Tender for Raja Ramanna Centre for Advanced Technology Indore - NTID 29652124
Raja Ramanna Centre for Advanced Technology Indore
Indore, Madhya Pradesh, India
NTID 29652124
- Opening Date : Mon 26th December, 2022
- Closing Date : Mon 19th December, 2022
- ₹ 14300000.00
- NTID 29652124
Providing And Fixing False Ceiling And Acoustic Works For Central Complex Extension At Rrcat, Indore
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
286000.00 -
Document Cost
Refer Documents -
Estimated Cost
14300000.00
BOQ Items Total Items : 54 | Total Qty : 7176.7
# | Item | Quantity | Units |
---|---|---|---|
1 | Imp. Note - 1. The bidder must possess valid EPF & ESIC registration. The bidders need to deposit EPF & ESIC with appropriate authority. The reimbursement for EPF & ESIC deposit shall not be made. 2. The payment of wages to labourers should be made through bank. 3. The bidder must possess sufficient manpower & other resources (as detailed in SGF ) required for the timely completion of work. | ||
2 | Providing & fixing in true horizontal level M/F suspended false ceiling (FR-as per manufacturers specification) system manufactured by M/s Saint-Gobain Gyproc India using Gypsteel Ultra perimeter channels (27mm web and 20&30mm flange) fixed to wall with rawl plug and screws, at 610mm centres along the perimeter of ceiling, intermediate channels(45mm web and 15mm each flange) from the soffit at 900mm centre with ceiling angle( 25x10mm,0.55mm thick) fixed to soffit at 1220mm c/c with GI cleat and steel expansion fasteners to form a grid of 900mm x 1220mm ceiling section (51.5mm web and 26mm each flange) fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457.5mm centres. Single layers of 15mm tapered edge Gyproc Fireline fixed to ceiling section with screws at 230mm centres. Square and tapered edges of the boards to be jointed and finished flush look including filling and finishing with jointing compound, paper tape and two coats of drywall top coat etc complete as per drawings, specification and direction of the Engineer in charge. | ||
3 | False ceiling/masking suspended by anchor rods fixed with anchor fasteners and 15 mm tapered edge single layer Gyproc fireline board panel on one side.complete as per drawing, specifications and as directed by Engineer in charge | 400.00 | Sqm |
4 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, anchor rods, anchor fasteners etc all complete as per drawings, specification and direction of the Engineer in charge | ||
5 | 8 mm thick Calcium Silicate Board (plain/textured/perforated) made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process | 940.00 | Sqm |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane