- Home
- >
- Tender
- >
- Jammu and Kashmir Tender
- >
- Department of Public Works Department
- >
NTID 44328105
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertDesign Manufacturing Supply in Awantipora - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Design Manufacturing Supply " in Awantipora, India.
Public Works Department
Awantipora, Jammu and Kashmir, India
NTID 44328105
- Opening Date : Sat 14th March, 2026
- Closing Date : Fri 13th March, 2026
- ₹ 56030453.00
- NTID 44328105
Key Values: Document Cost: 8500.00 | EMD: 1120609.00 | Estimated Cost: 56030453.00
Tender Description
Design, Manufacturing, Supply, Installation, Testing And Commissioning Of 27 Nos. (06 Passenger Customized 21 No. 08 Passenger 06 No.) (g Plus 3) Mrl Lifts At Transit Accommodation Lethpora, Phase Ii. - Design, Manufacturing, Supply, Installation, Testing & Commissioning of 27 Nos. (6 Passanger Customised 21 No. + 8 Pax 06 No.) G+3 MRL Lifts at Transit Accommodation Lethpora Phase II. Advertised cost=₹560.30 lacs ( inclusive of all applicable taxes with 18% GST)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
1120609.00 -
Document Cost
8500.00 -
Estimated Cost
56030453.00
BOQ Items Total Items : 18 | Total Qty : 14794.3
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply,Installation Testing & Commissioning of (G+3) MRL lift at Transit accommodation Lethpora Pulwama Phase II. The lift shall be suitable for passengers as mentioned below of standard design having speed of 1m/s serving from Ground, 1st, 2nd, 3rd i.e. 04 stops and 04 landings. The elevator shall be of state of art technology, energy efficient drive and all its components/ accessories shall conform to relevant IS standards. (The Defect Liability Period (DLP) of the equipment shall be 02 years. Machine Gearless machine located in the shaft on the top of guiderails. Power Supply 400/415 V (3 Phase AC) Control Simple Collective Selective Control (VVFD regenerative drive) Hoist way dimensions - 1900 mm X 1900 mm (06 Nos:). Landing door Centre door opening in stainless steel hairline. Door opening :Ground, Ist, 2nd, 3rd floor on same side. Car design - Stainless steel in hairline finish. Handrail - Round handrail in stainless steel finish provided on rear wall of car. Alarm button in car operating panel with battery back-up. Automatic operation for car fan. Anti-nuisance (empty car) Anti-nuisance (car call cancellation at direction reversal). Blower fan in car for ventilation. Braille on push buttons Door open and door close buttons in car operating panel. Door closing retries. Door nudging. Emergency light Full load by-pass. Infra red screen for car door. Intercom Provision With Instrument Motor overheat protection. Overload function with audio-visuals indication in car operating panel. Phase failure and phase reversal protection. Automatic rescue device in case of power failure. Attendant control.Car arrival chime on car top/voice synthesizer. LCD dot matrix scrolling display in car operating panel. LCD matrix scrolling display in landing operating panel on all floors. Fireman control. Fireman emergency return. The rates are inclusive of all minor adjustments that may be required in hoistway/pit for completion of the job.Providing & Laying integral Cement based water proofing (Injected type) treatment including preperation of surface and then applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound confirming to IS: 2645. After proper curing apply a second coat of cement slurry admixed with proprietry water proofing compound. The job includes finishing the surface with 20mm thick jointless cement morter of mix 1:4 08 Passenger | 6.00 | C.Job |
| 2 | Supply,Installation Testing & Commissioning of (G+3) MRL lift at Transit accommodation Lethpora Pulwama Phase II. The lift shall be suitable for passengers as mentioned below of standard design having speed of 1m/s serving from Ground, 1st, 2nd, 3rd i.e. 04 stops and 04 landings. The elevator shall be of state of art technology, energy efficient drive and all its components/ accessories shall conform to relevant IS standards. (The Defect Liability Period (DLP) of the equipment shall be 02 years. Machine Gearless machine located in the shaft on the top of guiderails. Power Supply 400/415 V (3 Phase AC) Control Simple Collective Selective Control (VVFD regenerative drive) Hoist way dimensions - 1800 mm X 1800 mm (21 Nos:), Landing door Centre door opening in stainless steel hairline. Door opening :Ground, Ist, 2nd, 3rd floor on same side. Car design - Stainless steel in hairline finish. Handrail - Round handrail in stainless steel finish provided on rear wall of car. Alarm button in car operating panel with battery back-up. Automatic operation for car fan. Anti-nuisance (empty car) Anti-nuisance (car call cancellation at direction reversal). Blower fan in car for ventilation. Braille on push buttons Door open and door close buttons in car operating panel. Door closing retries. Door nudging. Emergency light Full load by-pass. Infra red screen for car door. Intercom Provision With Instrument Motor overheat protection. Overload function with audio-visuals indication in car operating panel. Phase failure and phase reversal protection. Automatic rescue device in case of power failure. Attendant control.Car arrival chime on car top/voice synthesizer. LCD dot matrix scrolling display in car operating panel. LCD matrix scrolling display in landing operating panel on all floors. Fireman control. Fireman emergency return. The rates are inclusive of all minor adjustments that may be required in hoistway/pit for completion of the job.Providing & Laying integral Cement based water proofing (Injected type) treatment including preperation of surface and then applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound confirming to IS: 2645. After proper curing apply a second coat of cement slurry admixed with proprietry water proofing compound. The job includes finishing the surface with 20mm thick jointless cement morter of mix 1:4 Customised 06 Passenger. | 21.00 | C.Job |
| 3 | Electric Works Supply, installation, testing & commissioning of 3 Phase- 45 kVA servo-stabilizer including oil and all allied electrical acessories with earthing. The stabiliser should have following specifications: a) Capacity: 45 kVA, 3-phase unbalanced type b) Input: (100-265) V AC P-N; (180 - 460) V AC P-P c) Output: 415 V 1% - phase to phase d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oil cooled i) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous 4 hours k) Waveform distortions: Nil l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement. | 7.00 | Job |
| 4 | Supply, Installation and Testing & Commissioning of Control Panel enclosed in suitable sized CRC/weather proof Enclosure(SWG16, powder coated) with required IP-Rating to prevent ingress of water and comprising of Bus bar MCCBs, contactors, relays, single phase preventers, earth fault relays, changeover switches, for lifts with following specifications with Earthing. Incomer: 1. MCCB 200A 4P 01 No (36kA) 2. Front Operated Manual Change Over (200A ) 01 No. (4P) 3. MCCB 160A TPN (36kA breaking capacity) of reputed make preferably L&T/ABB/Schneider. 4. 200A Aluminum 4 Pole Bus Bar 01 set 5. Digital Voltmeter with Selector Switch 6. Digital Ammeter with Selector Switch & CT s 7. Phase Indicator Set Outgoing feeders: a) 40A Four Pole MCBs (10 kA breaking Capacity)-(No.- As per requirement) of reputed make preferably L&T/ABB/Schneider. The job is inclusive of the cost on account of concrete foundation/footing for resting of the Control Panel. | 7.00 | Job |
| 5 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required or as per OEM recommendations | 27.00 | Job |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054