- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of Military Engineer Services
- >
NTID 43287751
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowRepair And Maint And Fixing Of in Kanpur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Repair And Maint And Fixing Of" in Kanpur, India.
Military Engineer Services
Kanpur, Uttar Pradesh, India
NTID 43287751
- Opening Date : Fri 16th January, 2026
- Closing Date : Mon 12th January, 2026
- ₹ 4640000.00
- NTID 43287751
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
92800.00 -
Document Cost
500.00 -
Estimated Cost
4640000.00
BOQ Items Total Items : 5 | Total Qty : 5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply, Installation, Testing & Commissioning of Retrofit Emission Control Device (RECD) for reducing DG emission as per CPCB Guidelines (vide order PCLS/12/2021-22 dtd 1/2/2022 and NGT OA No.681/2018 vide order dtd. 6/8/2019 for Retrofitting of Emission Control Devices. ( AREA - DMSRDE - KANPUR CANTT). Test Report of CPCB authorised Lab - ARAI Pune No. EDL/22-23/EIE/R-007 Dated 07th April 2022. TECHNICAL SPECIFICATIONS: Type of Emission Device (Working principle of the PM reduction active element): Electrostatic Precipitation (ESP) Pollutant captured: PM2.5 Particulate Matter Capturing efficiency: At least 70% Back pressure on engine: No back pressure (Should be less than 100mmwg) Byproduct: Carbon Particles in dry form By product disposals cope: Should be in vendor scope Material of construction (Outer body): Mild Steel Powder coated Material of construction (Inner cells): SS-304 Testing requirements post manufacturing: ISO-8178 5 mode cycle for DG set up to 800KW as per CPCB guidelines Testing requirements post installation at site: Emission monitoring from stack will be done from any NABL approved lab. Product life: 10-15 years Insulation on emission devices: Glass Wool Including Device installation & commissioning, Field piping fabrication & erection (If any), Civil foundation design & execution (If required), Painting of emission devices. (a) DG set of capacity 500 KVA at P-43 tech area. | 1.00 | Complete Job |
| 2 | All as per item No 1.00 above but for DG set of capacity 320 KVA at Nano Lab tech area. | 1.00 | Complete Job |
| 3 | All as per item No 1.00 above but for DG set of capacity 125 KVA at Polymer lab tech area. | 1.00 | Complete Job |
| 4 | All as per item No 1.00 above but for DG set of capacity 100 KVA at Main gate tech area. | 1.00 | Complete Job |
| 5 | All as per item No 1.00 above but for DG set of capacity 63 KVA at Pump House No. 05 RV Colony Note for item No 01 to 05:- All the Aux. materials required for installation at site shall be supplied by the vendor. Performance/characteristic curves at rated load: Under Vendor scope Emission limit values: The retro fitted engine system shall not exceed the PM limits as specified in the NGT order. Reduction levels: 70% reduction in PM levels Secondary Emissions: Vendor shall submit the declaration that there is no secondary emissions Impact on engine back pressure: Any modification of engine operation parameters which might affect the engine baseline emissions must be kept within the limits as per the CPCB norms and guidelines. Noise Emission: No increase in noise levels after retrofit device Important: There should not be any BYPASS arrangement in RECD to let the pollutants bypass the RECD on any account. | 1.00 | Complete Job |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054