- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of Airports Authority of India
- >
NTID 42973210
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding And Installation Of in Kolkata - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing And Installation Of " in Kolkata, India.
Airports Authority of India
Kolkata, West Bengal, India
NTID 42973210
- Opening Date : Mon 22nd December, 2025
- Closing Date : Sat 20th December, 2025
- ₹ 5976507.00
- NTID 42973210
Key Values: Document Cost: 1180.00 | EMD: 179295.00 | Estimated Cost: 5976507.00
Tender Description
Providing And Installation Of Pre Fabricated Pseudo Puf Toilet Block Along With Providing And Sinking Of Required Bore Wells At Nscbi Airport Kolkata Sh Electrical Works
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
179295.00 -
Document Cost
1180.00 -
Estimated Cost
5976507.00
BOQ Items Total Items : 26 | Total Qty : 6959
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply of 7.5 HP (5.6 kW), 3 Phase, 415 volts, 50 Hz, rating, vertical Submersible Pump Motor set, discharge capacity minimum 200 LPM, head minimum - 90 mtrs, suitable for DOL operation etc as required as per specification and AAI preferred make list. | 2 | Each |
| 2 | ITC of existing (as per BOQ Item No. 1) 7.5 HP Submersible Pump Motor set, including Supply and Laying of 80 mm dia. C class Gl pipe (flange type joints) with necessary sockets, bends, nut-bolts, washer, gasket etc. upto 60Mtr with reducer compatible to distribution outlet, 10 mm double steel wire rope upto 100 mtr . 4 sq.mm X 3 core copper flat cable upto 60 Mtr. including lowring with U clamp, well cover(as per site requirement). NRV and Gate valve, supporting clamps, flange, pressure gauge etc.required. | 2 | Job |
| 3 | Design, Fabrication, supply, installation, Testing and commissioning of outdoor type dust & vermin proof feeder pillar made of not less than 2mm thick MS sheet of suitable size confirning to IP 55 with 4 strip TPN aluminium bus bar suitable for 100 amps capacity & including hinged lockable door on the both side of panel etc, as required. Supply and fixing, of following electrical switchgears including interconnection of switchgears with suitable capacity of aluminium busbar/ cable, required 3 phase ammeter and Volt meter, LED indicators, interconnection, earthing, painting, i/c cleaning and finishing complete with powder coating in approved shade, bottom base of MS channel and Legs (50mmx50mmx6mm) , have a common GI earth bar with 2 nos earth stud, internal connection by suitable aluminium strip/bar or aluminium cable as per specification and control wiring with 2.5 Sq.mm PVC insulated copper conductor cable i/c providing the following switch gears and same should be fixed 2 ft. height (from ground level) on brick foundation, i/c outgoing and incoming electrical connection etc as required. 1. 100 amps, 4 pole, 25 KA MCCB incoming with extended rotary handle-2 No's 2. DOL starter-1 No. ( Pump operation should be capable of both Auto and Manual mode with selector switch and timer switch -suitable for BOQ Item No.01 mentioned above). 3. DP MCB-32A - 3 Nos. 4. Single phasing preventer-1 No's 5. Timer switch with suitable power contactor-1No's 6. Thermal Over Load relay-1 No's 7. Digital Voltmetr (0 to 500 volts) with selector switches at both the incomers - 02 nos 8. Digital Ammeter (0 to 150 A ) - 05 nos with necessary CTs and selector switches at all incomers and outgoings, 9. RYB indication lamps & ON/OFF & trip-led indication lamp - ( each incomer)- 02 sets 10.ON/OFF & trip-led indication lamp at all outgoings - 03 sets Note: All the control/ indication wiring should be separate & individual MCB as required | 3 | Job |
| 4 | Supply of 1.1 kV Power Cable with Aluminium Conductor XLPE Insulated Armoured As Per IS 7098 (Part 1) 2011 with Up To Date Amendments of following sizes | ||
| 5 | 3.5 core X 95 sq mm | 1950 | Mtr |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054