- Home
- >
- Tender
- >
- Bihar Tender
- >
- Department of Airports Authority of India
- >
NTID 46279420
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertConversion Of Domestic To Inte in Patna - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Conversion Of Domestic To Inte" in Patna, India.
- Opening Date : Wed 26th August, 2026
- Closing Date : Mon 24th August, 2026
- ₹ 36277205.00
- NTID 46279420
Key Values: Document Cost: 1180.00 | EMD: 1088316.00 | Estimated Cost: 36277205.00
Tender Description
Conversion Of Domestic To Integrated Terminal Building By Construction Of Immigration And Customs Counters And Internal Partitions At Jpni Airport Patna
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
1088316.00 -
Document Cost
1180.00 -
Estimated Cost
36277205.00
BOQ Items Total Items : 50 | Total Qty : 15120.2
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | i. Providing, fabricating, supplying and fixing in position Immigration Counter of overall size 2200 mm × 1800 mm × 1200 mm, complete in all respects, as per the "Immigration Counter Plan, Elevation, Sections and Photographs" enclosed with the Tender Documents. ii. The counter shall comprise a bottom framework of 2nd Class Teak Wood of adequate sections and side framework, partitions, shelves, shutters and other structural members made from 18 mm thick Boiling Waterproof (BWP) plywood of approved make and quality. The exposed exterior surfaces shall be finished with 12 mm thick Solid Surface Acrylic of approved make, colour and shade, including seamless joints, polishing and finishing to achieve a smooth monolithic appearance. iii. The working top finished with 12mm thick solid acrylic shall be provided with a partition above the counter made of 12 mm thick clear toughened glass, fixed with approved grade stainless steel clamps, channels or other suitable fixing arrangements, complete as shown in the photographs. iv. The internal surfaces of the counter shall be finished with 1.0 mm thick decorative laminate (suede/gloss finish) of approved make, shade and pattern. The bottom floor surface inside the counter shall be finished with 2 mm thick PVC flooring over 18mm thick BWP ply of approved make and colour, including adhesive, complete. v. The counter shall be provided with a door fabricated from 12 mm thick waterproof plywood finished with 12 mm thick Solid Surface Acrylic on the exposed face and 1.0 mm thick laminate on the internal surface, complete with heavy-duty stainless steel hinges, locking arrangement and all necessary hardware. vi. The item shall include all necessary framing, drawers, shutters, shelves, keyboard tray, wire managers, cut-outs for electrical and data connections, stainless steel screws, SS hinges, telescopic drawer channels, handles, locks, magnetic catches, edge beading, bottom supports, fixing arrangements, fasteners, adhesives, sealants and all other accessories required, all complete. The rate shall also include procurement of materials, fabrication, transportation, installation, polishing, finishing, making good, and handing over the completed work. The contractor shall obtain prior approval of , material samples, colour scheme and finish from the Engineer-in-Charge before commencement of fabrication | 10 | Each |
| 2 | i. Providing, fabricating, supplying and fixing in position Custom Counter of overall size 900 mm × 450 mm × 1050 mm, complete in all respects, as per the "Custom Counter Plan, Elevation and Sections" enclosed with the Tender Documents. ii. The counter shall comprise a bottom framework of 2nd Class Teak Wood of adequate sections and side framework, partitions, shelves, shutters and other structural members made from 18 mm thick Boiling Waterproof (BWP) plywood of approved make and quality. The exposed exterior surfaces shall be finished with 12 mm thick Solid Surface Acrylic of approved make, colour and shade, including seamless joints, polishing and finishing to achieve a smooth monolithic appearance. iii. The working top shall be finished with 12mm thick solid acrylic, complete as shown in the drawing. iv. The internal surfaces of the counter shall be finished with 1.0 mm thick decorative laminate (suede/gloss finish) of approved make, shade and pattern. The bottom floor surface inside the counter shall be finished with 1.0 mm thick decorative laminate (suede/gloss finish) of approved make, shade and pattern, including adhesive, complete. v. The item shall include all necessary framing, drawers, shutters, shelves, keyboard tray, wire managers, cut-outs for electrical and data connections, stainless steel screws, SS hinges, telescopic drawer channels, handles, locks, magnetic catches, edge beading, bottom supports, fixing arrangements, fasteners, adhesives, sealants and all other accessories required, all complete. The rate shall also include procurement of materials, fabrication, transportation, installation, polishing, finishing, making good, and handing over the completed work. The contractor shall obtain prior approval of , material samples, colour scheme and finish from the Engineer-in-Charge before commencement of fabrication | 3 | Each |
| 3 | i. Providing, fabricating, supplying and fixing in position Custom Counter inspection table of overall size 2400 mm × 800 mm × 600 mm, complete in all respects, as per the "Custom Counter inspection table Plan, Elevation and Sections" enclosed with the Tender Documents. ii. The counter shall comprise a bottom framework of 2nd Class Teak Wood of adequate sections and side framework, made from 18 mm thick Boiling Waterproof (BWP) plywood of approved make and quality. The exposed exterior surfaces shall be finished with 12 mm thick Solid Surface Acrylic of approved make, colour and shade, including seamless joints, polishing and finishing to achieve a smooth monolithic appearance. iii. The table top shall be finished with 18mm thick mirror polished granite of approved colour, complete as shown in the drawing. iv. The internal surfaces of the counter shall be painted with synthetic enamel paint with 2 coats. v. The item shall include all necessary framing, stainless steel screws, bottom supports, fixing arrangements, fasteners, adhesives, sealants and all other accessories required, all complete. The rate shall also include procurement of materials, fabrication, transportation, installation, polishing, finishing, making good, and handing over the completed work. The contractor shall obtain prior approval of material samples, colour scheme and finish from the Engineer-in-Charge before commencement of fabrication | 6 | Each |
| 4 | Refer Drg. ID-PT-TB-T-ID-05 & 06 Fabricating and placing in position stamping table and pedestal ( Gents and Ladies) as per approved Drawing , made of 18 mm thick Boiling waterproof ply of approved make having stamping table exterior exposed surface finished with 12 mm thick solid acrylic in any approved equivalent colour combination and pedestal sides having 12 mm thick solid acrylic in any colour combination along with 20 mm thick flamed granite of approved color/shade at top of the pedestal, all complete as per drawing and directions of Engineer In charge.The rate should be inclusive of making complete framework all necessary screws , accessories, fixing or solid acrylic necessary moulding of edges of granite , and solid acrylic , flaming of granite . Shop drawings, material used in work, and their colour shade to be approved by Engineer-In-Charge before execution. | 14 | Each |
| 5 | Refer Drg. ID-PT-TB-T-ID-10 Fabricating and placing in position Inspection table of size 1500 X 600 mm as per approved Drawing , made of 18 mm thick Boiling waterproof ply of approved make with complete exterior finish surface of 12 mm thick solid acrylic in any colour combination and interior finish with 1 mm thick suede/gloss finish laminate of approved colour and pattern with all necessary frames works /stainless steel screws/ SS hinges/telescopic channels for drawers/ handles /locks/bottom support /necessary cutouts /wire manager etc. all complete as per drawing and direction of engineer in charge. The complete work includes construction of frame work with 18 mm Boiling water proof ply, fixing of solid acrylic with necessary moulding of edges,fixing of laminate , drawers, shutters and all necessary hardware, and placing in position of complete counter. Shop drawings, material used in work and their colour shade to be approved by Engineer-In-Charge before execution | 20 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054