- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of ZILLA PARISHAD
- >
NTID 43418298
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertConstruction Of Cc Road From B in Malda - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Construction Of Cc Road From B" in Malda, India.
ZILLA PARISHAD
Malda, West Bengal, India
NTID 43418298
- Opening Date : Wed 21st January, 2026
- Closing Date : Mon 19th January, 2026
- ₹ 6177470.00
- NTID 43418298
Key Values: Document Cost: 0.00 | EMD: 123560.00 | Estimated Cost: 6177470.00
Tender Description
Construction Of Cc Road From Bansaria Pmgsy Road To Bansaria Shamsan. Mouza Bansaria, Jl No 111 In Mahendrapur Gp Under Harishchandrapur-i Dev. Block, Malda. Sl.no-10
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
123560.00 -
Document Cost
Refer Documents -
Estimated Cost
6177470.00
BOQ Items Total Items : 5 | Total Qty : 3540.58
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m,transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works) | 2460.000 | M3 |
| 2 | Granular Sub- Base with Graded materials :- Construction of granular Sub- base bt providing graded material , mixing by mix in place method with Rotavatotor at OMC, spreading in uniform layers with motor grader on prepared surface in proper grade and camber , Compacting with vibratory roller to achieve the desired densoty , including lighting, guarding , barricating, including cost of all materials, machinary , toolsand plants including cost of quality controla complete as per clause401 of Specifications for Road & Bridge of MoRT& H) 5th Revision | 361.800 | M3 |
| 3 | Providing and laying Design Mix Concrte for Plain/ reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggreates of appropriate nominal size and grading, fine aggregate(sand) conforming to proper grading Zone , both of approved qua;ity and cement, as necessary, including labour, cost and carriage of all materials and including prepararation of design mix, approval of the same by the E.I.C and cost for quality control, sampling, testing etc. all complte but excluding cost of labour and materials for form work & reinforcement works (d) M-30 Grade: (i) Using concrete mixer | 542.700 | M3 |
| 4 | S/F/Fand driving of Eucallyptus Billah piles with Cement Bags filled with Earth Drum Sheet walling 1.40m(av) high on Sal-bullah/Eucalyptus piling 10cm dia and 3.25 m long driven 1.75m (av) below G.L. and 75cm centre to centre including fitting fixing 3 nos of half bullah pieces (fropm 10cm dia) and drum (empty bitumen) sheet (approved condition) of height 1.5 m, cutting and straightening drum sheet (each joint must have lap length of mim.50 mm) including cost of necessary nails, bolts, nuts etc and providing 2 to 3 mm long half bullah ties of 10cm dia a 2.25 m centre to centre fixed with 10 cm dia bullah posts driven 1.5 m berlow G.L. including cost of all materials and one coat of coal tarring to all bullah etc complete as per direction (i) Using Eucalyptus bullah | 175.000 | Mtr. |
| 5 | Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).. | 1.080 | M2 |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054