- Home
- >
- Tender
- >
- Haryana Tender
- >
- Department of Gurugram Metropolitan Development Authority
- >
NTID 46951357
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertConstruction Of Service Road D in Multi city - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Construction Of Service Road D" in Multi city, India.
Gurugram Metropolitan Development Authority
Multi city, Haryana, India
NTID 46951357
- Opening Date : Fri 16th October, 2026
- Closing Date : Thu 15th October, 2026
- ₹ 72575980.00
- NTID 46951357
Key Values: Document Cost: 1180.00 | EMD: 1451520.00 | Estimated Cost: 72575980.00
Tender Description
Construction Of Service Road Dividing Along Sector Dividing Road 99/102 (asset Id 138) And All Other Works Contingent Thereto.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
1451520.00 -
Document Cost
1180.00 -
Estimated Cost
72575980.00
BOQ Items Total Items : 7 | Total Qty : 5976
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | - Supply installation and Testing of IP - 67,LED flexi ble LED Strip light_ 36 W Havells Cat No: FLEXISTRIP 36 W or Equivalent to Philips or Wipro | 1854 | Metre |
| 2 | SITC of highquality group control enabled integrated LED Street Light with a minimum system lumen of 19600 lm and system wattage 140W with a minimum system efficacy of 140 lumen/watt . The LED used shall have CCT of 5700K, SDCM must be less than or equal to 5 and CRI must be greater than or equal to 70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure diecast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” and shall not be bolted/welded/mechanically joined to the luminaire housing to ensure robust design. The luminaire shall have polycarbonate front cover/lens. The name of the brand should be embossed/engraved and should not be mentioned using sticker/screen printing. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. The luminaire LED shall have declared Lifetime of 75K hours@L70. Product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 and impact resistance shall be IK10. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 10 KV/5KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 5KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be SMD type only and shall be from either, APT Electronics and CREE make or equivalent. The Driver should be asphalt potted and should be a BIS approved driver. The driver shall be replaceable. The driver shall have operating voltage of 120V to 270V, PF=0.95 @full load, THD=10% @ full load, In-built surge protection of 4KV. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown/cut-off at less than 90V and 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 and IEC 61000-3-2. The driver shall be EMI/EMC Complied as per EN55015/CISPR15. The luminaire shall be able to give Constant Light output (CLO) between voltage range of 140V to 277V. The luminaire driver and it’s SPD shall be of the same make/manufacturer/Lighting company as that of LED luminaires. Luminaire manufacturer must have Inhouse NABL accredited lab to conduct LM79, Type test as per IS10322, `FAT` before dispatch as per IS 10322 and IK Test. The detailed specifications shall be as per tender......... | 90 | Each |
| 3 | S/E of make Hot Dip Galvanized Bracket 1500mm overhang made off 3.25 thickness sheet 50mm dia (ID) M.S pipe welded to 450mm long Octagonal canopy with an angle of inclination of 105° the vertical the top end of canopy should be closed made of M.S sheet of 16 swg. 25mm dia M.S pipe 2mm thickness sheet should be welded diagonally at top side of bracket should be as per design attached single Arm Bracket). | 90 | Each |
| 4 | S/E of underground cable loose in existing pipe or trenches complete with n/connections. 25mmsq x 4 core (unarmored) | 1790 | Metre |
| 5 | SITC of feeder Pillar/street Light Panel with 3phase/12KW Load/24Hr. Digital Timer/ 65TP Contactor/ 63 TPN MCB with all civil arrangement | 6 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054