- Home
- >
- Tender
- >
- Pondicherry Tender
- >
- Department of Department of Higher and Technical Education
- >
NTID 43705143
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding And Fixing Aluminium in Pondicherry - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing And Fixing Aluminium" in Pondicherry, India.
Department of Higher and Technical Education
Pondicherry, Pondicherry, India
NTID 43705143
- Opening Date : Mon 2nd February, 2026
- Closing Date : Mon 2nd February, 2026
- ₹ 0.00
- NTID 43705143
Key Values: Document Cost: 525.00 | EMD: 93500.00 | Estimated Cost: 0.00
Tender Description
Providing And Fixing Aluminium Partition, Furniture, Cubicles, In The Ad Block For Second Floor In The Ptu Campus Under Rusa Fund
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
93500.00 -
Document Cost
525.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 49 | Total Qty : 2904
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Dark Room: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10' Height Aluminum Partition | 369 | Sqft |
| 2 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60 80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm | 1 | Nos |
| 3 | Supply & Fixing of Slotted Angle Rack of size 108 (H) x 18 (D) x 36 (L) Angle made up of 14 Gauge & Panel made up of 18Gauge, 8 panels making with 7 Compartments duely powder coated after necessary treatment. | 22 | Nos |
| 4 | Chairman Table : Supply & Fixing of Chairman Table of size 1800mmx600mmx900mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC Beeding bottom legs of size 40x40x2mm MS pipe, Box made up 1.6mm Thick CR Sheet duely powder coated after necessary treatment provided with selves, door, Lock & Handle.(AS Per Drawing) (Lock & 4" Handle make- Ebco,Telescopic Channel make - Ebco)(PVC Beeding make - Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins) | 10 | Nos |
| 5 | Valuation Table: Supply & Fixing of Valuation Table of size 900mmx600mmx750mm top made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC Beeding bottom legs of size 1"x1" MS pipe duely powder coated after necessary treatment provided with 10mm thick divider plain glass(Glass Make - Saint Gobain) with D brackets.(D Brackets Make - Ebco)(PVC Beeding make - Rehau), (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins) | 118 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054