valve of 3x40MW Bhaba HEP. Prior to start of work existing HVOF coating will have to be removed from the surface by process of sand blasting, under cut tip 10 mm thickness of liners and spares. After repair, spears should fit properly on needle stem of nozzle assembly. Remove all the pitting and damaged portion by undercut, grinding, and then deposition through build-up by specified electrodes (65410 NiMO of superior quality). Providing HVOF Coating of 300 m (microns) on 01 no. Liner and 01 no. Spear Tips of 3x40MW Bhaba HEP. The HVOF system to be used should be capable of spraying Tungsten Carbide powder with following properties: Porosity less than 1% Bond strength of more than 10,000 psi Surface finish: Better than 6Ra The coating thickness shall be 300-350 microns (not less than 300 microns) Hardness of more than 1100 VHN The bidder should use Tungsten Carbide Powder with -A typical composition of WC-86% Co-10% and Cr-4% by weight. Test certificate to be furnished. | 1 | set |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054