- Arc Of Electrical Material in Khetri - Complete Tender Details

- Arc Of Electrical Material. - Electrical Work :, Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (uv Stablization Report Submitted For Uv Cover ) /toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy >=125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety , Power Factor >0.95 Driver Efficiency >85% ,thd(i) 10% Humidity 10% To 90% Rh Working Temp -5c To 45c . Driver Current 750ma. The Luminaire Shall Be Bis Certified And Trade Mark Certified. Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened , Cri >70 And Cct 5700k +355k. Surge Protection Shall Be Min 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/name Engraved/embossing On Die Cast Housing To Allow Traceability/authenticity. Fixture Shall Be As Per Is 10322 Complianced.oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (lm79/lm80) Certificate/ Report With Liable Warranty Of Product/accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Led Street Light Fixture With Minimum Lumen Output 5600 Lm, Supplying And Drawing Of Xlpe Insulated Lt Aerial Bunched Aluminium Conductor Cable Confirming To Is 14255/1995 And Is 398 (pt-4)/ 1994 And As Per Discom Specs. On Existing Cross Arms Through I Hook With All Necessary T&p Required Including Binding And Twisting Etc. Complete In All Respect As Required. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . 1 X 25 Sq. Mm. + 1x25 Sq. Mm. (insulated), Supply And Fixing Of 11 Kv Pin Insulator Confirming To Is:731:1971 With Latest Ammendment On Existing Bracket Including All Accessories Like Ms Forged Hot Dipped Gi Pin Confirming To Is 2486(part-i)/1993 & Is:2486 (part-ii)/1989 With Latest Amendment, And As Per Latest Discom Specs. Etc. As Required. All As Per Pre Approved By Engineer In-charge.for Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr, Sitc Of Ip-42 And General Construction Confirming To Is:8623 : 1993, Wall/ Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel As Specifications And Other Parameters Required As Per Point (a) ,(b), (c),(d), (e), (f), (g), (h) As Below:-(a)thickness Of Crca Sheet Shall Be 2.0 Mm, Cable Alley Compartments Having Concealed Hinged Type Doors With Key Type Lock With / Without Detachable Extension Type Structure. Removable 3 Mm. Thick Sheet Steel Gland Plates With Appropriate Size Of Knockouts For Cables Shall Be Provided(b)complete Panel Shall Undergo A Process Of Degreasing, Water Rinsing, Activation, Derusting, Pickling In Acid Bath, Phosphatising & Shall Be Subjected To Nine Tank Process And Then Powder Coated With Approved Shade Of Minimum 70 Microns On Both Side Of Panel. The Panel Having Pe Foam/ Neoprene Rubber Gasket Of Not Less Than 3mm Thickness ,required Hardware , Concealed Hinged Door With Key Type Locking Arrangement For Equipment/switchgear Earthed With 2.5 Sq.mm Braided Copper Wire.[c) Interconnection Between Bus Bar And Switchgears /cable Shall Be Rigidly Supported And Made Out By Flexible Copper Wires (up To 63 Amp ) And By Solid Bus Bar (>63 Amp ) . Control Wiring Will Be Carried Out With 1.5 Sq.mm, Earth Wire With 2.5 Sq.mm And Ct With 2.5 Sq.mm Flexible Copper Wire Only. All Joints / Interconnections Of Copper Bus Bar Shall Be Dully Tinned . Clearance Between Main Bus Bar And Risers / Metal Parts Shall Be At Least 10 Mm Additional To Width Of Bus Bar Bus Bar Is Insulated By Heat Shrinkable Sleeves . Earth And Neutral Bus Bar Shall Be Half Of The Size Of Phase Bus Bar. ( Cost Of Bus Bar / Flexible Wire For Interconnection Between Main Busbar And Switchgear Is To Be Paid Extra )(d)wiring Between Components Within Switchgear And Incoming / Outgoing Cable Shall Be Done Through The Terminal Block Only. Direct Connection Shall Not Be Permitted. Each Terminal Block Shall Be One Piece Moulded, Barrier Type, 650 Volt Grade, Complete With Washers, Heads, Studs With Two Nuts And Identification Strips And Shall Have Adequate Continuous Current Rating. For Tap-offs, Adjacent Terminals With Shorting Strips Shall Be Used. 10% Spare Terminal Blocks Shall Be Provided. Wire Identification On Marking Strip Shall Correspond To The Designation Of The Wiring Diagrams. All Wire Terminals On The Equipment Shall Also Be Marked With Designation Corresponding To Those Of The Wiring Diagram.(e)all Wiring Shall Be Enclosed In Plastic Channels And Neatly Bunched And Closed In Metering Chamber, Wiring Between Terminals Of Various Devices Shall Be Point To Point (no Wire Splitting Or Tee Connections) With Wires Neatly Trucked Along The Back Of The Panels, Adequately Supported To Prevent Sagging.(f)floor Mounted Panel Shall Be Mounted On Base Frame Of Ismc Channel Size 100 X 50 X 5 Mm ( To Be Paid Extra )(g) Tests: The Insulation Resistance (with 1000 V Megger) And High Voltage Power Frequency Test (by Applying A Voltage Of 2.5kv For One Minute) Shall Be Measured Between Phases, Between Phase And Neutral And Between Phase And Earth. Both Before And After High Voltage Power Frequency Test. The Insulation Resistance Shall Not Be Less Than Three Megaohm. Ct Secondary Current Injection Test Shall Also Be Carried Out.(h) Only Outer Surface Area On All Sides Shall Be Measured & Panel To Be Fabricated Only From Cpri Approved Fabricator Only (cpri Test Certificates To Be Submitted)all As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr ., Providing & Fixing Of Ac Operated Heavy Duty 230 /440 Volt Power Contactor As Per Pwd Specification For Electrical Works, Isi Marked Is/iec 60947-4-1 : 2000 Having Provision Of Mechanical Interlocking, Auxilary Contacts, Din Rail Mounting Type Including Making Connections, Testing Etc. As Required. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . 250 Amp, Sitc Of 3 /4 Pole Current Limiting Moulded Case Circuit Breaker (mccb) Made Of Flame Retardent & Heat Resistant Material Having Following Current Rating, Short Circuit Breaking Capacity At 440/415 V, 50 Hz; O/l & S/c Settings , Conforming To Is/iec 60947 P -2 :2003 With Front Face And Centralised Adjustable, Trip Free Mechanisum, True Contact Position Indicator, Line Load Interchangeability, Designed For Both Horizontal & Vertical Mounting Without Any Adverse Effect On Electrical Performance, Suitable For Operation Upto 55 Degree And Without Derating Upto 40 Degree, Pollution Degree 3, Having Positive Isolation Capability, Push (test) To Trip, Trip Time Less Then 10 Ms Under S/c Condition, Breaking Capacity Ics = 100% Icu. U Imp =8 Kv, Rated Insulation Voltage 690 V. Provision For Uvr , Shunt Trip , Earth Fault Trip, Door Interlock, Pad Lock & Rotary Handle , Including Making Connections Etc. As Required.oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Certificate Before Execution All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 250 Amp , 50 Ka, Providing & Fixing Of 110/220 V, Unibody Led Indicating Lamp Iec 60947 With Integral Circuit, Ip 65 Above Panel & Ip 20 Terminal Block, Approx. Body Dia For Panel Not Less Then 20 Mm, Length Min. 50mm, Front Led Cover Dia Min. 29 Mm, Contact Material Phospher Bronze For Led, Pcb Contacts Shall Be Of Brass (tin Plated), Impulse Dielectric Tested For 2.5 Kv, Rated Insulation Resistance Shall Be 100 M Ohm At 500vdc Including Connection Etc. As Required. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Red/yellow/green Colour, Blue / White Colour, Providing & Fixing Of Mechanical / Digital Time Switch Having Following Day / Week Programme And Minimum 100 Hours Reserve And Ac1 Rating Of 16-20 Amperes Including Making Connection, Programming Conforming To Iec 60730-1 And 60730-2-7 Etc. As Required. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . One Day Reserve (analog Type ), Supplying And Fixing Of Aluminium (iec 60105 Iso 209-1,2) / Copper (iec 60028) Bus Bar By Means Of Smc / Dmc Type Insulator With Standard Short Circuit Withstand Capacity , High Tensile Nuts And Bolts Spring Washers In Existing Panel Including Bending , Cutting In Required Shape And Size And Colour Coding With Heat Shrinkable Pvc Sleeves. All As Per Pre Approved By Engineer In-charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Electrolytic Grade Aluminium Bus Bar 6010 Grade, Supply And Erection Of P.c.c. Pole As Per Rec Manual No 15/1979 (ammended Upto Date) And As Per Latest Discom Specifications With Factor Of Safety 2.5 Including Excavation Of Pit Upto Pole Planting Depth 1/6th Of Pole Length. And Back Filling With Stone Aggregate/boulders And Soil By Ramming And Watering Etc Complete As Required. All As Per Pre Approved By Engineer In-charge.for Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 9.0 Mtr Long Pcc Pole Of 400 Kg Working Load, Supply And Erection Of Gi Stay Set Confirming To Pattern-1 Of Bs:16/1974 And As Per Latest Discom Specifications Complete With Stay Rod With Anchor Plate Fitted With Cast Iron Cross Head And Steel Bow, In Cement Concrete 1:3:6 Including Excavation Of Pit-re-filling Etc Complete As Reqd. All As Per Pre Approved By Engineer In-charge.for Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Stay Set Of Dia 20mm, 2.4m Long Stay Rod And Anchor Plate 380 X 380 X 4.0 Mm, Supply And Fixing Of Following Lt Supporting Accessories With Nut Bolt & Clamps Made Out As Per Standard Discoms Specifications With Two Coats Of Red Oxide And Two Coats Of Aluminium Paint Etc. As Required. All As Per Pre Approved By Engineer In-charge.for Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Dead End Clamp With Eye Hook & Pole Clamp