Supply Of Diesel Generators- Dg Sets

MINISTRY OF DEFENCE

2x900 Kva Dg Sets Along With Accessories At Lube Complex Trombay

Indian Oil Corporation Limited

supply and commissioning of lab equipments - searl's conductivity apparatus with copper & steel rods 25 cm length 4 com. diameter complete with all accessaries, rheostat different ohm capacity 50?, 100?, 150? capacity, electronic intercom set with 12 lines, calculator different type, digital multimeter, analog multimeter , decade resistance box constantan coils, energy meter single phase(standard), power factor meter dynamometer type, rheostat sliding rheostats wound with eventy exidised iron free nickel copper on vitreous enamelled round steel tube 150 ohms 2 amps, variabel indusctor single phase, 50 hz, 250 v, 2.5 kvar continously variable., q meter frequency 0-30 frequency 0-30 mhz q 0-5001, lcr meter (digital) 3.5 digit display capicitance 0-20000 microfarad indiustance 0-200 henry resistance 0-20 m ohms ac operatede 250v 50 hz, lcr/q bridge capable of measuring rasistance industance & capacitance of range 8 amp 0.012-10 m ohms 4-10000h 0.5 ouci farad to 10 f, energe meter three phase induction 4 wire industrial grade 50hz 10a 440v, tranceformer single phase core type 230/110v 1kva 50 hz as per is code 3156 : 1992, universal shunt 0-75a, current tranceformer 10/25/50/5a as per is code 4201/1967 & 2705/1992, potential transformer 10 va(415/110v as per is 4201/1967 and 2705/1981 as per is code 3156:1992, stain guage[ using temp sinsor]rtd pt 100 range 0 to 200 deg centi, mode on/off, relay-o/e/n, 5 amp accurancy +1%, maxwells bridge kit consisting of p=r3 & q=r4 consist of standard dial of 3 dials 10x10 & 1000x10 ohms r2 consist of 3 dials of 0.01x10, 0.1x10 & 1x10 ohms, l1=10mh to 100 mh, sine wave oscillator, audio null detector, supply 230 volts, 50 hz., ammeter: dynamomeeter, type m/c, 150 mm uniform scale:f as per is code 1248 part-2: 2003, ammeter- moving iron type portable moving iron permanent magnet, 150mm uniform scale : as per is code 1248 part-2 :2003, voltmeter: dynamometer, type m/c 150 mm uniform scale: as per is code 1248 part-2: 2003, battery charge 12 v silicon bridge rectifier ac input 230v, dc output suitable for charging 6v and 12v batteries provided with voltmeter 2-20v amd ammeter 0-5a, d.c. motor generator set two indentical 220v, 1kw 1500 rpm. compound d.c. machines with all terminals of armature, series field, shut field separately mounted for independent connections. d.c. motor starter, field control rheostat suitable for above machines brushes, commutator should be visible for study purposes., 3 phase synchronous motor (induction start) rating 3kw, 3 phase, 1500 rpm, 50hz 415 v a.c supply with d.c exciter mounted on the shaft of motor with suitable starter., 3 phase variable inductive loading unit rating 415v, 50hz, 0-10 amps., "3 phase variable capicitive loading unit rating 415v, 50hz, 0-10 amps., a. start/delta automatic, b.direct on line", static speed control unit for 3 phase induction motor 3kw, 415v, 50hz, 0-1500 rpm., capacitor start single phase induction motor 230v, 50hz, 4-poles, 1375 rpm, 550 watts. : as per is 996, 2009, phase sequence indicator(rotary) 3 phase, 415v, 50hz : as per is code 1248 part-5 : 2003, phase sequence indicator(indicating type) 3 phase, 415v, 50hz : as per is code 1248 part-5 : 2003, galvanometer center zero respinse time 1.8 sec., synchroscope- portable 230 v, 50hz: as per is code 1248 part- : 2003, stop watch least count 0.01 sec., stop watch(digital) led, 3 phase squirrel cage induction motor rating 415 v, 50hz, 1440 rpm 3kw with star/delta starter, automatic y/d, starter & with single phase preventor., audio oscillator-- frequency range- (1hz-50khz) function/output wave from- sine wave, o/p ameplitude/ voltage-20v peak(variable), short circuit protection, output attenuation-2 step attenuater, digital display oerating voltage- 220±10%, accessories & operating mannual, analog multimer-- sensitivity- 20k. ohm/ volt, resistance measurement in 3 or 4 steps max ac/dc volt- 1000 volt ( in 3 or 4 steps), current(ac/dc)- upto 5 amp ( in 3 or 4 steps), acuracy- ±1 % protection- overvoltage/ overcurrent., digital multimeter --- functions - resistance, ac/dc voltage, ac/dc current, ac/dc current, ac/dc voltage-1000 volt ± 1 % resistance range- in 3 or 4 steps/ automatic, ac/dc current- upto 5 amp ( in 3 or 4 steps) 3½ digit display, over load protective, autopower off & buzzer/beep facility should be provided., regulaed power supply-- input voltage- 220±10%, 50 ht, output voltage-0- 30v( variable using coarse & fine control), output current-1 amp(max.) over load/short circuit protection, digital display, multi output power supply--- operating voltage- 220±10%, 50 ht, output voltage-(a) (0- 30) variable using coarse & fine control, (+12±1%), 5v±1%, output current-2 amp(max.)overload/short circuit protection, overload indication, by beep or by flash digital display, power supply--- operative voltage- 220±10%, 50hz, output voltage- (0-300v) variable, output current-2 amp (max), overload/short circuit protection, overload indication digital display, r.f. signal generator--- function- am/fm, carrier (100mhz), operating voltage- 220v ± 10%, 50 ht, internal/external modulation fascility, am/carrier output-upto 10v (variable), fm output-upto 10v (variable), function generator-- operating freq. range-(0.1hz-10 mhz) in different steps, functions-sine, square, trangular, ramp, max. output amplitude-20 v p-p(variable), output attenuator-two step, operating voltage- 220v±10%, 50 hz, short circuit protection, display-lcd display, a.c. millivolt/ microvolt meter--- operating range- 10?v-500 mv(with function& range selection switch), over load protection, digital display, operating voltage- 220 v ± 10%, 50hz, output audio power meter: frequency range 20 cycles/sec to 20 kcycles/sec. power measurement 50 mw to 100w, load impidence 4 ohm, 8 ohm, 16 ohm, output in watts and desibels, digital display, d.c. voltmeter/d.c. milliammeter/d.c micrometer(suitable range), audio signal generator 20hz -50 khz, frequencey range - ( 1 hz - 50 khz) function/output wave form- sine wave, o/p amplitude/ voltage - 20v peak to peak(variable), short circuit protection, output attenuation - 2 step attenuater, digital display, operating voltage - 200v + 10%, accessories & operating mannual, high quality stereo amplifier, 60w per channel, distortion less than 1%, operation-mains and battery, detachable speakers, bass, treble and balance control, digital a.c. voltmeter true rms type operation range - 10µv - 500mv (with function & range selection switch), over load protection, digital display, operation voltage - 220v + 10%, 50 hz, distortion factor meter: frequency range hz to 100 khz, measurable power upto 50w, distortion level --0.5% to 100%(fsd), provision to observe wave form and distortion on a cro, analog multimeter with 20 k ohm /volt senstivity- 20 k. ohm/volt, resistance measurement in 3 or 4 steps, max ac/dc volt - 1000 volt( in 3 or 4 steps), current (ac/dc) - upto 5 amp ( in 3 or 4 steps). accuracy - + 1, protection - overvoltage/overcurrent, table type digital multimeters : functions- resistance, ac/dc voltage, ac/dc current, frequency and cap. measuring facility, 4.5 digit display, mains/ battery operated, auto polarity, over load protection and indication, professional quality pattern generator: colour and black & white patterns, 4-6 different patterns, multichannels electronic, tuner(vhf/uhf, colour, constrast, and other controls, standard rf signal generator (am/fm) frequency range 0 - 110 mhz, 2 to 3 step attenuator, output- am/fm/carrier, output level 10mv to 20v (peak to peak value), digital display, internal/external modulation facility, frequency and output level controls., regulated power supply input voltage - 220 v + 10%, 50ht, output voltage - 0-30v(variable using coarse & fine control), output current - 1 amp (max.), over load/ short circuit protection, digital display, r.f. signal generator(am), function - am/fm, carrier, operating voltage - 220v + 10%, 50ht, internal/external modulation fascility, am/carrier output- upto 10v (variable), fm output- upto 10v (variable), rf signal distribution euqipment alogng with associated connnector and cables., gen. purpose multimeter(analog) sensitivity- 20 k.ohm/volt, resistance measurement in 3 or 4 steps, max ac/dc volt- 1000 volt (in 3 or 4 steps), current (ac/dc)- upto 5 amp (in 3 or 4 step), accurancy - ±1%, protection - over voltage/ overcurrent, digital multimeter 4.5 digit functins- resistance, ac/dc voltage, ac/dc current/ ac/dc voltage - 1000 volt ± 1%, resistance range- 3 or 4 steps/ automatic, ac/dc current -upto 5 amp (in 3 or 4 steps) 3½ digit display, over load protection, autopower off & buzzer/beep facility should be provided., transistor power supply (+,-,comm.) 0-30 v/1 a variable input voltage - 220v±10%, 