- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of Haldia Development Authority
- >
NTID 47143648
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding Speed Breaker And Pa in Midnapore - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing Speed Breaker And Pa" in Midnapore, India.
Haldia Development Authority
Midnapore, West Bengal, India
NTID 47143648
- Opening Date : Mon 2nd November, 2026
- Closing Date : Sat 31st October, 2026
- ₹ 363811.00
- NTID 47143648
Key Values: Document Cost: 0.00 | EMD: 8000.00 | Estimated Cost: 363811.00
Tender Description
Providing Speed Breaker And Painting Of Existing Speed Breaker On The Road From B.c.roy Hospital To City Centre.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
8000.00 -
Document Cost
Refer Documents -
Estimated Cost
363811.00
BOQ Items Total Items : 6 | Total Qty : 309023.5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Rumble Strips Provision of 3 No.s rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint. Tack coat Providing and applying tack coat with paving bitumen of VG-10 grade conforming to IS:73 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503) i)On bituminous surface @ 0.20kg 0.3kg /sqm. Ref: Page-111, Sl no.2, B, i -HN sch 2019-2020. | 172.8 | Sqm. |
| 2 | Bituminous Macadam. Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder@3.3% (min) forGrading-and 3.4% (min) for Grading-2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). ii) for Grading II (19mmnominal maximum aggregate size) Layer Thickness 50-75mm Ref: Page-112, Sl no.3, ii-HN sch 2019-2020. Ref: Derived rate | 4.32 | Cum. |
| 3 | Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedp remix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen of approved grade to required line, gradeand level toserveaswearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandemor other approved type roller 8-10 tonne capacity, finished to requiredlevel andgrades (ReferencetoMORT&H's specification clause 510). Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour. Ref: Page-119, Sl no.10(i) -HN sch 2019-2020. | 86.4 | Sqm. |
| 4 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type B seal coats (Reference to MORT&H's specification clause 511) Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Ref: Page-121, Sl no.12,ii -HN sch 2019-2020. | 86.4 | Sqm. |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Page : 146 Item No: 13 PWD NH SOR | 358.94 | Sqm. |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054