Tender for Rajasthan State Road Development And Construction Corporation Limited - NTID 29925884
Rajasthan State Road Development And Construction Corporation Limited
Jodhpur, Rajasthan, India
NTID 29925884
- Opening Date : Fri 2nd December, 2022
- Closing Date : Thu 1st December, 2022
- ₹ 1295000.00
- NTID 29925884
Shifting For Ht Cable In Yoga And Naturopathy College And Hospital At Rau, Jodhpur
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
25900.00 -
Document Cost
590.00 -
Estimated Cost
1295000.00
BOQ Items Total Items : 7 | Total Qty : 1604
# | Item | Quantity | Units |
---|---|---|---|
1 | Providing & Laying XLPE insulated three core Armoured Aluminium cable for working voltage 11 K.V.(E) confirming IS :7098 P - 2 with H4- Grade electrolytic aluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | 0.00 | Each |
2 | 3 core 185.0 Sq.mm | 600.00 | Mtr |
3 | Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit suitable for 11 KV / 33 KV (Earthed) cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | 0.00 | Each |
4 | 11 KV Straight Through Joint Kit | 0.00 | Each |
5 | 3 core 120/150/185 Sq.mm | 4.00 | Each |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane