- Home
- >
- Tender
- >
- Punjab Tender
- >
- Department of Military Engineer Services
- >
NTID 42775697
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Provn Of Stand B in Pathankot - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Provn Of Stand B" in Pathankot, India.
- Opening Date : Mon 8th December, 2025
- Closing Date : Sat 6th December, 2025
- ₹ 3400000.00
- NTID 42775697
Key Values: Document Cost: 500.00 | EMD: 68000.00 | Estimated Cost: 3400000.00
Tender Description
Corrigendum : Provn Of Stand By Trolly Mounted Transformer Of Capacity 800 Kva And 400 Kva For Mh, Domestic And Depot Area Under Ge South Pathankot - Provn Of Stand By Trolly Mounted Transformer Of Capacity 800 Kva And 400 Kva For Mh, Domestic And Depot Area Under Ge (south) Pathankot
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
68000.00 -
Document Cost
500.00 -
Estimated Cost
3400000.00
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum |
| 2 | Corrigendum | Other |
BOQ Items Total Items : 11 | Total Qty : 79
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply, install, testing and commissioning of copper wound step down Transformer, outdoor type, oil immersed, naturally cooled ONAN, rated temperature rise in Oil and winding 45/50 degree centigrade complete with standard fittings of Capacity 800 KVA HT 11KV three phase, LT 433 volts three phase 4 wire 50 Hz and Energy Efficient level - 3 with Off Load Tap Changer (OLTC) Copper wound Class A Oil and paper Insulated with AVR of vector group Dyn- 11 with off load tap changing device on HT side to vary secondary voltage from +5 percent to -5 percent in steps of 2.5% including cable box on HT and LT side, first fill of new transformer oil having dielectric strength not less than 60KV, and suitable mounting rail of appropriate gauge and others standard accessories all as per IS : 1180 ( Part-1) : 2014, (with latest amendment ). Note (i):- The rate quoted deemed to be inclusive of the followings:- (a) Cable termination boxes on LT side and HT side (b) Conservator with filter type drain valve and oil level gauge (c) Breather with silica gel (d) Explosion Vent (e) Thermometer pockets with thermometer on tank cover (f) Rating plate, monogram plate and terminal marking plate (g) The earthing terminal two Nos to faciliate fixing of earth strip (h) Oil filling hole with cap/plug with connection plate complete (i) Air release plug (l) Drain outlet pipe with brass gate valve and dummy plug (m) Intial filled transformer oil upto recommended level confirming to IS 335 (n) ONAN type coolling, vector group DYN 11 (o) Oil level gauge and lifting lugs, (p) silica Gel breather (q) Buchholz relay and others standard accessories all as per IS : 1180 (Part-1) and losses as per clause 7.8.1.1 of IS : 1180 (part- 1) 2014 etc. Any other item as per manufacturer recommendations for best function of transformer if any required are deemed to be included in the quoted rates and complete all as specified and directed. Note (ii): BIS approved CPRI, type test report as per IS-1180 of transformer should be of similar or higher rating to be submitted by the contractor at the time of make approval. | 1.00 | Each Job |
| 2 | Supply, install, testing and commissioning of copper wound step down Transformer, outdoor type, oil immersed, naturally cooled ONAN, rated temperature rise in Oil and winding 45/50 degree centigrade complete with standard fittings of Capacity 400 KVA HT 11KV three phase, LT 433 volts three phase 4 wire 50 Hz and Energy Efficient level - 3 with Off Load Tap Changer (OLTC) Copper wound Class A Oil and paper Insulated with AVR of vector group Dyn- 11 with off load tap changing device on HT side to vary secondary voltage from +5 percent to -5 percent in steps of 2.5% including cable box on HT and LT side, first fill of new transformer oil having dielectric strength not less than 60KV, and suitable mounting rail of appropriate gauge and others standard accessories all as per IS : 1180 ( Part-1) : 2014, (with latest amendment). Note (i) :- The rate quoted deemed to be inclusive of the followings:- (a) Cable termination boxes on LT side and HT side (b) Conservator with filter type drain valve and oil level gauge (c) Breather with silica gel (d) Explosion Vent (e) Thermometer pockets with thermometer on tank cover (f) Rating plate, monogram plate and terminal marking plate (g) The earthing terminal two Nos to faciliate fixing of earth strip (h) Oil filling hole with cap/plug with connection plate complete (i) Air release plug (l) Drain outlet pipe with brass gate valve and dummy plug (m) Intial filled