- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of HIMACHAL PRADESH UNIVERSITY
- >
NTID 45430192
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertAddition And Alteration Of Att in Shimla - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Addition And Alteration Of Att" in Shimla, India.
HIMACHAL PRADESH UNIVERSITY
Shimla, Himachal Pradesh, India
NTID 45430192
- Opening Date : Sat 20th June, 2026
- Closing Date : Fri 19th June, 2026
- ₹ 2603613.00
- NTID 45430192
Key Values: Document Cost: 2000.00 | EMD: 46600.00 | Estimated Cost: 2603613.00
Tender Description
Addition And Alteration Of Attic Floor Of Uit Department To Accommodate Faculty Members By Providing Aluminum Partitions, Ceiling Vitrified Tiles Flooring Wall Paneling Cupboards Polishing Including Painting And White Washing In Hp University, Shimla - Addition and Alteration of attic floor of UIT Department to accommodate faculty members by providing aluminum partitions, ceiling, vitrified tile flooring, wall panelling, cupboards, polishing including painting and white washing in HP University, Shimla-5.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
46600.00 -
Document Cost
2000.00 -
Estimated Cost
2603613.00
BOQ Items Total Items : 28 | Total Qty : 6946.3
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : a) For fixed portion i) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 927.21 | kg |
| 2 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) ii) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 165.82 | kg |
| 3 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. a) Pre-laminated particle board with decorative lamination on both sides | 55.08 | sqm |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) | 67.38 | sqm |
| 5 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. a) With stainless steel cover plate minimum 1.25 mm thickness | 19.00 | nos. |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054