- Home
- >
- Tender
- >
- Pondicherry Tender
- >
- Department of PORT Department,Works
- >
NTID 42786848
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertDrydock Repair Works In Dredge in Pondicherry - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Drydock Repair Works In Dredge" in Pondicherry, India.
PORT Department,Works
Pondicherry, Pondicherry, India
NTID 42786848
- Opening Date : Thu 27th November, 2025
- Closing Date : Wed 26th November, 2025
- ₹ 5445525.00
- NTID 42786848
Key Values: Document Cost: 1050.00 | EMD: 108911.00 | Estimated Cost: 5445525.00
Tender Description
Drydock Repair Works In Dredger Karaikal
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
108911.00 -
Document Cost
1050.00 -
Estimated Cost
5445525.00
BOQ Items Total Items : 24 | Total Qty : 22
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Dry-dock repair works in Dredger Karaikal -2025 | ||
| 2 | Removal of spuds and Painting: Removal of 2 spuds from the dredger and placing them on the floor for painting. The spuds should be placed over the wooden blocks to have a minimum clearance of 150mm.The wooden sleepers are to be brought by the contractor. The spuds should be reassembled on the dredger after completion of dry docking. | 1 | Job |
| 3 | i) Dry-docking of Dredger: Positioning and Placing the dredger over the cradle, hauling the cradle over the slipway by winch. Lifting the Dredger using Jacks and placing over the wooden supports provided underneath the dredger at suitable locations as per the design & drawing of the Dredger. Before commencement of the work, it is to be confirmed that the dredger is stable on the supports. The slipway facility shall be provided by the department. ii) Un-docking of Dredger: After completion of works, the Dredger to be un-docked safely from the slipway facility in to the water. | 1 | Job |
| 4 | Underwater Hull cleaning: Removal of Oyster marine growth in under water portions of the Dredger thoroughly using suitable machinery. After the removal of Oyster Marine growth, the under water portions are to be hydro blasted with fresh water at 200 Bar pressure using suitable Hydro Jet Machines. | 1 | Job |
| 5 | Reconditioning of Cutter ladder assembly: The Cutter ladder is to be lifted and placed over a firm support for inspection of underneath portions of cutter ladder. Removal of old angles, corroded M.S Plates of the Cutter Ladder assembly at specified locations as detailed below by gas cutting to the required dimensions and replacing with new material. Cutting and welding to be done by engaging first class welders. a) Crown supporting plates: i) M.S Plate size: 1600 mm X 500 mm x 8 mm thick -1 No ii) M.S Plate size: 400 mm X 350 mm x 8 mm thick 5 Nos. b) Hanging Pulley brackets of bottom plates; i) M.S Plate size: 1600 mm X 950 mm x 8 mm thick 1 No ii) M.S Plate size: 760 mm X 550 mm x 8 mm thick 1 No c) Suction pipe support bracket plates; i) M.S Plate size: 1500 mm X 500 mm x 10 mm thick - 6 Nos ii) M.S Flat size: 100 mm X 10 mm - 12 mtr long-1 No iii) M.S Flat size: 75 mm X 10 mm - 12 mtr long-1 No d) Replacement of Cutter ladder suction pipe reducer: Removal of old Cutter ladder bottom suction pipe reducer form the assembly, Fabrication and replacement of suction pipe reducer size of 452 mm X 402 mm to a length of 750 mm. The Reducer to be provided with flange welded at one another end to be provided with loose flange. Each flange to be drilled with 16 Nos of holes for fixing 1" X 5" Bolts and Nuts with washers. e) Replacement of Unserviceable Non-Return Valve assembly: Replacing the non working Suction gate valve by fabricating with pipe bend 45 dia ID -400 mm X length - 250 mm, flange -OD -520 mm, ID - 400 mm, No of holes - 16 nos, Hole dia - 1", gasket, 1" x 4" Bolt, nut, washer - 16 sets. f) Replacing the Ladder top plate: Replacing the ladder top plate by fabrication and replacement of old plates size B-1450mm x L-7500mm x Thk - 8mm g) Replacement of Cutter ladder suction pipe reducer box: Removal of old Cutter ladder bottom suction pipe reducer box assembly , Fabrication and replacement of suction pipe reducer box size i) L-1610mm, B-690mm,thk - 10mm - 2nos, ii) L-1550mm,B-690mm,Thk-10mm - 2nos iii) L-1850mm B-1800mm,Thk-10mm - 1nos iv) L-700mm,B-390mm,Thk-12mm - 1no v) L-790mm,B-690mm,Thk-12mm - 2nos vi) L-700mm,B-690mm,Thk-12mm - 2nos vii) L-1700mm, B-1090mm,Thk-20mm - 2nos viii) L-1840mm, B-770mm, Thk-25mm - 1no | 1 | Job |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054