- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of Public Works Department
- >
NTID 43122039
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRecovery And Restoration Work in Tamluk - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Recovery And Restoration Work " in Tamluk, India.
Public Works Department
Tamluk, West Bengal, India
NTID 43122039
- Opening Date : Mon 12th January, 2026
- Closing Date : Sat 10th January, 2026
- ₹ 18112014.00
- NTID 43122039
Key Values: Document Cost: 0.00 | EMD: 362240.00 | Estimated Cost: 18112014.00
Tender Description
Recovery And Restoration Work Of Tamluk Diversion Road From 0.00kmp To 3.100km Under Tamluk Highway Division, P.w.(roads) Directorate In The District Of Purba Medinipur For Mending Up Damages Occurred Due To Heavy Rainfall / Flood Like Situation.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
362240.00 -
Document Cost
Refer Documents -
Estimated Cost
18112014.00
BOQ Items Total Items : 14 | Total Qty : 33134561.76
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | PART-A : Road Work : Dense Bituminous Macadam Providing and laying dense bituminous macadam with Batch Type HMP of minimum capacity 100-120TPH using Pakur variety crushed aggregate of specified grading, filler(Cement /hydrated lime / Rock dust) premixed with bituminous binder VG-40 of approved grade @4.0% (min) lor Grading -1 and 4.5% (min) for Grading -2 by weight of total mix as per table 500-10 and mix design done as per fable 500- 11 and job mix formula as per clause 505.3.3 to MoRT&H (5th Revision), including screening, cleaning of chips , transporting the hot mix to work site, laying the mixed materials at specified laying temperature, as specified In Table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tock coat, rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic type roller of 12 to 15 tonne weight with a tyre pressure of at least 0.56 Mpa, to achieve the desired density as per clause 505.3.5, all including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction and quality control complete as per Clause 505 of Specifications for Rood & Bridge Works of MoRT&H (Sth Revision). For Grading 2 (26.5 mm nominal size, 50 mm thick.) (i) Using Batch Type HMP of minimum capacity 100-120 TPH. Using Bitumen Emulsion (RS-1 Bulk) @ 0.25kg/sqm. | 175.420 | M3 |
| 2 | Bituminous Concrete Providing and laying bituminous concrete with Batch Type HMP of minimum capacity 100-120TPH using coarse Pakur variety aggregates, fine aggregates, filler materials and bituminous binder VG-40 of required specification including screening, cleaning of chips and preparing a uniform and quality mix in Batch Type HMP of minimum capacity 100-120TPH Plant and ensuring a homogeneous mix, in which all particles of the mineral aggregates are coated uniformly, transporting the hot mix to work site, laying the mixed materials at specified laying temperature with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat, rolling with smooth wheeled, vibratory and tandem rollers for break down, inter-mediate and finished rolling to achieve the desired density of at least 98% of that of Laboratory Marshall specimen, including cost and carriage of bitumen, coarse and fine aggregates and filler materials and hire charges of machinery and equipment for construction and quality control, fuels and lubricants and wages of operational staff complete as per Clause 507 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For Grading 1 (19 mm nominal size, 50 mm thick.) Using Batch Type HMP of minimum capacity 100-120 TPH. Using Bitumen Emulsion (RS-1 Bulk) @ 0.25kg/sqm. | 1407.430 | M3 |
| 3 | Direction and Place Identification Signs with size more than 0.9 sqm size Board Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick witharea exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). | 4.320 | M2 |
| 4 | Supplying & fixing of Raised Pavement Markers / Road Studs / Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to clause no 804 of MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sq.cm. on each side and slope to the base shall be 35 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearance etc. and complete as directed by the Engineer in Charge .The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications. | 368.000 | Nos |
| 5 | Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). i) 90 cm equilateral triangle | 14.000 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054