- Home
- >
- Tender
- >
- Assam Tender
- >
- Department of BORDER SECURITY FORCE
- >
NTID 47103162
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowRepair And Maintenance Of Unde in Dhubri - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair And Maintenance Of Unde" in Dhubri, India.
- Opening Date : Fri 23rd October, 2026
- Closing Date : Thu 22nd October, 2026
- ₹ 99400.00
- NTID 47103162
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
1988.00 -
Document Cost
Refer Documents -
Estimated Cost
99400.00
BOQ Items Total Items : 3 | Total Qty : 272
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Excavation and relaying of existing /New UG Cable after fault rectification ) Upto 35 sq. mm | 50 | Nos |
| 2 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Excavation and relaying of existing /New UG Cable after fault rectification ) Above 35 sq. mm and upto 95 sq. mm | 220 | Nos |
| 3 | Supply, Installation, Testing, and Commissioning (SITC) of a weatherproof, outdoor cubicle-type power cable joint box, measuring 600 mm (H) x 450 mm (W) x 300 mm (D) (or as per site requirement / direction of the Engineer-in-Charge), fabricated from a minimum 2.0 mm thick CRCA sheet steel enclosure featuring a integrated slanting rain canopy, IP55/IP65 ingress protection, powder-coated finish in RAL 7032 Siemens Grey, and an EPDM/Neoprene door gasket designed for bottom cable entry and exit; the enclosure shall house four sets of high-conductivity E91E grade aluminium disconnecting busbars (minimum 30x8 mm section to ensure equivalent copper ampacity) rigidly mounted on 1.1 kV flame-retardant SMC/FRP insulators providing safe, staggered terminations, complete with heavy-duty aluminium lugs of required size, bimetallic washers to prevent galvanic corrosion, a 25x3 mm internal aluminium earth busbar for armor bonding, and a removable 3.0 mm non-magnetic aluminum gland plate pre-fitted with two CW50 double-compression brass glands; the entire cubicle assembly shall be rigidly mounted on a heavy-duty 35x35x5 mm structural angle iron stand having vertical legs of 750 mm length (or as per site requirement) structurally reinforced via fully interconnected cross-members at both the top and bottom perimeters to eliminate torsional deflection, with the entire structural stand thoroughly cleaned, treated with an anti-corrosive primer, and finished with two coats of heavy-duty synthetic enamel paint of approved shade; the complete structural stand with the joint box shall be securely anchored, aligned, and grouted onto a site-fabricated Cement Concrete (CC) foundation base of nominal size 600 mm x 600 mm x 600 mm, executed strictly as per actual site requirements or as directed by the Engineer-in-Charge, including all necessary ground excavation, shuttering, concrete pouring, curing, backfilling, anchor hardware, and pre-commissioning insulation resistance testing, completely on a turnkey basis etc as required | 2 | Nos |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054