- Home
- >
- Tender
- >
- Tamil Nadu Tender
- >
- Department of MUNICIPAL CORPORATION
- >
NTID 42989660
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertNagercoil Corporation Maintena in Nagarcoil - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Nagercoil Corporation Maintena" in Nagarcoil, India.
MUNICIPAL CORPORATION
Nagarcoil, Tamil Nadu, India
NTID 42989660
- Opening Date : Fri 5th December, 2025
- Closing Date : Fri 5th December, 2025
- ₹ 0.00
- NTID 42989660
Key Values: Document Cost: 0.00 | EMD: 2100.00 | Estimated Cost: 0.00
Tender Description
Nagercoil Corporation Maintenance And Replacing Of Existing Damaged Door And Providing Steel Doors And Windows In Aloor Government Primary School At Ward No.1
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
2100.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 6 | Total Qty : 355
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Maintenance and Replacing | ||
| 2 | Doors and Windows including removal of frames, hinges and fastenings | 14.00 | m2 |
| 3 | Supplying and xing Mild Steel grills for windows, ventilators etc.,complete complying with standard speci cations and as directed by the departmental of cers. | 280.00 | kg |
| 4 | Fabricating, Supplying and xing in position of steel sheeted windows ( Two Leaves) with the following speci cations. Outer frames of windows made of Z section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion J section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as speci ed in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffeners of the same MS ats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position rmly. 2 numbers of Steel O set Pivot hinges of size 3 and one number of handle-Cu.m-latch of special type made with 18x5mm MS ats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation.a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 kg/ m MS at of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 200mm length spliced at the ends are welded to the outer frame of the window by using MS at of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental of cers. All sections should be in con rmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete complying with standard speci cation and as directed by the departmental of cers. . | 14.00 | m2 |
| 5 | Manufacturing supplying and xing of Fully Panelled steel door with the following speci cation MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S at is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. at 18x5mm is welded over the 32 x 6mm M.S. at sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. at is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters. at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and xing. All members are given a coat of red oxide primer as directed by the departmental of cers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard speci cation and as directed by the departmental of cers. - Single leaf of size 1.00m x 2.10m. | 17.00 | m2 |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054