- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 43870350
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertAnnual Maintenance Plan For Th in Chamba - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Annual Maintenance Plan For Th" in Chamba, India.
Public Works Department
Chamba, Himachal Pradesh, India
NTID 43870350
- Opening Date : Fri 13th February, 2026
- Closing Date : Fri 13th February, 2026
- ₹ 3037727.00
- NTID 43870350
Key Values: Document Cost: 1500.00 | EMD: 60755.00 | Estimated Cost: 3037727.00
Tender Description
Annual Maintenance Plan For The Year 2026-27 On Thakoli To Dungru Road Km. 0/00 To 4/285 (village Road)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
60755.00 -
Document Cost
1500.00 -
Estimated Cost
3037727.00
BOQ Items Total Items : 4 | Total Qty : 7121.01
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and laying bituminous macadom with 40-60 TPH (forty- sixty tonne per hour) batch type HMP producing an average output of 75 (seventy five) tonnes per hour with using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% (Four point five ) per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignmernt , rolling with smooth wheel , vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No 505 complete in all respect and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government . | 32.47 | Per Cubic Metre |
| 2 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two hundred seventy five killograme) per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 6493.73 | Per Square Metre |
| 3 | Providing and laying 30mm (Thirty millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity Grade-ten) @ 5.50% (five decimal five zero percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government. | 194.81 | Per Cubic Metre |
| 4 | Providing and laying of hot applied thermoplastic compound paint 2.5mm (two point five millimeter) thick including reflectrosing glass beads @ 300 gms (three hundred grams) per square meter area , thickness of 2.5mm (two point five millimeters) of surface applied glass bead, all by road marking machine. The finished surface to be level, uniform and free from streaks and holes, complete as per IRC:35 and MORTH technical specification clause 803.4 including carriage of materials within all leads and lifts and other incidental.The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 400.00 | Per Square Metre |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054