- Home
- >
- Tender
- >
- Tamil Nadu Tender
- >
- Department of Highways Department
- >
NTID 42983817
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding Road Furniture At Km in Tiruvannamalai - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing Road Furniture At Km" in Tiruvannamalai, India.
Highways Department
Tiruvannamalai, Tamil Nadu, India
NTID 42983817
- Opening Date : Wed 17th December, 2025
- Closing Date : Wed 17th December, 2025
- ₹ 24720000.00
- NTID 42983817
Key Values: Document Cost: 0.00 | EMD: 135000.00 | Estimated Cost: 24720000.00
Tender Description
Providing Road Furniture At Km 9/8 - 12/0 And 31/0 - 35/0 Of Tiruvannamalai Arur Road (via) Thanipadi
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
135000.00 -
Document Cost
Refer Documents -
Estimated Cost
24720000.00
BOQ Items Total Items : 45 | Total Qty : 15709.05
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniForm and free from streaks and holes etc complete as per MORT&H specification No.803. | ||
| 2 | Road Furniture | 6303.05 | Square Metre |
| 3 | Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly carbonate / methyl methercrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conForming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTI circular No RW / NH. 33023/10/ 97-DO.I dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/-I degree. Each reflector shall have a ClL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road For the shanks to go inside, without nails and using (epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer, The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORT&H specification 804 letc., complete | ||
| 4 | Road Furniture | 7352.00 | Numbers |
| 5 | Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and InFormatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956 -09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX15cmX60cm size ineluding cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary For satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67- 2012. The retro - reflective sheeting shall be covered under 7 year warranty issued For field perFormance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. ( as per MORT& Specification No.801 |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054