50ht, output voltage - 0-30v(variable using coarse & fine control), output current - 1 amp(max.), over load/short circuit protection, digital display, unregulated power supply 0-30 v; 1 a : output 0 to 30 volt, output current 1 amp, course/fine controls to select the output, overload/ over voltage protection, a.f. signal generator, frequency range- ( 1 hz - 50 khz) function/output wave form- singe wave, o/p amplitude/voltage - 20v peak to peak (variable), short circuit protection, output attenuation - 2 step attenuater, digital display, operating voltage - 200v± 10 %, accessories & operating mannual, rf signal generator, frequencey range - 100 khz to 150 mhz in seven steps, function - am/fm, carrier -100 khz, operating voltage - 220v ± 10%, 50ht, internal/external modulation fascility, am/carrier output - upto 10v (variable), fm output - upto 10v (variable)v, std. signal generator : )am/fm) frequency range 0 - 110 mhz, 2 to 3 step attenuator, output-am/fm/carrier, output level 10mv to 20 v (peak to peak value), digital display, internal/external modulation fascility, frequency and output level controls., rlc/q meter bridge ac/dc bridge? digital display, test frequency 100hz to 100 khz, auto range measurements, insertion type component measurement facility, mains/battery operation, functions lrc, & q measurements, electronic multimeter, digital multimeter 3.5 digit - diplay dc viltage 0- 1000 v in 5 steps ac voltage 0- 750 v in 5 steps resistance 0-20 m ohm in 6 steps dc 0-10a in 6 steps ac 0-10a in 6 steps power supply 9 v., laboratory dc power supply (220v) static converter input from 3 phase 50 hz, 415 volts ac , output rating of 200-260v, 50 amps, continously variable., pc card set, spike buster, tool kit, cutting binding and stiching equipment, circular saw machine, bench tool grinder, drilling machine, sheet bending machine, drilling machine : piller type 12 mm capacity, metal shear: lever type, fly press, pipe threading machine, guilatine shear, seaming and swaging equipment, bench vice 8" with work bench, marking table with scriber, surface plte, package-2 (minor equipments & consumable items), "loading rheostat single phase, a. 240 v, 2.5 kw, trolley type resistance type, b. 240 v, 6 kw insteps of 0.25", lamp load 3 phase 415 v, 6 kw, capacitor bank 415 v, 0-10 a, 50 hz trolley mounted, capacitors :- (a) 2.5 ?f, (b) 36 ?f electrotype, (c ) 2.5 ?f electrotype, murcury vapour lamp m.l. type, 125 w, 230v, 50hz, murcury vapour lamp 125 w, 230v, 50hz, ac supply complete with choke, lamp holder and power factor capacitor, sodium vapour lamp 125 w/250w, 230v, 50hz with choke, measuring tape pocket measuring tape of steel spring return device. flexible graduated in metric readings, 2 meter long., screw driver mains voltage tester suitble upto 400v overall length 180mm., "file set, a. flat smooth cut, b. flat second cut, c. half round, d. half round smooth cut, e. round second cut, f. round smooth cut, g. squre second cut, h. squre smooth cut, i. triangular cut", latter stamp set, box spanner set, bearing pullers, electric appliances(toaster, water cooler), hv cable section and jointing materials, demo boards on fuses, switches, conductors, wiring boards (wooden), switch 16,8,24 ports, all accessories related to networking, different antenna: mf,hf,vhf,uhf & microwave, different type of microphone set: crystal, carbon, lavelier, cordless, collar, piezo electric, wood turning lathe, doal machine.

Director Technical Education

Signal Generator

ISRO SATELLITE CENTRE

Annual Maintenance Contract Of 106 Nos. D.g.sets (kirlosker Make) Of Tsk Division For A Period Of 2 (two) Years.

NORTH EAST FRONTIER RAILWAY

Repair/overhauling Of Dg Sets And Connected Items Installed At Various E/m Installation Under Ge (utility) Bathinda Mil Station

Military Engineer Services

Supply Of Power Generators And Portable Generator

MINISTRY OF RAILWAYS

Notice Inviting Expression Of Interest (eoi) For Annual Contract For Cleaning/descaling Of Cooling Equipment Of Dg Sets And Air Compressors At Mpd As Annual Maintenance Contract

Industrial Training Institute

Repair Maintenance Of Dg Sets And Laundry Plant And Allied Works Installed In Chnc Area Under Ge Utilities Udhampur

Military Engineer Services

Provn Of 100 Kva Generator Set Led Lightselectric Connections, Battery Charger Dc Battery Bank 06 Geyser And Replacement Ofceiling Fans At Mil Stn Ratnuchak Under Ge Kaluchak

Military Engineer Services