- Home
- >
- Tender
- >
- Kerala Tender
- >
- Department of infopark Kerala
- >
NTID 46479727
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Works Including in Thrissur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Works Including " in Thrissur, India.
- Opening Date : Mon 14th September, 2026
- Closing Date : Fri 11th September, 2026
- ₹ 0.00
- NTID 46479727
Key Values: Document Cost: 2950.00 | EMD: 50000.00 | Estimated Cost: 0.00
Tender Description
Corrigendum : Works Including The Supply Installation Testing And Commissioning Of A New Hvac System Including Ahu Ducting Chiller Water Piping And Its Connected Works For The Complete And Satisfactory Operation Of The System.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
2950.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 41 | Total Qty : 1564
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal / vertical air handling units made of 25 mm thick panels consisting of pre plasticized G.I casing of thickness 0.8 mm outside layer and 0.8 mm inside layer with polyurethane foam ( PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5 mm ) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor suitable for 415 +/- 10% volts, 50 Hz, 3 Phase AC supply, drain connections, stainless steel (18 G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges ( 2 nos.) and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. Double skin AHU Units of 6 row cooling coil of 12000CFM | 1 | No |
| 2 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above. Chilled water piping of nominal size - 65mm dia.(50mm thick expanded polysterene | 40 | Nos |
| 3 | Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Butterfly valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/ hot water circulation as specified . Butterfly valve (Manual) 65 mm | 2 | Nos |
| 4 | Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specified Y- Strainer of 65 mm dia (50MM Thick Polystyrene) | 1 | No |
| 5 | Supply, Installation, Testing and Commissioning of following sizes electronic, selfbalancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body. The actuator shall be capable of accepting upto 1 OV DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 16 65mm dia | 1 | No |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054