- Home
- >
- Tender
- >
- Odisha Tender
- >
- Department of Orissa Mining Corporation Limited
- >
NTID 45971298
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProvision Of Illumination To T in Kendujhar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Provision Of Illumination To T" in Kendujhar, India.
- Opening Date : Fri 31st July, 2026
- Closing Date : Thu 30th July, 2026
- ₹ 4769000.00
- NTID 45971298
Key Values: Document Cost: 7080.00 | EMD: 48000.00 | Estimated Cost: 4769000.00
Tender Description
Provision Of Illumination To Transportation Road And Safety Related Electrical Works Of Khandabandha Iron Are Mines In The District Of Keonjhar.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
48000.00 -
Document Cost
7080.00 -
Estimated Cost
4769000.00
BOQ Items Total Items : 32 | Total Qty : 5804
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Electrical Works | ||
| 2 | Supply, Installation, Testing and Commissioning of 8 Mtr long PSC/RCC pole (200 Kg) including earth excavation work, concreting of pole (1.0Mtr X 0.5 Mtr X 0.5 Mtr=0.250Cum) with PCC (1:1.5:3) with couping of support (0.45Mtr X 0.5 Mtr X 0.5 Mtr=0.1125Cum) with PCC (1:1.5:3) , all accessories, cost of labour, T&P etc complete the work as per Direction of Engineer-In-Charge . | 70.00 | Each |
| 3 | Supply, Installation & commissioning of Anti-Climbing Device made of GI barbed wire, Clamping arrangement etc. (2 Kg Per Support) including all accessories, labour cost, T&P etc. complete work as per direction of EiC | 152.00 | Kg |
| 4 | Supply, installation and commissioning of 440 V Danger Board in accordance with Rule No.20 of CEA Regulation-2023, the minimum size of plate 250 x 200 mm, made up of mild steel sheet of 1.6 mm thick and vitreous enameled white, with letters, figures and the conventional skull & cross-bones in signal red colour on the front side (the rear side of the plate shall also be enameled in white colour). The language of the danger board should be of Odia,English & Hindi and the size of letters in each language and spacing between them shall be so chosen that these are uniformly written. The corners of the plates shall be rounded off and the location of fixing holes shall be such that it shall be bolted through pole clamp. For each support including all accessories, labour cost, T&P etc. complete as per direction of EiC | 100.00 | Each |
| 5 | Supply, Installation, Testing & Commissioning of 10mtr high GI Octagonal monkey amounted arrangement pole shall be designed to withstand the maximum wind speed as per IS 875 (250Km/Hr). The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BSEN 40-3-3:2003. Octagonal Poles made from HT Steel Conforming to grade S355 & having thicknessof 4mm.Top dia 90mm & Bottom dia 240mm single sharp welding with base plate dimension 325x325x20 mm & Base Plate must be Fe 410 conforming to IS 2062, foundation bolts must EN 8 grade & bolts size must be 4X26mm dia,PCD 325mm,Bolt length 750mm long.The door opening of the pole should be reinforced,water proofed & with locking arrangement & arrangement of in out door junction box made of FRP / cast aluminium with terminal arrangement and 1 No. of 25Amp TPN MCB & terminal box with provision for connection of earth & nutral on 5mm thick fiber plate which will be kept in side the pole for termination of cable & wire,The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process.The poles shall be hot dip galvanized in single dipping as per BS EN ISO 1461 standards with average coating thickness of 90 micron. Arrangement of GI Circular bracket Suitable for install 6nos 250W led flood light fixtures should be there at the top of the pole. The foundation of the Light Mast should be as per the drawing attached in the SBD. (Detail Drawing of pole & Foundation drawing attached in the SBD) | 2.00 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054