ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowProviding Wooden Ramp In Entra in Solan - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing Wooden Ramp In Entra" in Solan, India.
Dr. Yashwant Singh Parmar University of Horticulture and Forestry
Solan, Himachal Pradesh, India
NTID 44347100
- Opening Date : Wed 18th March, 2026
- Closing Date : Wed 18th March, 2026
- ₹ 282082.00
- NTID 44347100
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 10 | Total Qty : 113.05
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete in all respect as per satisfaction of Engineer-in charge. | 0.90 | Cubic metre |
| 2 | Providing and laying antiskid vitrified floor tiles full body in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm | 2.10 | Square metre |
| 3 | Polishing in high gloss/ matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below.a). The surface to be polished in rubbed with sand paper 80/ 120 no. andthen with sand paper of 160/ 180 nos. applying two coats of sealer with spray gun and following sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. On drying sealer coat, wet rubbing with emery clothfiner grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in- Charge. ( Final coat to be done in 1 or 2 layers without gap of time) | 49.54 | Square metre |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads etc. complete as per direction of Engineer - in charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). | 0.78 | Cubic metre |
| 5 | Providing and fixing 2nd class teak wood 62mm into 25 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete in all respect as per satisfaction of Engineer-in-charge. | 6.85 | Running metre |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054