Tender for INDIAN INSTITUTE OF MANAGEMENT - NTID 31443027
INDIAN INSTITUTE OF MANAGEMENT
Ahmedabad, Gujarat, India
NTID 31443027
- Opening Date : Mon 24th April, 2023
- Closing Date : Sat 22nd April, 2023
- ₹ 0.00
- NTID 31443027
Interior And Furniture Work Of Academic Block - 2 And Forum Tower At Indian Institute Of Management Ahmedabad.
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
450000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 42 | Total Qty : 565
# | Item | Quantity | Units |
---|---|---|---|
1 | Part-A Fit-out Works | ||
2 | Notes - 1) All interior work shall be manufactured from first class Sudan teak wood (as approved by the Architect and Engineer in charge), BWP IS-710 ply Grade E-1, 4mm thick veneer, 1 mm thick laminate, readymade fabric as per selection, exterior grade water base PU polish of approved shade as approved by the Architect and Engineer in charge. 2) Contactor shall prepare shop drawings for interior work and get them approved from the Architect and Engineer in charge. Contractor shall prepare sample or prototype of interior work for approval. Execution shall be carried out only as per approved samples. 3) Contractor shall be responsible for stability of all interior work items. 4) Contractor shall make provision and coordinate for any type of services as required. 5) Rate shall be inclusive of material, labor, accessories, consumable, fasteners, PU polish, termite treatment, floor protection for all level, all floor, all height, etc complete. | ||
3 | Partition with both side fabric panel and wooden batten Providing and fixing Acoustic strip type teak wood batten partition (150mm wide) as per attached concept design/ drawing. The partition work to be executed as per following provisions: 1) Wooden framing having 150mm x 25mm thick first class teak wood on all periphery and internal framing (as per required sizes) of first class teak wood kiln seasoned termite treated wood shall be provided in proper line and level. Wooden framing shall be fixed on existing kota stone floor with SS 304 anchor fastener of approved make and required capacity. Contractor shall take proper care of not breaking / damaging the existing kota flooring while anchoring. If any kota stone in flooring is damaged while anchoring / fixing / moving of furniture item, contractor shall make the same good as per existing adjacent kota stone flooring and as suggested by Engineer in charge. 2) 12mm thick IS 710 BWP plywood shall be fixed on the both side of wooden framing with SS 304 screws, fastener, adhesives etc. complete. 3) 12 mm thick soft board, covered with fabric of approved make and shade in required pattern to be fixed on ply paneling on both sides with help of screws, nuts, fasteners, adhesives etc. complete. 4) 25mm x 40mm (finished size) first class teak wood (kiln seasoned and termite treated) strips/ battens of even shade @ approx 75mm c/c shall be fixed in true line and level on plywood with fabric panel (both side of partition) as per drawing with help of screws, nuts, fasteners etc. complete. All wooden battens shall be of single piece and no joints shall be allowed in the same. 6) All wooden surfaces shall be polished with external grade water base PU polish of approved make, shade and finish. All wooden surface shall be pre-polished. If final coat shall be polished after fixing, contractor shall take care to protect the installed fabric as well as existing adjacent surfaces. The rate shall be inclusive of wooden framing, 12mm plywood, soft board with fabric, beading, teak wood battens, fastener, screws, adhesive, PU polish, scaffolding, sampling, mock up, rectifying and cleaning of adjacent surfaces etc. complete for all floor, all level and as directed by Engineer in charge. Contractor shall prepare shop drawings and get approval from Architect and Engineer charge prior to execution. Only out to out elevation area of partition including outer frame (one side only) shall be measured for payment. Basic rate of Fabric - Rs. 1500/sqm | 50 | No |
4 | Partition with both side plywood and veneer Providing and fixing veneer finish partition (150mm wide) as per concept design/ drawing. The partition work shall be executed as per following provisions: 1) Wooden framing having 150mm x 25mm thick first class teak wood on all periphery and internal framing (as per required sizes) of first class teak wood kiln seasoned termite treated wood shall be provided in proper line and level. Wooden framing shall be fixed on existing kota stone floor with SS 304 anchor fastener of approved make and required capacity. Contractor shall take proper care of not breaking / damaging the existing kota flooring while anchoring. If any kota stone in flooring is damaged while anchoring / fixing / moving of furniture item, contractor shall make the same good as per existing adjacent kota stone flooring and as suggested by Engineer in charge. 2) 12mm thick IS 710 BWP E-1 plywood shall be fixed on the both side of wooden framing with SS 304 screws, fastener, adhesives etc. complete. 3) 4mm thick veneer of approved make, shade, type and finish shall be fixed on ply surface on both side of partition. 4) All wooden surfaces shall be polished with external grade water base PU polish of approved make, shade and finish. All wooden surface shall be pre-polished. If final coat shall be polished after fixing, contractor shall take care to protect the installed fabric as well as existing adjacent surfaces. The rate shall be inclusive of wooden framing, 12mm plywood, veneer, beading, fastener, screws, adhesive, PU polish, scaffolding, sampling, mock up, rectifying and cleaning of adjacent surfaces etc. complete for all floor, all level and as directed by Engineer in charge. Contractor shall prepare shop drawings and get approval from Architect and Engineer charge prior to execution. Only out to out elevation area of partition including outer frame (one side only) shall be measured for payment. | 30 | No |
5 | Partition with ply/ flexi ply and veneer Providing and fixing veneer finish partition (150mm wide) as per concept design/ drawing. The partition work shall be executed as per following provisions: 1) Wooden framing (first class teak wood/ rubber wood/ any engineered wood kiln seasoned termite treated wood) shall be provided in proper line and level. Wooden framing shall be fixed with SS 304 anchor fastener of required capacity and of approved make on existing kota stone flooring. Contractor shall take proper care while anchoring in existing kota stone flooring. If any kota stone shall be damage while anchoring, contractor shall make good as per existing kota stone flooring and as suggested by Engineer in charge. Contractor to propose and provide additional framing member at curvature part as per approved shop drawing. 2) 12mm thick IS 710 BWP E-1 plywood shall be fixed on the one/ both side of wooden framing as per drawing with SS 304 screws, fastener of approved make. At curvature part, min 8mm flexi ply shall be used to achieve the shape as per drawing. 3) 4mm thick veneer of approved make, shade, type and finish shall be fixed on ply/ flexi ply surface on both side of partition. 4) All periphery shall be finished with first class teak wood (kiln seasoned and termite treated) member of 150mm wide and 25mm thick. Bottom member shall be fixed in flooring with required anchor. 5) All wooden surfaces shall be polished with external grade water base PU polish of approved make, shade and finish. All wooden surface shall be pre-polished. If final coat shall be polished after fixing, contractor shall take care to protect the installed fabric. The rate shall be inclusive of wooden framing, 12mm plywood, flexi ply, veneer, beading, fastener, screws, adhesive, PU polish, scaffolding, sampling, mock up etc. complete for all floor, all level and as directed by Engineer in charge. Contractor shall prepare shop drawings and get approval from Architect and Engineer charge prior to execution. Only out to out elevation area of partition including outer frame (one side only) shall be measured for payment. | 30 | No |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane