- Home
- >
- Tender
- >
- Odisha Tender
- >
- Department of Department Of Water Resources
- >
NTID 42992786
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRepair And Modification Of Shu in Pattamundai - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair And Modification Of Shu" in Pattamundai, India.
Department Of Water Resources
Pattamundai, Odisha, India
NTID 42992786
- Opening Date : Tue 16th December, 2025
- Closing Date : Mon 15th December, 2025
- ₹ 1841622.00
- NTID 42992786
Key Values: Document Cost: 6000.00 | EMD: 18500.00 | Estimated Cost: 1841622.00
Tender Description
Repair And Modification Of Shutter Gates For Telengabasanta Check Dam Under Drainage Division Kendrapara For The Year 2025-26.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
18500.00 -
Document Cost
6000.00 -
Estimated Cost
1841622.00
BOQ Items Total Items : 14 | Total Qty : 37.36
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570), fabrication including machining and assembly of second stage embedded parts consisting of sill beam, side seal, track , guide etc., Sluice gate consisting of skin plate , horizontal girder, end vertical girder , seal flats etc., hoisting arrangements consisting of hoist bridge, supporting beams, nut typegear box, base plate etc. of total weight about 5 MT approx for 4 Nos. of sluice gate (Size-1850mm x 2700mm) & Dismantling of Old structure by help of gas cutting, chain pulley block etc including labour charges, consumables, hire charges as per specification with all accessories as per instruction of Engineer-in-charge. | 4.00 | set |
| 2 | Supply of following bought out materials for 4 Nos. of Sluice gate - Bolts, screw, nuts, washers etc- 148 Kg, Bottom Rubber Seal(10mm thick)- 7.4 Mtr., 32 Side Seal(P-Type)- 21.44 Mtr., Split Pin 8x80 of IS:549, Gate Pin 45x150 long, nut type screw gear box suitably square threaded, all including cost of material, machining etc- 4 Set, Operating handle with GI pipe 4 Nos. , Gate stem cum screw rod 63mm with thread length - 8 Mtr., Grease & gear oil etc - 8 Kg., Stainless steel flat - 127.84 Kg | 4.00 | set |
| 3 | Erection, positioning, alligning, fixing, trial, commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track , guide etc., Sluice gate consisting of skin plate, horizontal girder,end vertical girder, seal flats etc., screw hoisting arrangements consisting of hoist bridge, cast iron gear box,supporting beams, cross beam base plate, fixing of anchor bolts, laying of chequered plate as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, Coffer Dam all complete as per instruction of Engineer-in-charge. | 4.00 | set |
| 4 | Painting of 2nd stage embedded parts (exposed portion), gate and its components in both upstream side and downstream side, hoisting components, ladder support including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each for 4 Nos. of Sluice gates all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. | 4.00 | set |
| 5 | Providing reinforced cement concrete grade M-20 of approximately 4.16 cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per specification with all leads, lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction/erection and removal of gangways, staging s, scaffoldings & incidental charges complete for 4 Nos. of Sluice gates as per the direction of the Engineer in-Charge. | 4.16 | cum |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054