- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 46403211
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertBalance Work Of Improving Disa in Nagrota - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Balance Work Of Improving Disa" in Nagrota, India.
Public Works Department
Nagrota, Himachal Pradesh, India
NTID 46403211
- Opening Date : Tue 25th August, 2026
- Closing Date : Tue 25th August, 2026
- ₹ 0.00
- NTID 46403211
Key Values: Document Cost: 500.00 | EMD: 24050.00 | Estimated Cost: 0.00
Tender Description
Balance Work Of Improving Disaster Resilience Of Lifeline Building Of Govt. Senior Secondary School (boys) At Nagrota Bagwan Distt Kangra (hp) (sh-providing And Fixing Work In Doors, Windows And Aluminium Work Etc)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
24050.00 -
Document Cost
500.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 23 | Total Qty : 3118.31
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and fixing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. | 0.4 | Per cubic metre |
| 2 | Providing 40x5 mm Forty into five millimetre) flat iron hold fast 40 cm (Forty centimetre) long including fixing to frame with 10 mm (Ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement : Three coarse sand : Six graded stone aggregate 20mm (Twenty millimetre) nominal size complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. | 16 | Each |
| 3 | Providing and fixing 35mm (Thirty five millimetre) thick shutters of second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. | 37.09 | Per square metre |
| 4 | Providing and fixing coloured coated/ anodised aluminium work for doors, windows, ventilators and partitions in frame work with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. | 479.4 | Per Kilogram |
| 5 | Providing and fixing coloured coated/ anodised aluminium work for doors, windows, ventilators and partitions in shutter work with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. | 962.38 | Per Kilo gram |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054