- Home
- >
- Tender
- >
- Tamil Nadu Tender
- >
- Department of Public Works Department
- >
NTID 46003949
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding Upvc Partition And I in Tirunelveli - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing Upvc Partition And I" in Tirunelveli, India.
Public Works Department
Tirunelveli, Tamil Nadu, India
NTID 46003949
- Opening Date : Thu 6th August, 2026
- Closing Date : Wed 5th August, 2026
- ₹ 595000.00
- NTID 46003949
Key Values: Document Cost: 0.00 | EMD: 5950.00 | Estimated Cost: 595000.00
Tender Description
Providing Upvc Partition And Instrument Wash Scrub Sink Arrangements In Second Floor Dialysis Ward In Critical Care Block Building In Tirunelveli Medical College Hospital At Tirunelveli District
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
5950.00 -
Document Cost
Refer Documents -
Estimated Cost
595000.00
BOQ Items Total Items : 11 | Total Qty : 45.45
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | The supply and installation of uPVC partitions with doors shall utilize uPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 74mm x 60mm x 56mm, a shutter of 104mm x 60mm x 66mm, a mullion of 72mm x 60mm x 36mm, a glazing bead of 35mm x 18mm, a 20mm multi-chambered hollow uPVC panel section of 150mm x 20mm, and a uPVC panel bead of 19mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, where required, with 1mm thick GI steel sections. The door will be equipped with 3D hinges for enhanced weight holding capacity, and security devices such as multipoint lock systems with a cylinder lock facilitated handle, all compliant with relevant specifications and departmental directives. Glazing or uPVC panels shall be 5mm thick Plain Toughened or uPVC panel grip, held by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash shall be mitred cut and fusion welded without mechanical joints, with all welded joints neatly trimmed to a grooved nib finish, ensuring the finished products are free from sharp edges. The complete units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high-quality fasteners, and silicon sealant shall be applied to fill the gap between the wall and the frame for a leak- proof installation and completion etc., Complete and as directed by the department officers. | 19.3 | M2 |
| 2 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un- plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. | 9.45 | M2 |
| 3 | Supplying and fixing of stainless steel SS 304 grade wash tub of overall size of 1.35 x 0.65 x 1.20m. The wash tub will be of depth 0.65m. The top width of the wash tub is 0.60m and bottom width of wash tub is 0.30m. The balanced bottom portion is covered by SS 304 grade stainless steel plate with SS screws. The tub fixed into the wall by using stainless steel angles of size 25 x25mm x 1.6mm. The rate including 2 Nos of Stainless Steel Elbow action tap 15mm tap, 1 No of 40mm stainless steel waste cup, Dismantling the masonry (or) concrete wall and redoing the same to its original condition folding charges, transporting, Installation charges etc complete. | 1 | No. |
| 4 | Supplying and fixing of stainless steel SS 304 grade wash tub of overall size of 0.75 x 0.65 x 1.20m. The wash tub will be of depth 0.65m. The top width of the wash tub is 0.60m and bottom width of wash tub is 0.30m. The balanced bottom portion is covered by SS 304 grade stainless steel plate with SS screws. The tub fixed into the wall by using stainless steel angles of size 25 x25mm x 1.6mm. The rate including 1 No of Stainless Steel Elbow action tap 15mm tap, 1 No of 40mm stainless steel waste cup, Dismantling the masonry (or) concrete wall and redoing the same to its original condition folding charges, transporting, Installation charges etc complete. | 1 | No. |
| 5 | Supplying, laying and jointing CPVC pipes of Standard Dimension Ratio-11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works). |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054