transformer oil upto recommended level confirming to IS 335 (n) ONAN type coolling, vector group DYN 11 (o) Oil level gauge and lifting lugs, (p) silica Gel breather (q) Buchholz relay and others standard accessories all as per IS : 1180 (Part-1) and losses as per clause 7.8.1.1 of IS : 1180 (part- 1) 2014 etc. Any other item as per manufacturer recommendations for best function of transformer if any required are deemed to be included in the quoted rates and complete all as specified and directed. Note (ii): BIS approved CPRI, type test report as per IS-1180 of transformer should be of similar or higher rating to be submitted by the contractor at the time of make approval. | 1.00 | Each Job |
| 3 | Material and labour for trolley of size (12.0 x 8.5 x 5.0) feet, suitable for for 800 KVA distribution transformer made out of mild steel angle/ chanels medium weight beams & MS flates with necessary welding in any postion driliing in hot/cold etc for main channel of size 200 mm x 75 mm longitude and cross members/ support channels of trolly made out of ISMC chanel of size 150 mmx 50 mm and top of the members coverd with not less than 5.0 mm thick MS plate plateform and 10 nos vertical side support at equal distance over the plateform and two nos horizentol support at bottom and top with MS equal angle of size 50 x 50 x 6 mm thick angles and (50x5) mm thick Ms flat iron strip for two runs of bracing the supports in middle section of the vertical support along with welded MS wire mess of size not less than 50mmx 25mm and each wire diameter not less than 3.0 mm all around the height of trolley, V type towing frame with hook with spring and check nuts and mounting bracket with bush for movement of tow assembly and 10 mm thick moving plate for movement of the toing assambly. The assembly made out of ISMC chanel 150mmx 50 mm with long and cross member, turning plate assembly for front wheel only fitted in front axle, the size of front and rear axle is not less than 70 mmx70 mm heavy squre ISMB having 08 nuts and bolts in each axle including 04 Nos new Tyres of reputed manufacturares ( 02 Nos for Each Axle) with tube of size 825-16 play rating four nos with heavy wheel drum, mounting bracket, bearings, check nuts, lock nuts, key and road spring on both Axle for suspension and weight balancing of transforner etc welded with medium beam with nut bolts washers as required for mounting the transformer complete all as specified and directed. | 1.00 | Each Job |
| 4 | Material and labour for trolley of size (9.18 x 8.20 x 3) feet, suitable for for 400 KVA distribution transformer made out of mild steel angle/ chanels medium weight beams & MS flates with necessary welding in any postion driliing in hot/cold etc for main channel of size 200 mm x 75 mm longitude and cross members/ support channels of trolly made out of ISMC chanel of size 150 mmx 50 mm and top of the members coverd with not less than 5.0 mm thick MS plate plateform and 10 nos vertical side support at equal distance over the plateform and two nos horizentol support at bottom and top with MS equal angle of size 50 x 50 x 6 mm thick angles and (50x5) mm thick Ms flat iron strip for two runs of bracing the supports in middle section of the vertical support along with welded MS wire mess of size not less than 50mmx 25mm and each wire diameter not less than 3.0 mm all around the height of trolley, V type towing frame with hook with spring and check nuts and mounting bracket with bush for movement of tow assembly and 10 mm thick moving plate for movement of the toing assambly. The assembly made out of ISMC chanel 150mmx 50 mm with long and cross member, turning plate assembly for front wheel only fitted in front axle, the size of front and rear axle is not less than 70 mmx70 mm heavy squre ISMB having 08 nuts and bolts in each axle including 04 Nos new Tyres of reputed manufacturares ( 02 Nos for Each Axle) with tube of size 825-16 play rating four nos with heavy wheel drum, mounting bracket, bearings, check nuts, lock nuts, key and road spring on both Axle for suspension and weight balancing of transforner etc welded with medium beam with nut bolts washers as required for mounting the transformer complete all as specified and directed. | 1.00 | Each Job |
| 5 | Supply Laying Testing & commissioning of HT UG cable, XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) with stranded aluminium conductor 11 KV grade (Earthed system cable) as per IS 7098 Part-II, of size 3 Core 95 Sqmm complete all as specified and directed. | 34.00 | RM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054