- Home
- >
- Tender
- >
- Gujarat Tender
- >
- Department of Gujarat Industrial Development Corporation
- >
NTID 46991601
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertApplying Thermoplast Patta For in Valsad - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Applying Thermoplast Patta For" in Valsad, India.
- Opening Date : Refer Documents
- Closing Date : Thu 15th October, 2026
- ₹ 9782777.00
- NTID 46991601
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
97828.00 -
Document Cost
2832.00 -
Estimated Cost
9782777.00
BOQ Items Total Items : 2 | Total Qty : 9963.56
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Road marking with hot applied thermoplastic paint with reflectorising glass beads road surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/edge line/cut patta. The white color marking should provide liminance corfficient on cement road shall be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during service life during the day time. The marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid residtance as mentioned in the section-15 of IRC 35-2015. Warranty for the retro reflectivity should be two year. | 6408.000 | Sqm |
| 2 | Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer. | 3555.560 | Nos. |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054