Renovation Of Eandm Equipment in Delhi - Complete Tender Details

Renovation Of Eandm Equipment At Various Tube Wells In Chandni Mahal Ward No-76 In Matia Mahal Constituency In Ac-21. - Supplyof Automation Lt Panel Board Suitable For 415 V, 3 Phase, 50 Hz, 4 Wire System For Operation Of Up To 15 Hp Submersible Set, Made Out Of Not Less Than 2 Mm Thick Crca For Load Bearing Members And 1.6 ,, For Doors Of Panel, Totally Enclosed, Dust And Vermin Proof, Floor Mounted Type. The Panel Size 760 Mmx1360 Mmx300 Mm And Having (1) 63 Amp Changeover -1 No (2) 63 A Tpn Mcb -1no (3) Amp.meter 0-50 A -1 No (4) Voltmeter 1 No (5) Amp. & Volt Meter Selector Switches 1 Set (6) Auto Manual + Light+control Mcb Tp 32 Amp-1 No.each (7) Ct--3 Nos (8) Push Button +on/off Light-2 Nos Each (9) 5 Kvar Shunt Capacitor-1 No (10) Aluminium Bus Bar Size 25 Mmx6mm- 1set (11) 15 Hp Star Delta Starter (a) 32 Amp Power Contactor-3 Nos (b) Overload Relay 14-23 A-1 No (c) Star Delta Timer -1 No (d) Qt Timer -24 Hours -1 No (e) Motor Protection Relay Flush Mounting With Display With Thermal O/l, Short Circuit,earth Fault, Phase Loss, Unbalance, Phase Reversal, Locked Rotor Protection Make :- L&t/protech-1 No Make Of Accessories/components As Per Djb Approved Make Of Panels:- L&t/c&s/bch/protech/djb Approved, Supply-of G.i. Pipe 50mm Dia, Medium-class, Each Of 3m±3 Long, Duly Threaded On Both-ends, Welded & Fitted With G.i./ M.s. Flange Of Thickness 6 Mm On Both Ends With A Slot For Submersible-cable. Welding Of M.s Strips At Both Ends On Flange.make Of Pipe: Jindal / Tata., Supply Of Three Core Flat Cable With Bare Bunched Copper Conductor Insulated & Sheathed With Pvc For Submersible Pump Motor With Voltage Grade Upto 1100v Of 6.0 Sq Mm. Size In 100mtr. Roll. Make: Gloster/universal/havells/djb Approved, Supply-of Tail-piece Of Medium-class G.i.-pipe 500 Mm Long With One-end Threaded, As Per Out-let Of Pump And Another-end Flanged, As Per Size Of G.i. Pipe 50 Mm Dia. Make Of Pipe: Jindal / Tata., Supply-of G.i. Bend 90o X 50 Mm Dia, Having Flange At Both-ends., Supply-of Nut-bolts, ½” Dia Of Different Size I.e. 1.5” & 2.5” Long, Threaded Of Good Quality., Supply-of Rubber-packing For 50mm Dia Flange., Supply-of Bore-cover Plate Of Size: 200 Mm Dia, Made Out From 6 Mm Thick M.s.-sheet In 2-halves And A Circular-hole Of 50 Mm Dia In Center With Locking Arrangement By Nuts & Bolts., Lowering & Lifting Of Sub/sets From Bore By Taking Out Doubleflanged Gi Pipes, Submersiblep/set, Cable,cutting Of Rustednuts And Boltsetc And Replacementof Damaged D/f Gi Pipes, Cable,defective Pump Set Etc As Per Site Requirement And Lowering Of Subp/set, Sub Cable, Gi Pipe Etc Asrequired, Jointing Of Cable Fromsub P/set Along With Holding Ofcable With Pipes And The Job Includes Hardware Items Such As Nut Bolts Rubber Packing And Other Misc. Items Requied For Jointing Etc. As Per Site Requirement, Complete Tools And Tackles As Per Site Requirements And Safety Gadget Such As Portalble Emergency Search Light, Safety Helmets , Electric Shock Proof Hand Gloves Gum Boots, Caution Tape And Barrier Cone Etc. As Per Site Requirement And Testing And Commissoing