- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Shimla Jal Prabandhan Nigam Limited
- >
NTID 42868561
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertName Of Work Rejuvenation Of R in Shimla - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Name Of Work Rejuvenation Of R" in Shimla, India.
Shimla Jal Prabandhan Nigam Limited
Shimla, Himachal Pradesh, India
NTID 42868561
- Opening Date : Fri 28th November, 2025
- Closing Date : Fri 28th November, 2025
- ₹ 502354.00
- NTID 42868561
Key Values: Document Cost: 500.00 | EMD: 10100.00 | Estimated Cost: 502354.00
Tender Description
Name Of Work Rejuvenation Of Rain Water Harvesting Tank At Naldehra Golf Course P F P Machinery For Lifting Of Rain Water Sh Balance Work Of Rain Water Harvesting Tank By Providing Water Tank Waterproofing Food Grade Foaming Pu
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 8 | Total Qty : 171.71
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing the surface to receive water proofing treatment by cleaning the surface with wire brushes to clean , smooth & dry the surface free of any loose practicles/ reinforcement bars/ debris etc. Providing & repairing all cracks wider than 1 mm, construction joints , wall to floor , and wall to wall joints need to be opened in to a V - groove and filled with a mixture of polymer modified repair mortar & mixed in a ratio 1:3 as per site requirement and complete in all respect i/c all leads & lifts and carriage of material at site as directed by the Engineer-in-charge., allowing a drying gap between successive coats. Providing & applying three coat of Crystalflex 2K Supe r stronng over the repaired surface as per site requirement and complete all respects including all lead and lifts and carriage of materials at site as direted by the Engineering -in- Charge. allowing a drawing gap between successive coats. Providing & applying one coat of acryflex 2K extra strong over the prepared surface as per site requirement & complete in all respects including all leads, lifts & carriage of materials at site as directed by the Engineer-in-Charge, allowing a drawing gap between successive coats. Before applying Acryflex 2K extra strong the substrate must be throughly pre-wetted to achieve a slightly (non shiny) humid surface. Remove Excess water of puddles. Providing & applying one coat of AB-POX -016 Epoxy primer coat the prepared surface and spring kling dry quartz sand (approximately 0.5 kg/Sqm.) as required per site and complete in all respect including all leads and lifts and carriage of materials of site as directed by the Engineer-in-Charge, allowing a drawing gap between successive coats. Providing and Applying to finel coats of AB-POX-466 WI as required per site and complete in all respect. including all leads & lifts and carriage of materials at site as directed by the Engineer-in-Charge allowing a drawing gap between successive coats. | 133.01 | Sqmtr |
| 2 | Foaming PU Injection Grouting Per Packer. | ||
| 3 | P/F non return packers after drilling holes of 14 mm diameter at site a distance of 500 mm C/C in both horizontal & vertical directions. Providing & injecting single component PU plain injection , single component polyurethane plain injection grout injected with a machenically piston - driven pump with a maximum pressure of upm to 100 bar or as per the requirement 8''x30'' wall thickness) | 25 | Each |
| 4 | Supply, errection , testing & commissioning of Centrifufugal Monoblock pump Havells make , Model CMQ20D-W Conforming to OHSAS 18001--iso-9001, ISO 14001 directly coupled Mono block type squrrel cage electrical induction motor for suitable for operation on 415 volt , 3 phase 50C.P.S.A. C supply with water lubricated bearing & rovided with pivoted segment type thrust bearing to with stand non vertical lead with minimum wear and tear and duly fitted with device to take up to the expension of water with heating of motor complete in all respect i/c entire carriage of material up to all leads& lifts. ( 3.HP) | 1 | / Set |
| 5 | Manufacturing & fixing GMS tube bend for common header of required degree as per site requirement made out of parent pipe GMS pipe 25 mm dia i/c cutting welding of GMS pipe complete in all respect as per the direction of Engineer-in-charge. ( I/C 2 Nos gatevalve 25 mm dia + 1 no Non return valve + other fitting) complete. | 1 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054