- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of MUZAFFARNAGAR DEVELOPMENT AUTHORITY
- >
NTID 47137032
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding Expert11 - Muzaffarnagar Ke Nh - 58 in Muzaffarnagar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "11 - Muzaffarnagar Ke Nh - 58 " in Muzaffarnagar, India.
MUZAFFARNAGAR DEVELOPMENT AUTHORITY
Muzaffarnagar, Uttar Pradesh, India
NTID 47137032
- Opening Date : Wed 4th November, 2026
- Closing Date : Tue 3rd November, 2026
- ₹ 432000.00
- NTID 47137032
Key Values: Document Cost: 590.00 | EMD: 10000.00 | Estimated Cost: 432000.00
Tender Description
11 - Muzaffarnagar Ke Nh - 58 Ke Sandhawali Cut Se Vasundhra Railway Underpass Tak 90 Watt Street Light Lagai Jane Ka Kariya
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 6 | Total Qty : 1312
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required (i) Above 6.5 Meter and upto 8.0 Meter | 20 | Nos |
| 2 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥135 lm/Watt).Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥135 Im/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (i) 90 Watt | 20 | Nos |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 4x10 sq.mm (25mm) | 625 | Mtr |
| 4 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. (i) 63A TP&N | 2 | Nos |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (i) 63 mm dia (OD-63mm & ID-51mm nominal) | 625 | Mtr |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054