- Home
- >
- Tender
- >
- Tamil Nadu Tender
- >
- Department of General Services Organisation
- >
NTID 43690477
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowInternal And External Painting in Kalpakkam - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Internal And External Painting" in Kalpakkam, India.
General Services Organisation
Kalpakkam, Tamil Nadu, India
NTID 43690477
- Opening Date : Fri 13th February, 2026
- Closing Date : Thu 12th February, 2026
- ₹ 5880000.00
- NTID 43690477
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
117600.00 -
Document Cost
Refer Documents -
Estimated Cost
5880000.00
BOQ Items Total Items : 42 | Total Qty : 52802
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side at all height made using 40mm diameter M.S. tube spaced @ 1.5m center to center at both horizontal and vertical joining with cup and lock system with M.S.tube, M.S.tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc., including maintaining it in a serviceable condition for the required duration as approved, removing after completion of repair works, the scaffolding system shall be stiffened with bracings, runners connection with the building, etc., wherever required for essential safety features for the workmen, etc., all complete as directed by Engineer-in-charge. Note: 1) The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. 2) The buildings are of Ground+ 2 storied structure and the contractor has to observe all safety procedure while working on heights as per I.S. 3696 (Part-I) - 1987. (Safety Code for scaffolds). 3) All working platform must be of minimum 600 mm wide, made of M.S pipe and must have guard rails as per specification. 4) Screen of suitable material shall be provided to the full height of scaffolding and securely tied to protect falling objects coming out during the repair work is in progress. 5) To protect workers on lower platform against falling objects from higher level over head protection should be provided on the scaffolds. 6) Necessary aluminium/ M.S. ladder shall be provided at the cost of the contractor, to the full height of scaffolding at required location around the building to enable Departmental Supervisor/Engineer climb up and closely watch the repair work of the building. | 2000.00 | Sq.m. |
| 2 | Providing plastering to the external surfaces of brickwork/concrete at all elevations in cement mortar 1:5 using crushed stone sand, 12mm thick admixed with cementitious waterproofing admixture of approved make at 400gms per bag of cement or approved water proofing chemical as with ratio as per manufacturer recommendation and including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications and as directed by the Engineer-in-Charge. | 250.00 | Sq.m. |
| 3 | Repairs to the wall and ceiling cracks by chipping and removing the damaged portion upto 20 to 30mm deep, 100 to 200mm wide and plastering with CM 1:3 including making grooves over cracks, grouting with cement slurry or approved crack filling compound of make MC Bauchemie (MC Crackfill) or other approved make, providing glass fibre mesh or chicken reinforcement over the area, applying SBR based bonding chemicals, finishing the surface, curing, disposing the debris at suitable places within 2Km lead etc., all complete as per specification and as directed by Engineer-in-charge | 300.00 | Sq.m. |
| 4 | Repairs over the spalling on concrete members by chipping and removing the damaged portion and plastering with CM 1:3 including cleaning the surfaces, applying rust converter of approved quality, filling the damaged portion with cement concrete wherever required, applying necessary approved quality bonding chemicals, finishing the surface in layers, curing, white washing two coats, disposing the debris within 2Kms lead etc., all complete as per specification and as directed by Engineer-in-charge. | 120.00 | Sq.m. |
| 5 | Repairs to the wall and ceiling cracks in rough cast plastering by chipping and removing the damaged portionand plastering with rough cast plaster of 19mm thick with base layer in CM 1:5 and top layer in CM 1:3 to match with existing plastering including making grooves over cracks, grouting with cement slurry or approved crack filling compound, providing Glass fibre mesh, applying necessary approved quality bonding chemicals, finishing the surface, curing, white washing two coats, disposing the debris within 2Kms lead etc., all complete as per specification and as directed by Engineer-in-charge. | 50.00 | Sq.m. |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054