“Help Us” to get most relevant tenders
Popular Keyword
Tender for Military Engineer Services - NTID 33170143
Military Engineer Services
Shillong, Meghalaya, India
NTID 33170143
Opening Date : Tue 3rd October, 2023- Closing Date : Sat 30th September, 2023
- ₹ 5000000.00
- NTID 33170143
Repair/maint Of Pss Tanks In Various Locations Under Ge Narangi
Key Values: Document Cost: 500.00 | EMD: 100000.00 | Estimated Cost: 5000000.00
Documents
Unlock the opportunities
Buy This Document @200/--
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
100000.00 -
Document Cost
500.00 -
Estimated Cost
5000000.00
BOQ Items Total Items : 53 | Total Qty : 8350
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Material and labour for complete cleaning of inside surface of Pressed steel tank (over a height of approx 20 mtr) with wire brush (including hammering, sand blasting to remove heavy rust) removing of mild scale and rust by application of rust removing chemical by brush and leave the surface to react for 15-30 Mins. Then the rusty surface will change their colour. After that remove the loose particles of rust by wire brush complete all as specified and directed. Make:- Sika Rustoff 100 or equivalent in Pidilite/ FOSROC | 935.00 | SQM |
| 2 | Material and labour for removal of old inter panel sealant and use a solvent free two component epoxy resin, mixing the component A and B at recommended ratio and prepare the sealing material and use it in between the jointing panel as sealant to assure all the interplate joints are sealed in appropriate manner complete all as specified and directed. Make:- Sika Guard 694F (I) or equivalent in Pidilite/ FOSROC) | 620.00 | RM |
| 3 | Material and labour for one coat food grade epoxy based Zinc rich corrosion protection primer by stirring the hardner and resin individually with mechanized strirrer of proper size. Then add the entire content of the hardner into Resin container and stir the two components throughly using a low speed mixer for about 2 to 3 minutes until a uniform colour of the mixture is obtained. One coat of 100 micron need to be applied on total inside steel surface and external surface where needed complete all as specified and directed. Make:- Sika Friazinc R or equivalent in Pidilite/ FOSROC) | 620.00 | SQM |
| 4 | Material and labour for coating with foodgrade coaltar epoxy resin (two part reaction hardening chemical resistant coating of low solvent content based on coal tar epoxy resin in combination with mineral fillers)after through mixing of a base and hardner, the mixed material is applied on the steel surface including second coat where it is needed. Since the pot-life is very short, application must be done very quickly (Inside of tank application only). complete all as specified and directed. Make:- Sika Interol poxitar or equivalent in Pidilite/ FOSROC) [Note: - For Item Ser No 1.00 to 4.00 here-in-before, all the chemical should be applied by authorised applicator of the manufacturer and five years guarantee certificate from manufacturer has to be obtained after treatment] | 570.00 | SQM |
| 5 | Taking down old corroded / rusted / wornout MS plate, angle, frame, tie rod, cleat, round MS pipe etc complete of any description not otherwise provided for by cutter or arc welding or gas cutting complete and kept aside for further disposal complete all as specified and directed. | 12.00 | QTL |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane